| | |

Watertight Diecast Aluminum Enclosures w/ Flanges 1550ZF Series

cUL & UL Listed, Thick Wall

October 15, 2024

Watertight Diecast Aluminum Enclosures w/ Flanges 1550ZF Series
Unfinished versions are vibrafinished for a smooth outer surface.

Hammond’s 1550ZF series features the same rugged, thick-wall diecast aluminum enclosures as their long-standing 1550Z series, but with a tough welded-on bottom flange for easy mounting. Their new watertight 1550ZF Series Diecast Aluminum Enclosures are independently tested to meet IP66, IP67, and IP68 as well as NEMA Type 4, 4X, 12 and 13 ratings. The rugged diecast aluminum alloy enclosures are tough yet easy to machine

Key Features:

Watertight Diecast Aluminum Enclosures w/ Flanges 1550ZF Series
Black versions are finished with a tough, textured black powder coat.
  • Thick-wall diecast aluminum watertight electronic instrument enclosure.
  • Rugged diecast aluminum alloy is tough yet easy to machine.
  • Two piece tongue and groove construction for protection against access of dust and water.
  • Strong spot-welded bottom flange allows for easy mounting.
  • Unpainted version is vibra finished for a smooth surface with no sharp edges.
  • Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied outside and inside the enclosure.
  • Lid is secured with either two, four, or six stainless steel Philips head machine screws, depending on enclosure size.
  • Lid screws are outside the gasket protection area to eliminate the need for o-rings.
  • Lid screws are self-captivating on six sizes: 1550Z107F, 1550Z108F, 1550Z116F, 1550Z117F, 1550Z137F, and 1550Z139F. Lid holes are slightly undersized and threaded with the first installation. 
  • Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
  • Gasket has a temperature rating of -40°C to +150°C (-40°F to 302°F).
  • No internal ribs for easy installation of connectors without interference or additional milling.

Ratings:

Watertight Diecast Aluminum Enclosures w/ Flanges 1550ZF Series
Powder coated versions are finished inside and out, with cleared areas around the internal grounding points.
  • cUL and UL listed under file #E71073.
  • Independently tested to meet IP66, IP67, and IP68 as well as NEMA Type 4, 4X, 12 and 13 ratings.
    • Customers should conduct their own testing to determine suitability for any specific application.
  • All sizes except 1550Z101F carry an impact rating of IK08 per IEC62262.

Accessories:

  • Breather Kit
  • Small Rainproof ventillator
  • Pressure Compensation Plug
  • Liquid-Tight Cordgrips (Nylon)

Source

More Information

1550ZF Series Specification Sheet

Related Product

Watertight with Integrated Hinge R133-134 Series from Hammond Manufacturing

Hammond introduces the Rolec aluDOOR R133-134 Series of enclosures. A modern, premium, watertight enclosures offer an IP66/IP67/IP68/IP69K rating with included PUR gasket. Durable diecast aluminum and structurally integrated hinges. Many sizes and available.

Related Articles

DCS Piezo Motions Miniature Rotary Motor GEts a Big Upgrade 1 400x275

Piezo Motion’s Miniature Rotary Motor Gets a Big Upgrade

 

Piezo Motion recently announced an important update to its popular line of miniature rotary piezoelectric motors (the ‘RAS Series’). The new addition to the RAS motor family features almost twice the torque (4.5 mN.m) and fifty percent (50%) more speed (900 rpm) compared to the previous models while still maintaining the exceptional overall performance offered by the RAS series.

 

ABB Acquires Innovative Optical Sensor Company to Expand Smart Water Management Offering
| | | | | | |

ABB Energy Appraisals of Industrial Electric Motors Reveal Potential 2.1 Twh Lifetime Savings

November 23, 2023 From June to September 2023, ABB analyzed more than 2,000 industrial electric motors under its Energy Appraisal service and has identified an average energy saving of 31 percent • Audits of more than 2000 motor-driven systems found an average energy-saving potential of 31 percent per motor• Total lifetime energy savings are equivalent…

|

Practical Applications for Noark’s Molded Case Circuit Breakers

August 8, 2023 If your business is looking for ways to manage overcurrent faults in your electrical systems, Noark Electric’s Molded Case Circuit Breakers (MCCBs) are the perfect product solution. It is a requirement in electrical distribution systems to have Molded Case Circuit Breakers (MCCB), as they provide both overload protection as well as short-circuit protection. The main…

|

Omron Advances Panel Solutions with MY-GS-R Relay, Empowering Users with Enhanced Operational Visibility and Efficiency

October 17, 2023 The new MY-GS-R relay advances panel solutions with additions that allow users to verify the relay’s operational state with absolute certainty. Industry automation solutions provider Omron Automation Americas adds advancements to its’ panel solutions with the new MY-GS-R relay. This addition allows users to verify the operational state accurately, while encompassing the…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • The Future of Barcodes: Understanding the 2027 Digital Transformation

    January 17, 2025 In the world of industrial automation and manufacturing, a significant change is on the horizon. The familiar UPC barcode – a staple of product identification for nearly five decades – is evolving into a more sophisticated system. This transformation, known as “Sunrise 2027,” will revolutionize how businesses handle product identification, tracking, and… Read More…

  • High-Performance Drives for the Food Industry

    January 15, 2025 Food production is subject to the strictest of requirements. Operations in this highly sensitive hygienic environment must run smoothly to manufacture the large volume and diverse range of products efficiently and sustainably. What does this mean for companies that are active on a market characterized by fierce competition and high consumer expectations?… Read More…