New Thermal Videoscope Kits with Specialty Probe Options FLIR VS290™

New Project 2021 12 20T151725.605

December 20, 2021

 

The FLIR VS290 is an industrial thermal and visual videoscope system designed to help professionals quickly and safely find hidden faults and dangers in difficult-to-access locations. Featuring a 160 × 120 true thermal imager and FLIR MSX® (VSC-IR32 and VSC-IR33 probes), VS290 videoscopes give users the power to see and measure invisible hot spots before catastrophic equipment failures can occur. The small, sleek tips allow for easy inspection through tight or confined openings, improving productivity and reducing diagnostic time. The 2-meter side-viewing probe options are CAT IV 600V safety rated—perfect for underground electrical vault inspections. The 1-meter forward-viewing probe is a practical fit for general purpose equipment and building thermal scans. All are versatile tools for the most demanding environments in utility, manufacturing, and building maintenance applications.

  • INSPECT DIFFICULT-TO-REACH AREAS SAFELY

    Quickly find hidden faults from a safer distance using the 160 × 120 true thermal imager; 2-meter options include a built-in visual camera and worklight plus MSX (Multispectral Dynamic Imaging) detail enhancement.

New Project 2021 12 20T151734.686

  • IDENTIFY, DOCUMENT, AND SHARE

    Improve workflow and communicate potential issues before they become major problems using FLIR Thermal Studio.

  • VERSATILE, RUGGED, AND RELIABLE

    IP67 camera tips and the IP54 videoscope unit help protect against dust and water, and CAT IV 600V-rated probes help make electrical inspections safer.

 

AVAILABLE FLIR VS290 PROBE OPTIONS

Choose one or all three! They’re easily interchangeable and field replaceable.

• VS290-21: 1-meter probe with 19 mm rounded, forward-viewing tip; thermal camera
• VS290-32: 2-meter probe with 11 mm rectangular, side-viewing tip; thermal + visual camera + worklight
• VS290-33: 2-meter probe with 19 mm rounded, side-viewing tip; thermal + visual camera + worklight

 

For more information about the new FLIR Probe, click here 

 

Related Articles

DCS RFI PW Potable Water Rotorflow from Gems Sensors 1 400

RFI-PW Potable Water Rotorflow from Gems Sensors & Controls

 

The RFI-PW Series is a FDA-compliant molded nylon and epoxy RFI-Type Rotorflow for compatibility with potable water applications. Flow rate is estimated, or simply confirmed by viewing the speed of the turning, high visibility blue rotor. Either port may be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI-PW Potable Water Rotorflow sensors are easy to see, easy to install and easy to afford for potable water applications.

 

|

Festo’s DHOP Advances Lab Automation with High-Throughput Pipetting with Closed-Loop Control

March 21, 2023 The DHOP seamlessly integrates with Festo’s world-class mechatronic systems Festo’s new DHOP closed-loop pipette head for high-speed robotic pipetting applications delivers consistent volumes over a wide range of liquid viscosities. In so doing, it assures the utmost in automation flexibility, speed, and feedback where devices are frequently required to handle many liquids….

Xelity
|

Murrelektronik: Xelity IP20 Managed Gigabit Switches – Intelligent Networking

 

Switches perform central tasks in networks. As intelligent infrastructure components, they read incoming data and forward it to the port with the corresponding receiver. Murrelektronik’s IP20 Managed Switches allow Ethernet devices communicate with each other via network connections.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Thermal Imaging for Data Centres

    February 18,, 2025 Thermal Imaging for Data Centres Data centre maintenance teams have a big share in safeguarding the critical resource that customers and businesses depend upon. Fortunately, they have one secret weapon that enables them to spot issues in an early stage before they turn into big problems: FLIR thermal imaging. The data centre… Read More…

  • What Are Custom Enclosures and Why Might You Need One?

    February 18, 2025 In the world of industrial and commercial applications, custom enclosures play a critical role in protecting sensitive equipment and ensuring operational efficiency. But what exactly are custom enclosures, and why might you need one? Proax Technologies breaks it down. What Are Custom Enclosures? Custom enclosures are protective casings designed to house electrical, mechanical, or… Read More…