DCS Siemens SINAMICS G115D Distributed Drive System 1 400

New SINAMICS G115D Distributed Drive System Specifically Designed for Conveyor Applications from Siemens

 

Comprised of the drive, motor and gear box, this new distributed drive system is available as a complete solution for motor-mounted and wall-mounted horizontal motion control conveyor applications. With its new SINAMICS G115D, Siemens is introducing a new, compact and powerful drive system specifically designed for horizontal conveyor applications.  The drive system comprises the motor, drive, and gearbox in one unit and is offered in two versions — wall-mounted and motor-mounted.

 

DCS Siemens New Simotics SD200 Frame Size 440 Low Voltage 1 400

New Simotics SD200 Frame Size 440 Low-Voltage, Severe-Duty AC Motors Now With 75-800 Hp Output from Siemens

 

Siemens announces the immediate availability of the SIMOTICS SD200 severe-duty motor in frame size 440 as its latest offering in the low-voltage SIMOTICS motor family. Cast-iron motors meet or exceed NEMA Premium® efficiency standards for oil-and-gas/petrochemical, pulp-and-paper, grain and rock processing, and other harsh environments.

 

 

DCS Digi Key Announces partnership w EPC Space 1 400

Digi-Key Announces Global Distribution Agreement with EPC Space

 

Digi-Key Electronics, which offers one of the world’s largest selection of electronic components in stock for immediate shipment, recently announced that it has secured a global distribution agreement with EPC Space’s line of radiation hardened (rad hard) GaN-on-silicon transistors and ICs, which are packaged, tested, and qualified for satellite and high-reliability applications. EPC Space technology produces GaN devices that are smaller, have lower resistance, and have many times superior switching performance compared to silicon solutions.

 

DCS RWs Bellows Coupling with Fully Split Clamping Hubs 1 400

R+W’s Bellows Coupling with Fully Split Clamping Hubs – Model BKH

 

The BKH series is a high precision coupling with fully split clamping hubs that allow for easy lateral installation and removal without the need to move or re-align connected components. It features a stainless-steel bellows with very high torsional stiffness and low moment of inertia, making it ideal for high precision and highly dynamic machines. The bellows coupling can be used in a variety of applications where positional accuracy is of utmost importance, performance data is being measured, or fast reversals are a common occurrence.

 

DCS Danfoss TD1 Thermostatic Expansion Valve 1 400

Danfoss’ TD1 Thermostatic Expansion Valve Now Has a Sustainable Stainless-Steel Design

 

 

Built on a foundation of precise superheat control, the Danfoss TD1 thermostatic expansion valve now features a more sustainable stainless-steel capillary tube and sensing bulb. As part of our industry-leading portfolio of low- and ultra-low GWP compliant solutions, the TD1 delivers up to 15% more energy savings and up to 20% reduction in pull-down time under actual operating conditions compared to capillary tubes.

 

DCS MENNEKE Sloped Top Stainless Steel Disconnects 1 400

Sloped-Top Stainless Steel Disconnects Now Offer Control Switch from Mennekes

 

In MENNEKES’ last blog post, they discussed their non-metallic, curved-top CDS disconnect switches with an optional three-position selector switch, saving valuable installation space, reducing parts and improving safety for maintenance personnel. These same features and benefits also extend to their sloped-top stainless steel motor disconnects, which incorporate a 15-degree sloped roof to facilitate liquid run-off in washdown applications.

 

DCS SEW EURODRIVE Industrial Gear Units To Go 1 400

New SEW-EURODRIVE Industrial Gear Units To Go

 

In addition to robustness, individuality and high torque, industrial gear units are often associated with long delivery times. We are now bringing an end to these long delivery times. Our delivery time offer ATO 5 is now joined by ETO 15. For you, we will be faster and deliver your solution promptly – whether from our modular system or with customer-specific adaptations.

 

DCS HELUKABLEs MULTIFLEX 512 PUR ULCSA Receives NEK Rating 1 400

HELUKABEL’s MULTIFLEX 512®-PUR UL/CSA Receives NEK 606 Approval

 

HELUKABEL, an international manufacturer and supplier of cables, wires and cable accessories, recently announced its MULTIFLEX 512®-PUR UL/CSA and its shielded variant (MULTIFLEX 512®-C-PUR UL/CSA) are now certified according to the internationally recognized Norwegian Electrotechnical Committee (NEK) standard TS 606, which defines the requirements for halogen-free cables that are resistant to drilling mud. This approval is found primarily in applications associated with the oil and gas industry. 

 

DCS Easylaser Now Presenting XT20 andXT22 User Friendly Precision Laser 1 400

New Easy-Laser® XT20 and XT22 – User-Friendly Precision Laser Transmitters!

 

One of the most important things during a machine installation is to ensure the flatness of the base. With the new XT20 and XT22 we have facilitated handling, which makes for faster measurements and fewer fault sources. More reliable machine installation, put simply. Both transmitters can be used for flatness and straightness measurement. In addition, the XT22 can direct the laser beam at 90 degrees to the laser plane, which means you can solve virtually all types of geometric measurement jobs. The area of use therefore does not stop at measuring the flatness of bases. The XT22 also has a higher technical specification for straightness thanks to fiber laser technology, and can take measurements at distances up to 40 m. The XT20 can take measurements at distances up to 20m but is also IP55 rated water and dust proof.    

 

DCS SEW EURODRIVE New PK Temperature Sensor 1 400

SEW-EURODRIVE: Introduction of a New PK Temperature Sensor (PT1000) to Replace the KTY Temperature Sensors

 

SEW‑EURODRIVE will soon offer its customers the opportunity to use modern PT1000 temperature sensors for winding temperature analysis. The PT1000 temperature sensors serve as a replacement for the KTY sensors, which were discontinued by the manufacturer, and will be available for selection in numerous SEW‑EURODRIVE products under the option designation “PK.”

 

DCS Gems Sensors FS B Bidirectional Flow Switch 1 400

FS-B Bidirectional Flow Switch from Gems Sensors & Controls

 

This inline flow switch is a flow/no flow device with the ability to detect flow in either direction. It is key for applications where detection of flow direction is desirable or where undesired reverse flow is possible and must be prevented to avoid system damage. The FS-B is capable of rigorous application demands, high temperatures, media compatibility, and low pressure drop.

 

DCS SEW EURODRIVE New DR Series AC Motors 1 400

New DR Series AC Motors (1 speed) from SEW-EURODRIVE

 

SEW-EURODRIVE offers you the ideal AC motor for any requirement: 2, 4, 6 and 8-pole motors, with powers of 0.09 kW to 375 kW and in the efficiency classes IE1 to IE4. Test them and the motors of the DR/DRN/DR2 series in line or inverter operation! DR/DRN/DN2 three-phase AC motors are efficient, powerful and usable worldwide. With the DR/DRN/DR2 modular motor systems, they implement millions of drive combinations and move different systems and machines, worldwide.

 

DCS Automation Direct Murrelektronik M12 Data Cables Now Available 1 400

Murrelektronik M12 Data Cables, Power Cables, and Field Wireable Connectors from AutomationDirect

 

New Murrelektronik data cables are high-flex shielded Ethernet Cat5e cables offering various connector styles, including D-coded M12 to M12, M12 to RJ45, RJ45 to RJ45, and M12 to pigtail. These cables are flame-retardant and chemical resistant with a tough TPE (thermoplastic elastomer) jacket for typical industrial applications.

 

DCS Omron Robotics Integrated Cojntroller 1 400

Robotics Integrated Controller from Omron

 

An all-in-one control platform for applications requiring high-speed processing, machine control, safety, reliability, and maintainability. The Omron Robotics Integrated Controller (IC) perfectly synchronizes automation technology so that customers can improve the speed and accuracy of their production, simulate entire production lines, simplify maintenance, and reduce time-to-market.

 

DCS Allied Electronics Offers Banners Innovative Snap Signal IIoT and New DXMR90 Controller 1 400

Allied Electronics & Automation Offers Banner Engineering’s Innovative Snap Signal IIoT Solutions, Including the New DXMR90 Industrial Controller

 

Allied Electronics & Automation now offers Banner Engineering’s Snap Signal portfolio of modular, brand agnostic, plug-and-play IIoT solutions, including the new Snap Signal DXMR90 industrial controller. Banner’s Snap Signal solutions are designed to leverage machine data from automation islands scattered throughout the factory floor, convert disparate data signals from both condition monitoring and process monitoring solutions into a unified protocol and transmit that insightful diagnostic data to a dedicated PLC or SCADA control system for local processing or an edge device used to monitor equipment conditions in the cloud. 

 

DCS Banner Expandable Safety Controller XS26 2 1 400

Expandable Safety Controller Now Available with Banner In-Series Diagnostics

 

An enhanced version of Banner’s XS26 Safety Controller is available with built-in In-Series Diagnostics (ISD). This technology simplifies installation, provides comprehensive real-time data about automation safety equipment, and prevents or reduces downtime. The expandable XS26-ISDd allows users to configure and monitor up to 394 connected safety devices—such as E-stop buttons, safety switches, safety light screens, two-hand controls, and rope-pull switches—and controls up to 68 independent safety outputs. It is a cost-effective solution to meet machine-safeguarding requirements, with the flexibility to grow with expanding production and future technology enhancements.