Precise control of temperature processes

December 13, 2018

New software component for easy access to temperature control

With mapp Temperature, B&R offers temperature control that combines maximum usability and powerful control algorithms. Integrated simulation capabilities allow virtual commissioning in minutes. mapp Temperature also provides heating current monitoring.

With mapp Temperature, it is possible to define zones and groups for temperature control. A zone is a unit consisting of an actuator, a temperature process and a sensor for measuring the temperature. Multiple zones can be combined into a physical group and controlled and optimized together. This gives the user maximum flexibility and scalability to meet any temperature control requirement.

Autotuning and integrated simulation

If applications cover a wide temperature range, simple tuning is often not sufficient to optimally adjust the parameters. mapp Temperature therefore includes a multi-stage autotuning process. The user can define several operating points and optimize them individually. The integrated simulation capability enables simple virtual commissioning without any hardware. This option makes it possible to test the application’s logic, error handling and HMI system in advance to significantly accelerate on-site commissioning.

Heating current monitoring

B&R’s temperature control system also offers heating current monitoring to enable early detection of faults through predictive maintenance. By monitoring the current of the heating elements, it is possible to react to a fault at an early stage without stopping the entire process. This ensures a high level of operational reliability and helps prevent extended downtime.

For more information, visit https://www.br-automation.com/en-ca/company/press-room/precise-control-of-temperature-processes-10-12-2018/.

Related Articles

DCS MC IO Link Master Modules and Hib from AUtomation Direct 1 400

IO-Link Master Modules and Hubs at AutomationDirect

 

IO-Link is a powerful field I/O protocol capable of handling traditional field I/O along with diagnostic data from intelligent field devices including device health, configured parameters, and performance. IO-Link master modules are the interface between field devices and higher-level controllers/information systems, and they also control data traffic between the connected devices. Two IO-Link master modules are now available that convert IO-Link signals to/from EtherNet/IP, OPC UA, and MQTT.

 

|

ABB Integrates AquaMaster4 Flowmeter with Topkapi SCADA Software to Enhance Water Conservation Efforts

August 9. 2024 AquaMaster4 Mobile Comms provides near real-time data for intelligent water management ABB has integrated its AquaMaster4 Mobile Comms flowmeter with the Topkapi SCADA system, enhancing water conservation efforts around the world. AREAL, publisher of the Topkapi software platform, recently released a communication driver which allowed AquaMaster4 Mobile Comms to communicate directly with…

DCS Flexible High Speed Rootic Parcel Induction for Fast Accurate Order Fullfilment Yaskawa 1 400x275

Flexible, High-Speed Robotic Parcel Induction for Fast, Accurate Order Fulfillment from Yaskawa

 

Highly flexible, robust robotic automation provides fast, accurate parcel induction and singulation in dynamic, order fulfillment settings. Easily integrated with a wide range of traditional sortation and packaging applications, customized robotic solutions can facilitate fluid piece picking and placing of items onto conveyors for rapid material handling of boxes, polybags and padded envelopes of varying sizes.

 

DCS Gems Sensors Controls Universal Level Sensor 1 400

Gems Sensors and Controls Universal Level Senors Renewable Energy Application – Wind Turbine

 

The critical components and systems that make up a wind turbine need to be reliable. One common factor that limits useful life of these systems is continued stress on bearings, brakes, and gears. It is important to maintain proper fluid levels for optimal sustained performance, and to prevent occurrences that may result in expensive damage.

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…