Electromate: Introducing the World’s Most Compact 1500 Watt Integrated Servo Motor

November 2, 2020

JVL has recently developed a new and unique product in the field of integrated motor control. JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors.

New Compact Motor

The MAC1500 motor sets completely new standards for the performance and size of servo controls.  With a length of only 182mm for a 1500W motor with a torque of 4.78/14.3 Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm.  This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods.  So what about vibrations and temperature?  As with the other integrated servo motors in the range (50-4500W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

Power Supply and Energy Savings

Powering this motor is easy since it only requires connection of the main voltage of 3x400VAC through the M23 connectors.  Control voltage for the encoder and microprocessor circuitry is 24VDC:  In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage.  Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.

Other Advantages

One of the big advantages of using the integrated MAC1500 motor is that you don’t need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling and also installation errors between driver and motor are eliminated.  In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit.  Hence downtime is minimized and production is maximized.

For more information, visit HERE.

Related Articles

DCS SEW EURODRIVE New PK Temperature Sensor 1 400

SEW-EURODRIVE: Introduction of a New PK Temperature Sensor (PT1000) to Replace the KTY Temperature Sensors

 

SEW‑EURODRIVE will soon offer its customers the opportunity to use modern PT1000 temperature sensors for winding temperature analysis. The PT1000 temperature sensors serve as a replacement for the KTY sensors, which were discontinued by the manufacturer, and will be available for selection in numerous SEW‑EURODRIVE products under the option designation “PK.”

 

DCS HC10 Mobile Workstation Enabkes Flexible Production Environment 1 400x275

HC10 Mobile Workstation Enables Flexible Production Environments from Yaskawa

 

Compatible with the Yaskawa HC10, HC10DT, HC10XP and HC10DTP collaborative robots, the HC10 Workstation is an economical solution for integrating HC10 robots with the high-performance YRC1000 controller into a single package. This mobile station is well-suited for arc welding, assembly, machine tending, and pick and place tasks.

 

| |

ABB Expands Large Robot Family with Four Energy Saving Models, 22 Variants

July 21, 2023 ABB Robotics is expanding its large robot range with four new models and 22 variants offering more choice increased coverage and greater performance. The next generation models include the IRB 6710, IRB 6720, IRB 6730 and IRB 6740, suitable for payloads ranging from 150kg to 310kg, with a reach from 2.5m to…

| | |

Danfoss Power Solutions to Showcase Products “Powering the Future of Machine Performance” at IFPE 2023

February 10, 2023 Danfoss Power Solutions will showcase its range of hydraulic, fluid conveyance, and electrification products and services at the 2023 International Fluid Power Exposition, March 14-18, in Las Vegas, Nevada. At its booth, S80515, Danfoss will demonstrate how the company is “Powering the future of machine performance.” “Autonomy, electrification, connectivity, and digitalization aren’t…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…

  • Festo’s Solutions Prevent Contamination in Lithium-Ion EV Batteries

    December 18, 2024 By Krystie Johnston Festo is a trusted, single source supplier for all tasks involving automation of battery manufacturing. They offer a complete line of copper-free, zinc-free, and dry-room-compatible components for battery manufacturing. Today, approximately 95% of electric vehicles (EVs) and energy storage systems use conventional lithium-ion batteries, which require liquid electrolyte filling…. Read More…