|

Murrelektronik 10Gbps Cat6a Ethernet Cables from AutomationDirect

February 6, 2023

Cat6a Ethernet Cables

AutomationDirect now offers Cat6a industrial Ethernet cables from Murrelektronik. These shielded cables include an M12 X-coded connection on one end and an RJ45 connection on the other.

The X-coded designation is commonly used with industrial vision systems. These high-flex industrial Ethernet cables are available in lengths up to 5m with transmission speed capability up to 10Gbps. These cables have a TPE (thermoplastic elastomer) jacket that is flame-retardant and chemical resistant.

The new Murrelektronik Cat6a Ethernet cables start at $66.00 (3.2ft/1m) and come with a one-year warranty.

More Information

Cat6a industrial Ethernet cables

Related Product

IO-Link Master Modules and Hubs at AutomationDirect

IO-Link is a powerful field I/O protocol capable of handling traditional field I/O along with diagnostic data from intelligent field devices including device health, configured parameters, and performance.

IO-Link master modules are the interface between field devices and higher-level controllers/information systems, and they also control data traffic between the connected devices. Two IO-Link master modules are now available that convert IO-Link signals to/from EtherNet/IP, OPC UA, and MQTT.

Related Articles

|

Mitsubishi Electric Automation, Inc.’s Networking and Compatibility Capabilities Provide Quality and Cost-Conscious Machine

December 22, 2023 Integrated Production Systems (IPS) develops a machine to produce anechoic foam for its customers by incorporating a complete Mitsubishi Electric solution including CC-Link IE TSN networking. Mitsubishi Electric Automation, Inc. is known for the quality, performance, and compatibility of its automation components. Because of this, Womack Machine Supply, Diamond Partner Distributor Elite…

DCS AutomationDirect Bimed Cabl Entry System and Cable Glands 1 400

Bimed Cable Entry Systems and Cable Glands from AutomationDirect

 

AutomationDirect has added BPA series split-frame and BRM series solid-frame cable entry systems and cable glands from Bimed.  Cable entry systems provide safe installation into enclosures or electrical equipment, securing cables and providing strain relief while maintaining enclosure sealing requirements. The BPA series cable entry system allows cables to be installed through an enclosure or other bulkhead surface without requiring disassembly of connectors from pre-made or terminated cables and without compromising environmental protections.

 

FLIR A310 – IR TEMPERATURE SENSORS FOR CRITICAL EQUIPMENT MONITORING

FLIR A310 – IR TEMPERATURE SENSORS FOR CRITICAL EQUIPMENT MONITORING

The FLIR A310 is a fixed-mounted thermal imaging cameras that can be installed almost anywhere to monitor your critical equipment and other valuable assets. The camera can safeguard your plant and measure temperature differences to assess the criticality of a given situation. This allows you to see problems before they become costly failures, preventing downtime and enhancing worker safety.

 

 

 

| |

Delta’s Energy-Saving Power and Liquid Cooling Solutions for AI and HPC Data Centers Unveiled at OCP Global Summit 2024

October 21, 2024 Delta, a global leader in power management and a provider of IoT-based smart green solutions, showcased a broad range of innovations designed to optimize the energy efficiency of AI and high-performance computing (HPC) data centers at the OCP Global Summit 2024. Highlights included the new HPR (High Power Rack) ORV3 power systems…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…