PITmode fusion – Your New Operating Mode Selection and Access Permission System

July 14, 2022

Your new operating mode selection and access permission system has arrived! Introducing the PITmode fusion by PILZ. PITmode fusion combines two areas that are inextricably connected on modern machinery: Safety and Security. “Safety” in terms of safety-related operating mode selection, as required in various C-standards, and “Security” in terms of user authentication and access protection.

More Information

For more information: https://www.pilz.com/en-CA/access

Related Story

PNOZmulti Configurator – the Original Tool for Your Safety Circuit Configuration
PITmode fusion - Your New Operating Mode Selection and Access Permission System

Your safety circuit is easy to create on the PC using the PNOZmulti Configurator. The configuration tool supports you with the project design, configuration, documentation and commissioning of Pilz controllers.

Related Articles

|

Decentralized Drives for Logistics Tasks – SEW-EURODRIVE

July 15, 2024 The Klosterbrauerei Andechs has installed a new returnable glass line. Watch this video to find out how this has increased production capacity while minimising the use of resources. With 70 decentralised MOVIGEAR® performance drive units from SEW-EURODRIVE, state-of-the-art, energy-efficient technology has been installed in the traditional brewery. This project was the first…

DCS First UKCA Certificate for myPNOZ Safety Realy 1 400

First UKCA Certificate for myPNOZ Safety Relay from PILZ

 

Pilz is the first company in Germany to receive from TÜV Süd the UKCA certificate for the modular safety relay myPNOZ. As such, myPNOZ will be accepted on the British market even after January 2023. In the wake of Brexit, the existing CE mark used in the European Union will be replaced in England, Wales and Scotland by the UKCA certificate. UKCA stands for United Kingdom Conformity Assessment and will be mandatory once the transition period expires at the end of 2022. From this point onwards, all products sold on the British market must have UKCA certification.

 

| |

Repair Instead of Replacing with Sinumerik One from Siemens

February 22, 2023 Reduce, reuse, and recycle are the watchwords of sustainable industries. However, until now, for many players in industry it was simply uneconomical to repair worn-out machine components. That’s changing with 3D metal printing machines from the CHIRON Group powered by Sinumerik One from Siemens. More Information Refurbishing instead of replacing Reduce, reuse,…

| |

HELUKABEL Automotive Cables

July 27, 2023 HELUKABEL Automotive Cables At HELUKABEL, they understand that the automotive industry demands cables that are designed for high performance and reliability. That’s why their cables are engineered to withstand the tough conditions of the automotive environment, from extreme temperatures to harsh chemicals. Whether it’s powering electronic systems or transmitting data, their cables…

|

ProSense Hash Duty Vibration Transmitters

March 15, 2023 The ProSense VCT series vibration transmitters accurately detect vibrations of industrial equipment, primarily rotating equipment such as pumps, motors, compressors, and rolling mills. Vibration sensors provide early detection of developing malfunctions, allowing for timely maintenance before major damage or failure results in costly repairs and production downtime. Vibration monitoring, also referred to…

| |

HPS Power Quality Products

January 16, 2024 HPS offers a full line of products to address power quality issues in your facility. Good power quality is important to maintain critical operations, improve energy efficiency and prevent premature equipment failure. Examples of poor power quality include harmonic distortion, reflected wave voltage, and low power factor. HPS Power Quality products include…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…