|

HPS Centurion™ D1 dV/dT Filters

DCS HPS Centurion D1 dvdt Filters 1 400x275

November 9, 2022

 

The HPS dV/dT filters are specifically designed for use between variable frequency drives (VFD’s) and motors when longer cable lengths are used.

The HPS Centurion™ D1 dV/dT filter combines an inductor and parallel resistor network to mitigate both high frequency components and voltage spikes between the VFD and motor.

The D1 can mitigate the effects of reflected wave voltages greater than what a reactor alone can accomplish. The D1 filter provides protection to the motor by slowing down the rate of voltage increase and minimizes the damaging peak voltages that occur within the motor’s windings and along the length of cables feeding the motor.

Witness real time testing of the HPS Centurion D1 in the HPS Power Quality lab.  Learn more here

 

Hammond Power Solutions Logo 300x150

 

 

 

 

Related Articles

|

Burner Management Systems for Safe Burner Control

May 16, 2023 Pilz burner management systems monitor and control all the functions of commercial and industrial gas and oil furnaces – from pre-purge through to operation of the main burner – all-in-one. You can choose between two high-performance systems, based on the complexity of the requirements and the number of burners. As the burner controller in…

Nord Drivesystems: Modular ATEX drives – Protection against gas and dust

Nord Drivesystems: Modular ATEX drives – Protection against gas and dust

Since 2003 NORD DRIVESYSTEMS has supplied standard-compliant ATEX drive solutions such as dust or gas explosion protected motors , gear units, and electronic drive technology for zones 1, 2, 21 or 22. On the basis of the specific requirements for the application, the drive specialist provides individual solutions with versions and equipment from a modular system.

 

 

 

Weidmüller RockStar: New HDC inserts with the innovative Quick Termination connection system

Weidmüller RockStar: New HDC inserts with the innovative Quick Termination connection system

 

With Quick Termination (QT), Weidmüller is revolutionising connection systems and bringing them to a whole new level. Stranded wires of 0.5 to 2.5 mm2 (AWG 20 to 16) without crimped-on wire-end ferrules can be easily inserted into the open connection point. “Click” – that’s all it takes to create a secure connection.

 

 

| |

ABB and Cap Clean Energy Collaborate to Help Sustainable Aviation Fuel Production Take Off

April 17, 2024 ABB has signed an agreement with Cap Clean Energy to collaborate on sustainable aviation fuel (SAF) production sites in the Canadian provinces of Manitoba, Saskatchewan and Alberta. As part of the Memorandum of Understanding (MoU), ABB will explore how its automation, electrification and digital technology – including the ABB Ability™ System 800xA® distributed…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…