SEW-EURODRIVE: Simple and Flexible I/O Expansion

November 17, 2020

Perfectly matched components are the key to efficient and high-performance machine automation. SEW-EURODRIVE offers a comprehensive product portfolio of all required components. From drive technology through control platforms to the human machine interface (HMI), SEW-EURODRIVE provides a finely scaled range of matched components, further enhanced and rounded off with the MOVI-PLC I/O system.

The MOVI-PLC I/O system expands the digital and analog interfaces of MOVI-PLC. Up to 32 modules per bus coupler can be connected via the system bus in the IP20 enclosure.

Accordingly, MOVI-PLC can automatically access a large range of inputs and outputs:

  •    –   MOVI-PLC I/O system
  •    –   I/Os integrated directly in MOVI-PLC
  •    –   I/O address of the inverter


The MOVI-PLC I/O system at a glance

  •    –   Powerful connection to MOVI-PLC via the machine module’s system bus
  •    –   Optimally integrated into the programming software PLC Editor of MOVITOOLS MotionStudio
  •    –   A variety of combination options makes for flexible and individual machine solutions
  •    –   Compact design and the modular structure reduce control cabinet space requirements to a minimum
  •    –   Quick and easy installation or replacement during startup or service

Source

Related Articles

AutomationDirect adds VFD / Servo Cable with Signal Pair

AutomationDirect adds VFD / Servo Cable with Signal Pair

VFD-SC series VFD (Variable Frequency Drive) / Servo cable offers 4 conductors, available in 16 AWG to 10 AWG gauges, plus a foil-shielded signal pair. The VFD-SC series is the same high-quality cable as the standard VFD-C series; the addition of the shielded 16AWG signal pair allows the cable to be used with motors and drives requiring brake control or feedback from devices like temperature or position sensors.

 

 

 

POSITAL: Safety First – Through Clever Design

POSITAL: Safety First – Through Clever Design

Sensor manufacturer POSITAL has introduced an inexpensive and flexible alternative for safety-critical motion control systems. Supplementing its existing range of formally certified SIL safety encoders, the new ‘diverse-redundant absolute encoders’, based on non-certified standard components, are an attractive choice for many installations where functional safety is required.

 

 

 

| |

New ASB160 Series 160 W, Full-Brick AC/DC Power Supplies from XP Power Reduce Failure Rates Using Effective Heat Exhaustion

March 31, 2023 XP Power’s ASB160 power supplies have a baseplate-cooled design that reduces failure rates through effective heat exhaustion XP Power’s ASB160 series low-profile, full-brick, baseplate-cooled AC/DC power supplies require no external components. The series includes a built-in EMC filter, AC fuse, and bulk storage capacitor, providing a complete AC/DC power solution ready for installation…

| |

SEMI F47 Compliance for Power Supplies

August 6, 2024 Complete portfolio has now been tested and verified for SEMI F47 compliance Thanks to their high power density, the Phoenix Contact Uno Power power supplies with basic functionality are ideal for use in compact control cabinets. The complete portfolio has now been tested and verified for SEMI F47 compliance. The Uno Power product range features efficient technology…

DCS Mersen Now Available Tube0Based Liquid Cooling Simulations 1 400

Now Available: Tube-based Liquid Cooling Simulations with R-TOOLS MAXX – The Next Generation Heat Sink Simulator

 

Mersen is pleased to announce that R-TOOLS MAXX, Mersen’s next generation heat sink simulator, is now available with tube-based liquid cooling simulations. R-TOOLS MAXX is a no charge, on-line simulation software that allows users to model the optimum air or liquid cooled heat sink solution tailored to their project requirements. It is completely interactive and available online 24/7. Users can enter the boundary conditions, heat source details, and their choice of flow conditions.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…