Pfannenberg, Inc., a global manufacturer of thermal management technologies, has recently announced the PMF LED-Hi LED multifunction light, ideal for both indoor and outdoor use in industrial environments, including automotive, plant construction and logistics, open-cast mining, heavy industry, and maritime applications.
Regal Beloit Corporation, a manufacturer of electric motors, electrical motion controls, power generation and power transmission components, had recently announced that its Grove Gear Stainless Steel Worm Gear Reducer has achieved third party IP69K certification. Ingress Protection (IP) Marking rates the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact and water.
B&R’s intelligent track system SuperTrak is now available in a vertical-mount variant. This helps to optimize the output per square meter of floor space. If products are only transported on the upper side of the SuperTrak, the weight is not supported magnetically. Instead the load is transferred directly to the rollers. The shuttles have a much higher payload capacity.
CARLO GAVAZZI has launched the HDMS Series, a single-phase motor soft-starter. It is an ideal solution for systems used in areas with weak power grids. Its unique design and control algorithm eliminate the need for a traditional start capacitor, effectively increasing reliability. This same innovative control strategy allows the HDMS to easily start Capacitor Start / Capacitor Run (CSCR) motors, and in the case of Permanent Split Capacitor (PSC) motors, virtually eliminate the starting current.
ABB presents its new MegaFlex solution offering the most resilient and compact uninterruptible power supply (UPS) system on the market with a reduced footprint of up to 45 percent. With enterprise demand driving more SaaS (Software as a Service) and IaaS (Infrastructure as a Service) applications, data center continuity has never been more critical.
Balluff’s new absolute magnetic linear encoders with Siemens Drive-Cliq interface are designed to integrate perfectly into Siemens motion controller environments. Plug-and-play installation makes incorporating them into the drive system easy. The controller automatically detects the sensor and its basic settings.
The new, exceptionally robust Endress+Hauser Proline Prosonic Flow G 300/500 flowmeters with optional integrated pressure and temperature sensors provide highly accurate, real-time values in even the most demanding environments. The Prosonic Flow G measures both dry and wet gases – natural gas, process gas or gas mixtures, either offshore or onshore – using ultrasonic flow measuring technology that has proven its reliability in decades of experience in the oil and gas as well as chemical industries.
The Drives & Motion division of Yaskawa America, Inc. proudly introduces the GA500 Industrial Microdrive, reflecting Yaskawa’s continued customer commitment to providing sustainable, flexible, and easy-to-use products. “This drive builds on the deep history of Yaskawa’s product quality,” Ed Tom, Product Manager, said. “The GA500 provides high reliability with its design to deliver a minimum of 10 years of continuous operation.”
The new DPDM Multimount compact cylinder is Festo’s smallest, lightest and most economical choice yet in its class. It’s ideal for many applications compact cylinders perform, such as stopping or stabilizing small work pieces or work platforms in light manufacturing. It’s noticeably smaller than Festo’s widely used DMM compact cylinder and unique for the variety of ways it can be fastened in place directly. It can be mounted at the front or rear, vertically or horizontally, hence the “Multimount” in its name.
Durability, finely graduated sizes, and an invertible housing are the characteristics of our tried and tested X-series industrial gear units. The new Generation X.e is based on these features and impresses with its added efficiency, experience, and excellence : Because these industrial gear units can be adapted individually and precisely to the respective requirements of your particular application, both in terms of operation and the surroundings.
ABB recently announced the launch of its Induction xP Plus actuator for paper and packaging manufacturers seeking a powerful, efficient, rapid-acting and safe method for controlling caliper on paper machines calenders. Induction xP Plus rapidly ensures efficient heating up to 100 kW/meter in a highly-targeted area, providing unmatched flexibility for power density and heating zone width.
WEG is a traditional supplier of solutions in speed variation, manufacturing all the parts of a system: Input switchgear, transformer(dry-type or oil-type), frequency inverter and electric motor. The MVW01 is designed to control medium voltage induction motors. It features unique innovations, combining hardware robustness with simplicity, reliability and safety in a compact solution with few components and state-of-the-art technology.
The Drives & Motion Division of Yaskawa America, Inc. proudly introduces the GA500 Industrial Microdrive, reflecting Yaskawa’s continued customer commitment to providing sustainable, flexible, and easy-to-use products. It is designed to meet RoHS2, providing a sustainable and environmentally friendly drive. The TUV safety rating allows our customers to meet the most stringent safety ratings for their machine and provides a long mission time for the life of their equipment.
The new Allen-Bradley E100 Electronic Motor Overload Relay can help industrial companies better protect their motors and avoid unplanned downtime. As the next generation of Allen-Bradley electronic overload relays, it more accurately measures a motor’s current load, models its temperature and shuts the motor off when it’s in danger of damage due to overheating.
Festo designed the new space-saving, flat, DLGF rodless linear drive as a very economical choice for applications where installation space is especially tight, like in electronics, small parts assembly, packaging and handling technology. Since those space considerations can also make a pneumatic drive harder to adjust or service, Festo also made its proprietary self-adjusting end-cushioning (PPS) standard with DLGF. Self-adjusting cushioning saves time and makes processes more reliable; the drive is always providing the correct cushioning.
FLIR Systems, Inc. recently announced the FLIR CM94 2000-amp AC/DC electrical utility clamp meter. Designed to tackle high current electrical measurements in demanding utility and industrial job sites, the CM94 features an oversized jaw to easily manage larger conductors and busbars. With CAT IV-1000-volt overvoltage protection, the CM94 works on relays, distribution panels, vaults, switchgears and switchboards, as well as on service conductors, feeders, and production power lines.
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
