Expanded Communications and Analog I/O Capabilities for the BRX PLC

Expanded Communications and Analog I/O Capabilities for the BRX PLC

New expansion I/O modules from AutomationDirect for the BRX stackable micro brick PLC include communications modules, universal analog I/O modules, and universal temperature combination I/O modules. Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller, creating a sturdy and rugged PLC platform.

 

 

 

Danfoss Announces a Comprehensive Range of R32-Qualified Components

Danfoss Announces a Comprehensive Range of R32-Qualified Components

In response to a global shift away from R410A and R22, Danfoss has added a complete portfolio of components to help OEMs develop air conditioning systems with R32. With its relatively low global warming potential (GWP) at GWP-675, high volumetric capacity and efficiency, lower purchase price and system charge, R32 has become one of the most popular alternatives—along with R452B and R454B—to R410A for commercial air conditioning systems and heat pumps.

 

 

 

Regal Beloit: Grove Gear Stainless Steel Worm Gear Reducer Receives IP69K Certification

Regal Beloit: Grove Gear Stainless Steel Worm Gear Reducer Receives IP69K Certification

Regal Beloit Corporation, a manufacturer of electric motors, electrical motion controls, power generation and power transmission components, had recently announced that its Grove Gear Stainless Steel Worm Gear Reducer has achieved third party IP69K certification. Ingress Protection (IP) Marking rates the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact and water.

 

 

 

B&R Automation: Vertical Mounting Saves Space

B&R Automation: Vertical Mounting Saves Space

B&R’s intelligent track system SuperTrak is now available in a vertical-mount variant. This helps to optimize the output per square meter of floor space. If products are only transported on the upper side of the SuperTrak, the weight is not supported magnetically. Instead the load is transferred directly to the rollers. The shuttles have a much higher payload capacity.

 

 

 

Carlo Gavazzi: Dynamic Motor Starters for 1-Phase Scroll Compressors and Submersible Pumps

Carlo Gavazzi: Dynamic Motor Starters for 1-Phase Scroll Compressors and Submersible Pumps

CARLO GAVAZZI has launched the HDMS Series, a single-phase motor soft-starter. It is an ideal solution for systems used in areas with weak power grids. Its unique design and control algorithm eliminate the need for a traditional start capacitor, effectively increasing reliability. This same innovative control strategy allows the HDMS to easily start Capacitor Start / Capacitor Run (CSCR) motors, and in the case of Permanent Split Capacitor (PSC) motors, virtually eliminate the starting current.

 

 

 

Balluff’s New Magnetic Encoders Easily Integrate with Siemens Motion Control Systems

Balluff’s New Magnetic Encoders Easily Integrate with Siemens Motion Control Systems

Balluff’s new absolute magnetic linear encoders with Siemens Drive-Cliq interface are designed to integrate perfectly into Siemens motion controller environments. Plug-and-play installation makes incorporating them into the drive system easy. The controller automatically detects the sensor and its basic settings.

 

 

 

Endress+Hauser Prosonic G Flowmeters Redefine Process Gas Measurement

Endress+Hauser Prosonic G Flowmeters Redefine Process Gas Measurement

The new, exceptionally robust Endress+Hauser Proline Prosonic Flow G 300/500 flowmeters with optional integrated pressure and temperature sensors provide highly accurate, real-time values in even the most demanding environments. The Prosonic Flow G measures both dry and wet gases – natural gas, process gas or gas mixtures, either offshore or onshore – using ultrasonic flow measuring technology that has proven its reliability in decades of experience in the oil and gas as well as chemical industries.

 

 

 

Yaskawa America, Inc. Introduces Innovative Microdrive

Yaskawa America, Inc. Introduces Innovative Microdrive

The Drives & Motion division of Yaskawa America, Inc. proudly introduces the GA500 Industrial Microdrive, reflecting Yaskawa’s continued customer commitment to providing sustainable, flexible, and easy-to-use products. “This drive builds on the deep history of Yaskawa’s product quality,” Ed Tom, Product Manager, said. “The GA500 provides high reliability with its design to deliver a minimum of 10 years of continuous operation.”

 

 

 

DPDM Multimount: Festo’s smallest, lightest and easiest-mounting compact cylinder

DPDM Multimount: Festo’s smallest, lightest and easiest-mounting compact cylinder

The new DPDM Multimount compact cylinder is Festo’s smallest, lightest and most economical choice yet in its class. It’s ideal for many applications compact cylinders perform, such as stopping or stabilizing small work pieces or work platforms in light manufacturing. It’s noticeably smaller than Festo’s widely used DMM compact cylinder and unique for the variety of ways it can be fastened in place directly. It can be mounted at the front or rear, vertically or horizontally, hence the “Multimount” in its name.

 

 

 

SEW-EURODRIVE: Generation X.e – Helical Gear Units / Bevel-Helical Gear Units

SEW-EURODRIVE: Generation X.e – Helical Gear Units / Bevel-Helical Gear Units

Durability, finely graduated sizes, and an invertible housing are the characteristics of our tried and tested X-series industrial gear units. The new Generation X.e is based on these features and impresses with its added efficiency, experience, and excellence : Because these industrial gear units can be adapted individually and precisely to the respective requirements of your particular application, both in terms of operation and the surroundings.