ODVA Leadership Elected for 23rd Term
October 24, 2023
The leadership for ODVA’s 23rd term was elected and announced at the 22nd Annual Meeting of Members in El Vendrell, Spain on October 19, 2023. This brings to a conclusion a successful 22nd term that saw an ODVA MemberTM increase to 400 companies, a host of EtherNet/IP enhancements that address security, process automation, and Single Pair Ethernet (SPE), an increased focused on global cooperation, and an acceleration of digital communication and content including virtual learning and educational videos.
ODVA’s Board of Directors has top level responsibility for strategic planning and governance and is composed of senior executives from major industrial automation device and system vendors across the globe. In the 23rd term, the Board of Directors are:
- Rolf Birkhofer, managing director of Endress+Hauser Process Solutions for Endress+Hauser
- Jon DeSouza, president and CEO of HARTING Americas for HARTING
- Satoshi Kojima, general manager of network product management group, controller division for OMRON
- Davis Mathews, senior vice president of the Industry Management and Automation at Phoenix Contact USA for Phoenix Contact
- Scott Miller, vice president, Digital & Platform Technologies for Rockwell Automation
- Thomas Petersen, senior director of fieldbus and system integration for Danfoss
- Brian Reynolds, CTO, projects & automation solutions for Honeywell
- André Uhl, vice president of technology and architecture for Schneider Electric
The corporate leadership of the organization collectively defines and executes the strategic plan, oversees development and publication of technology and specifications, and is responsible for governance of the organization. In the 23rd term, ODVA’s corporate officers are:
- Al Beydoun, President & Executive Director
- Adrienne Meyer, Vice President of Operations and Membership
- Christopher Lynch, Corporate Secretary
- Scott Miller, Treasurer
- Joakim Wiberg, Chief Technology Officer
El Vendrell, Spain – October 19, 2023 – The leadership for ODVA’s 23rd term was elected and announced at the 22nd Annual Meeting of Members in El Vendrell, Spain on October 19, 2023. This brings to a conclusion a successful 22nd term that saw an ODVA MemberTM increase to 400 companies, a host of EtherNet/IP enhancements that address security, process automation, and Single Pair Ethernet (SPE), an increased focused on global cooperation, and an acceleration of digital communication and content including virtual learning and educational videos.
ODVA’s Board of Directors has top level responsibility for strategic planning and governance and is composed of senior executives from major industrial automation device and system vendors across the globe. In the 23rd term, the Board of Directors are:
- Rolf Birkhofer, managing director of Endress+Hauser Process Solutions for Endress+Hauser
- Jon DeSouza, president and CEO of HARTING Americas for HARTING
- Satoshi Kojima, general manager of network product management group, controller division for OMRON
- Davis Mathews, senior vice president of the Industry Management and Automation at Phoenix Contact USA for Phoenix Contact
- Scott Miller, vice president, Digital & Platform Technologies for Rockwell Automation
- Thomas Petersen, senior director of fieldbus and system integration for Danfoss
- Brian Reynolds, CTO, projects & automation solutions for Honeywell
- André Uhl, vice president of technology and architecture for Schneider Electric
The corporate leadership of the organization collectively defines and executes the strategic plan, oversees development and publication of technology and specifications, and is responsible for governance of the organization. In the 23rd term, the corporate officers are:
- Al Beydoun, President & Executive Director
- Adrienne Meyer, Vice President of Operations and Membership
- Christopher Lynch, Corporate Secretary
- Scott Miller, Treasurer
- Joakim Wiberg, Chief Technology Officer
ODVA’s Technical Review Board (TRB) oversees the development of technology and standards for the organization including approval of technology enhancements for inclusion in the ODVA specifications which encompass the Common Industrial Protocol or “CIP” and its network adaptations of CIP – including EtherNet/IP and DeviceNet®. In its 23rd term, the TRB representatives are:
- Joakim Wiberg, Chair, of HMS Networks
- Raj Bandekar of Honeywell
- Torben Bertelsen of Danfoss
- Mirko Brcic of Endress+Hauser
- Vivek R. Dave of HARTING
- Arulkumar Karuppanagounder of Schneider Electric
- Gregory Majcher of Rockwell Automation
- Kai Michel of Hilscher
- Toshiyuki Ozaki of OMRON
El Vendrell, Spain – October 19, 2023 – The leadership for ODVA’s 23rd term was elected and announced at the 22nd Annual Meeting of Members in El Vendrell, Spain on October 19, 2023. This brings to a conclusion a successful 22nd term that saw an ODVA MemberTM increase to 400 companies, a host of EtherNet/IP enhancements that address security, process automation, and Single Pair Ethernet (SPE), an increased focused on global cooperation, and an acceleration of digital communication and content including virtual learning and educational videos.
ODVA’s Board of Directors has top level responsibility for strategic planning and governance and is composed of senior executives from major industrial automation device and system vendors across the globe. In the 23rd term, ODVA’s Board of Directors are:
- Rolf Birkhofer, managing director of Endress+Hauser Process Solutions for Endress+Hauser
- Jon DeSouza, president and CEO of HARTING Americas for HARTING
- Satoshi Kojima, general manager of network product management group, controller division for OMRON
- Davis Mathews, senior vice president of the Industry Management and Automation at Phoenix Contact USA for Phoenix Contact
- Scott Miller, vice president, Digital & Platform Technologies for Rockwell Automation
- Thomas Petersen, senior director of fieldbus and system integration for Danfoss
- Brian Reynolds, CTO, projects & automation solutions for Honeywell
- André Uhl, vice president of technology and architecture for Schneider Electric
The corporate leadership of the organization collectively defines and executes the strategic plan, oversees development and publication of technology and specifications, and is responsible for governance of the organization. In the 23rd term, ODVA’s corporate officers are:
- Al Beydoun, President & Executive Director
- Adrienne Meyer, Vice President of Operations and Membership
- Christopher Lynch, Corporate Secretary
- Scott Miller, Treasurer
- Joakim Wiberg, Chief Technology Officer
ODVA’s Technical Review Board (TRB) oversees the development of technology and standards for the organization including approval of technology enhancements for inclusion in the ODVA specifications which encompass the Common Industrial Protocol or “CIP” and its network adaptations of CIP – including EtherNet/IP and DeviceNet®. In its 23rd term, the TRB representatives are:
- Joakim Wiberg, Chair, of HMS Networks
- Raj Bandekar of Honeywell
- Torben Bertelsen of Danfoss
- Mirko Brcic of Endress+Hauser
- Vivek R. Dave of HARTING
- Arulkumar Karuppanagounder of Schneider Electric
- Gregory Majcher of Rockwell Automation
- Kai Michel of Hilscher
- Toshiyuki Ozaki of OMRON
ODVA’s Market Advisory Committee (MAC) assesses the state and future of ODVA technologies, including their global and regional adoption and utilization. In its 23rd term, ODVA’s MAC representatives are:
- Joe Bastone of Honeywell
- Vivek Hajarnavis of Rockwell Automation
- Magnus Jansson of HMS Networks
- Arnold Offner of Phoenix Contact
- McKenzie Reed of HARTING
- Ryo Shimizu of OMRON
- Tonya Wyatt of Micro Motion (Emerson)
- Feiyan Zhao of Schneider Electric
El Vendrell, Spain – October 19, 2023 – The leadership for ODVA’s 23rd term was elected and announced at the 22nd Annual Meeting of Members in El Vendrell, Spain on October 19, 2023. This brings to a conclusion a successful 22nd term that saw an ODVA MemberTM increase to 400 companies, a host of EtherNet/IP enhancements that address security, process automation, and Single Pair Ethernet (SPE), an increased focused on global cooperation, and an acceleration of digital communication and content including virtual learning and educational videos.
ODVA’s Board of Directors has top level responsibility for strategic planning and governance and is composed of senior executives from major industrial automation device and system vendors across the globe. In the 23rd term, ODVA’s Board of Directors are:
- Rolf Birkhofer, managing director of Endress+Hauser Process Solutions for Endress+Hauser
- Jon DeSouza, president and CEO of HARTING Americas for HARTING
- Satoshi Kojima, general manager of network product management group, controller division for OMRON
- Davis Mathews, senior vice president of the Industry Management and Automation at Phoenix Contact USA for Phoenix Contact
- Scott Miller, vice president, Digital & Platform Technologies for Rockwell Automation
- Thomas Petersen, senior director of fieldbus and system integration for Danfoss
- Brian Reynolds, CTO, projects & automation solutions for Honeywell
- André Uhl, vice president of technology and architecture for Schneider Electric
The corporate leadership of the organization collectively defines and executes the strategic plan, oversees development and publication of technology and specifications, and is responsible for governance of the organization. In the 23rd term, the corporate officers are:
- Al Beydoun, President & Executive Director
- Adrienne Meyer, Vice President of Operations and Membership
- Christopher Lynch, Corporate Secretary
- Scott Miller, Treasurer
- Joakim Wiberg, Chief Technology Officer
ODVA’s Technical Review Board (TRB) oversees the development of technology and standards for the organization including approval of technology enhancements for inclusion in the ODVA specifications which encompass the Common Industrial Protocol or “CIP” and its network adaptations of CIP – including EtherNet/IP and DeviceNet®. In its 23rd term, ODVA’s TRB representatives are:
- Joakim Wiberg, Chair, of HMS Networks
- Raj Bandekar of Honeywell
- Torben Bertelsen of Danfoss
- Mirko Brcic of Endress+Hauser
- Vivek R. Dave of HARTING
- Arulkumar Karuppanagounder of Schneider Electric
- Gregory Majcher of Rockwell Automation
- Kai Michel of Hilscher
- Toshiyuki Ozaki of OMRON
ODVA’s Market Advisory Committee (MAC) assesses the state and future of ODVA technologies, including their global and regional adoption and utilization. In its 23rd term, ODVA’s MAC representatives are:
- Joe Bastone of Honeywell
- Vivek Hajarnavis of Rockwell Automation
- Magnus Jansson of HMS Networks
- Arnold Offner of Phoenix Contact
- McKenzie Reed of HARTING
- Ryo Shimizu of OMRON
- Tonya Wyatt of Micro Motion (Emerson)
- Feiyan Zhao of Schneider Electric
“ODVA is pleased to have achieved significant advances in TSN conformance test preparation, energy management collaboration, PA-DIM ownership, the launch of Ethernet-APL, and the availability of Process Device Profiles for EtherNet/IP over the course of the 22nd term,” said Dr. Al Beydoun, President and Executive Director at ODVA. “ODVA would like to thank the leadership, including the board of directors, the technical review board, and the market advisory committee, for their valuable contributions in making all of the valuable EtherNet/IP enhancements and strategic collaborations possible.”
Dr. Al Beydoun, President and Executive Director at ODVA
ODVA anticipates that it will announce the dates and location for its 2025 Industry Conference & 23rd Annual Meeting in Q2 2024.
About ODVA
ODVA is an international standards development and trade organization with members from the world’s leading automation suppliers. ODVA’s mission is to advance open, interoperable information and communication technologies for industrial automation. Its standards include the Common Industrial Protocol or “CIP™,” ODVA’s media independent network protocol – and industrial communication technologies including EtherNet/IP, DeviceNet and others. For interoperability of production systems and their integration with other systems, ODVA embraces the adoption of commercial-off-the-shelf, standard Internet and Ethernet technologies as a guiding principle. This principle is exemplified by EtherNet/IP – today’s leading industrial Ethernet network. Visit ODVA online at www.odva.org.
Related Story
ODVA Conformance Testing Available for EtherNet/IP Devices on the Ethernet-APL Physical Layer for Process Automation
Recently, ODVA conformance testing is now available for EtherNet/IP network-enabled devices that communicate over the Ethernet-APL physical layer. Conformance testing verifies the Ethernet-APL physical layer functionality by checking that the different port types properly adhere to the relevant specifications. The EtherNet/IP communication network functionality is also confirmed as a part of this process. Together, both tests ensure maximum interoperability between vendors as well as different types of instruments and infrastructure components. The availability of complete EtherNet/IP over Ethernet-APL conformance testing is the final step for ODVA to make the benefits of Ethernet available at the field level in the process industries.
