Type 3/12/4 Mild Steel Junction Box C3SC Series from Hammond Manufacturing

DCS Type 3 12 4 Mild Steel Junction Box C3SC Series from Hammond Manufacturing 1 400x275

October 3, 2022

 

Application

  • •Designed for use as a wiring box, junction box, terminal or pull box in indoor or outdoor applications where subject to windblown dust or rain.

Standards

  • •UL 508A Listed; Type 3, 4, 12
  • •cULus Listed per CSA C22.2 No 94; Type 3, 4, 12
  • •Complies with
    • •NEMA Type 3, 4 and 12
    • •IEC 60529, IP66

Construction

  • •14 gauge steel body up to 12″x12″; 12 gauge body when 30″x30″ or larger
  • •14 gauge steel cover up to 24″x24″; 10 gauge cover when 16″x16″ or larger
  • •Smooth, continuously welded seams without knockouts, cutouts, or holes
  • •Captivated stainless steel cover screws thread into sealed wells
  • •Seamless poured-in place gasket

Finish

  • •Enclosure and cover are finished with an ANSI 61 gray powder coating inside and outside
 
 
To learn more about the nwe mild steel junction boxes from Hammond Manufacturing, click here
Hammond Manufacturing Logo 300x150
 
 
 
 
 

Related Articles

| | | |

Universal Robots Education Programs: Become a Certified Training Centre

August 19, 2024 Calling all Automation Educators. Did you know your institution can become a Certified Universal Robots Training Centre? Cutting-edge robotic education programs from Universal Robots are available right now for your high schools and universities. These programs are designed to provide students with the essential skills needed for the modern workforce. Program Offerings…

| |

Rittal Presents its Wire Terminal WT C5 and C10

Innovations that allow wire processing at speeds ten times faster than by hand March 6, 2023 Fully automatic wiring processing goes one stage further. Rittal presents its Wire Terminal WT C5 and C10 innovations that allow wire processing at speeds ten times faster than by hand. Due to the modular system design and numerous option…

New Cylinder Becomes Seventh Member of Festo’s Simplified Motion Series

New Cylinder Becomes Seventh Member of Festo’s Simplified Motion Series

And then there were seven. The EPCE electric cylinder has become the seventh member of Festo’s Simplified Motion Series (SMS), a family of electric actuators that mimics the simplicity of pneumatics in performing simple point-to-point movements or positioning tasks. Each has an integrated servo drive, controller and electronics, and two on-board control options as standard: Digital I/O and IO-Link.

 

 

 

| |

Siemens Unveils Breakthrough in Automation Technology with New Simatic Workstation

May 15, 2024 Siemens, a leading technology company, has announced a breakthrough in the longstanding challenge of closely managing numerous hardware control points throughout the factory. The solution is the new Siemens Simatic Automation Workstation, which allows manufacturers to replace a hardware PLC, a conventional HMI and an edge device with a single, software-based workstation….

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…