Sealcon Twilock-S Circular Connectors Makes “Child’s Play” Out of Difficult Access Areas

DCS-27-Sealcon-TwilockSConnectors-400.jpg

July 30, 2021

The Sealcon Twilock-S connection system is an extremely simple and highly reliable quick fastening system. Sealcon’s Twilock-S metric circular plug-in connectors mate to Speedtec by Intercontec/TE Connectivity making adaptivity between these two connector systems technically possible. All it takes is just one click, a slight twist and the plug-in system goes from “Open” to “Close”; making it child’s play to plug in a connector even where access is quite difficult.

Twilock-S is resistant to vibrational loads and guarantees protection of IP67/IP69K (connected). Twilock-S circular connectors are designed with multiple new features to accommodate changing industry demands such as a low-profile housing and right-angle connector that swivels to open and requires less vertical space. Sealcon has Twilock-S connectors in M23 (Signal), M23 (Power) and M40 (Hybrid) sizes. Spec in Twilock-S circular connectors for applications in: Renewable Energy, Motion Controls, Robotics and Conveyors.

With the vast array of options available with these Twilock-S circular connectors Sealcon has the configuration that you are looking for.

Source

Related Articles

APEM: Q25/Q30 Series

APEM: Q25/Q30 Series

Suitable for high pressure jet washdown, the Q25 and Q30 are a perfect fit for material handling or off-highway vehicle applications where reverse voltage and over voltage protection is required, and with low heat generation, these are suitable for mounting into heat sensitive plastics.

 

 

 

PB 55 Automation Pro2PowerSupplies 400

New WAGO Pro2 Power Supplies and DC-to-DC Converters From AutomationDirect

 

AutomationDirect has added WAGO Pro2 power supplies to their growing lineup of performance power products. These high-efficiency power supplies reduce losses, save cabinet space, and increase energy savings. With TopBoost, PowerBoost, and parameterizable overload behavior, WAGO Pro2 power supplies protect equipment and provide intelligent current and switching modes. The free configuration software includes long-term monitoring for maintenance and service, preventing costly downtime.

 

Festo Introduces the VEFC Mass Flow Controller for Precise Control of Inert Gases

December 3, 2024 The VEFC is designed for use in electronics manufacturing, food production, and anywhere shielding gas is required. Festo introduces the VEFC mass flow controller, the company’s latest entry into its Controlled Pneumatics family of solutions. The VEFC features precisely controlled flow of inert gases of up to 200 l/min and is one…

| | | | | | |

The New Commander C300 PM – Your Gateway to Higher Efficiency

April 3, 2024 Pumps and HVAC are two industrial areas where the Commander C300 PM excels Control Techniques announces an extension to its highly flexible general purpose Commander range – the Commander C300 PM. This new variant is designed to build upon the inherent high efficiency of sensorless permanent magnet (PM) motors, reducing running costs…

|

Beckhoff Launches Compact, Multi-I/O Interface for Endless Use Cases in One Device

August 21, 2024 The EL8601-8411 EtherCAT Terminal supports up to 12 signal interfaces and nine signal types in one multi-purpose I/O module Beckhoff’s new EL8601-8411 EtherCAT Terminal offers incredible interface flexibility in a compact, 12-mm-wide design. With up to 12 signal interfaces (8 x DI, 2 x DO, 1 x AI, 1 x AO) and…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Contactron Speed Starters: Phoenix Contact’s Game-Changing Solution for Modern Motor Control

    March 5, 2025 In industrial settings where efficiency and reliability are paramount, choosing the right motor control solution can make all the difference in operational performance. While traditional motor starters provide basic functionality and frequency converters offer advanced capabilities, many operations need something in between—a solution that combines simplicity with versatility. Phoenix Contact’s CONTACTRON Speed… Read More…

  • BiSS-C and SSI Encoder Interface Protocols Explained

    March 5, 2025 BiSS (Bidirectional Synchronous Serial) Interface, specifically the BiSS-C variant, is an open-source, real-time serial protocol designed for high-speed, bidirectional data transmission. Developed to improve upon traditional serial interfaces, BiSS-C supports efficient communication with absolute encoders, sensors, and other automation components. BiSS-C Key Features BiSS-C Applications SSI Protocol Overview Synchronous Serial Interface (SSI) is a widely… Read More…