IO-Link Master Modules and Hubs at AutomationDirect

DCS MC IO Link Master Modules and Hib from AUtomation Direct 1 400

May 25, 2022

 

IO-Link is a powerful field I/O protocol capable of handling traditional field I/O along with diagnostic data from intelligent field devices including device health, configured parameters, and performance.

IO-Link master modules are the interface between field devices and higher-level controllers/information systems, and they also control data traffic between the connected devices. Two IO-Link master modules are now available that convert IO-Link signals to/from EtherNet/IP, OPC UA, and MQTT.

  • •The STRIDE IO-Link master will convert IO-Link data to EtherNet/IP messages (and vice-versa) so you can easily gain better insight into system performance using a well-established fieldbus protocol
  • •The Murrelektronik Premium master module provides the same advantages as the lower-cost STRIDE version, with the added capabilities of OPC and MQTT

IO-Link hubs are also available with up to 16 multifunctional DIO channels that allow standard sensors and actuators to connect to an IO-Link master using a single cable. IO-Link hubs provide an economical solution for a highly decentralized installation.

A variety of IO-Link capable photoelectric and proximity sensors are available that provide signal data as well as internal diagnostics for better insight into sensor performance. IO-Link master modules will also work with any 3rd party IO-Link-capable sensor/actuator.

IO-Link master modules start at $290.00 and hubs start at $180.00 , with a 2-year warranty provided for both. IO-Link enabled sensors start at $15.50 with select models offering a limited lifetime warranty. IO-Link master modules, hubs, and their connected sensors/actuators are easily integrated with Productivity PLCs using task libraries available in the Productivity Suite programming software.

DCS MC IO Link Master Modules and Hib from AUtomation Direct 2 400

 

 

 

 

To learn more about he IO-Link Master Modules from AutomationDirect, download the Product Overview by clicking here, or visit the Product Page by clicking here 

 

 

 

Related Articles

DCS-23-Danfoss-NovoConMLXL-400.jpg

Danfoss: NovoCon M, L and XL – Big News for Fans of IoT Solutions in Smart Building Concepts

Roughly 5 years ago Danfoss introduced NovoCon S, the first of its kind digital actuator specially designed for AB-QM pressure independent control valves (PICVs). At the time this was a revolutionary actuator for controlling flow’s through terminal units in hydronic HVAC applications.

 

 

 

| |

International Compliance – CE Marking and Services for Machinery

August 26, 2024 CE marking in accordance with current requirements, from a one-stop shop Pilz uses their proven expertise and comprehensive service to support you during the CE marking process. This is required for new or modified machinery being imported or put into service in the EU. Manufacturers have been obliged to carry out a…

|

Festo Develops a New Flexible Pipetting Solution

This new solution is capable of pipette dispenses from 20 microliters up to 20 milliliters. May 28, 2024 Festo is now showing customers and prospects several new life science automation innovations including the company’s wide-range flexible pipetting. Each of the new and customizable solutions combines Festo components into dynamic subsystems. Festo collaborates with OEMs and…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Thermal Imaging for Data Centres

    February 18,, 2025 Thermal Imaging for Data Centres Data centre maintenance teams have a big share in safeguarding the critical resource that customers and businesses depend upon. Fortunately, they have one secret weapon that enables them to spot issues in an early stage before they turn into big problems: FLIR thermal imaging. The data centre… Read More…

  • What Are Custom Enclosures and Why Might You Need One?

    February 18, 2025 In the world of industrial and commercial applications, custom enclosures play a critical role in protecting sensitive equipment and ensuring operational efficiency. But what exactly are custom enclosures, and why might you need one? Proax Technologies breaks it down. What Are Custom Enclosures? Custom enclosures are protective casings designed to house electrical, mechanical, or… Read More…