DCS EZOps Announces Second Release of Augmented Intelligence Platofrom for Oil and Gas 1 400

EZ Ops Announces the Second Release of its Augmented Intelligence Platform for Oil and Gas with Dynamic Routing

 

EZ Ops, the provider of oil and gas operations software that identifies top priorities to produce the cleanest and most profitable hydrocarbons in the world, has announced the second release of its augmented intelligence operations platform with new capabilities for dynamic routing and day scheduling. EZ Ops latest platform release helps operators efficiently plan their daily schedule in under three minutes with certainty they are doing highest value work during their shift, with the least drive time and lowest greenhouse gas emissions.

 

DCS MENNEKES New SDS Motor Disconnects 1 400

New SDS Series Stainless Steel Motor Disconnects from MENNEKES

 

 MENNEKES’ latest stainless steel motor disconnects, the SDS Series, are available 30A, 60A and 100A and come standard with Early Break and Late Make auxiliary contacts. Complinace and performance features include suitable as motor disconnect per 2002 NEC Artilce 430-109, UL Standard 508 Assemblies, Environmental NEMA Type 4X; 12; IP69K, and UV Resistance, to name a few. Check out their video to learn more.

 

DCS MELTRIC Announces New DSN100 Plud and Ply Receptacle 1 400

MELTRIC Announces New Product Release of DSN100 Plug and Receptacle

 

MELTRIC recently announced DSN100, a new 100 A plug and receptacle. This new model is a Switch-Rated, 100 A, 600 VAC plug and receptacle fitted with DECONTACTORTM technology for peak performance and user safety. This technology allows their Switch-Rated plugs and receptacles to be safely connected and disconnected under full load, up to 200A and 100 hp, in wet or dry conditions. They combine the safety and functionality of a disconnect switch with the convenience of a plug and receptacle in one device.

 

DCS New Control Element PIToe USB from PILZ 1 400

New: Control Element PIT oe USB – Activatable USB Interface for Plant and Machinery from PILZ

 

 The activatable USB 2.0 host interface on the PIT oe USB enables tamper-proof import of programs and removal of data. A keyboard or mouse can also be connected. The USB port is activated via a 24 V signal; the “ready for operation” state is displayed via the LED ring.

 

DCS Kollmorgen Introduces a New Generation of Robot Ready Framelss Motors 1 400

Kollmorgen Introduces a New Generation of Robot-Ready Frameless Servo Motors

 

Kollmorgen, a global leader in motion control systems, recently announced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

 

DCS Rockwell Automation Introduces New On Machine Drives 1 400

Rockwell Automation Introduces New On-Machine Drives

 

Rockwell Automation, Inc., one of the world’s largest companies dedicated to industrial automation and digital transformation, recently announced the release of its new Allen-Bradley Armor PowerFlex AC variable frequency drives for industrial motor control applications. The on-machine drives provide quicker installation, simple commissioning and predictive maintenance. 

 

DCS Rockwell Automation Medium Voltage Drive Enclosure 1 400

Rockwell Automation Medium Voltage Drive Enclosures Now Available for Rugged and Remote Outdoor Installations

 

PowerFlex 6000 medium voltage variable frequency drives (VFDs) packaged in Type 3R or IP54 enclosures are specifically designed and built for outdoor or remote installations to eliminate the need for a control room. The PowerFlex 6000 drive technology is suited for all-purpose, non-regenerative applications such as fans, pumps, compressors, mills and flat-land conveyors.

 

DCS MQTT Protocol Support Added to Productivity Sereis CPUs Automation Direct 2 400

MQTT Protocol Support Added to Productivity Series CPUs EDS File Library Added to Productivity Suite Programming Software

 

The Productivity family of controllers now offers the MQTT protocol for connections to cloud computing platforms. MQTT has become the front-runner for many machine-to-machine (M2M) and IIoT/cloud networking applications, due to its lightweight overhead and reduced bandwidth consumption. Productivity PLCs now support MQTT communication and with the fill-in-the-blank MQTT messaging configurations within Productivity Suite, delivering vital data to advanced cloud computing platforms is easy.

 

DCS New Gladiator GCB Series Molded Case Circuit Breakers from Automation Direct 1 400

New Gladiator GCB Series Molded Case Circuit Breakers from AutomationDirect

 

AutomationDirect has added Gladiator GCB series molded case circuit breakers to their lineup of circuit protection devices. Gladiator MCCBs are designed to reliably protect circuits and equipment from thermal overloads, short circuits, and ground faults. Available in two or three-pole configurations, these high-performance circuit breakers are offered in seven frame sizes up to 1200A with a selection of trip units and up to a 100kA interrupting capacity. 

 

DCS Gems Sensors New RLI Series Non Contact Radar Level 1 400

Introducing Gems’ New RLI Series Non-Contact Radar Level Sensor

 

Available in a compact design constructed from chemically inert PVDF material, the RLI Series Non-Contact Radar Sensor features models that work in tanks up to 49.21’ (15 m) deep! Its simplified programming and setup via Bluetooth® connection make installation quick and easy. In addition, it can run diagnostics to view signal strength and tank obstructions. Learn more about Radar Technology and its benefits over other sensing technologies.

 

DCS SICK Motor Feedback System Rotary STS 1 400

Motor Feedback Systems Rotary HIPERFACE® STS from SICK

 

The trend toward highly dynamic drive systems has clearly strengthened in recent years. The STS absolute motor feedback system ensures maximum flexibility and precision when measuring the position and speed of hollow shaft motors and direct drives. The non-contact magnetic measurement principle works without causing wear. A scalable measurement system, the STS adapts to different hollow shaft diameters of the application. In addition, the STS scores points with its particularly flat design and compact dimensions, making it the ideal solution for tight installation situations. Thanks to the standardized HIPERFACE® interface, the motor feedback system can be easily integrated into nearly any industrial environment.

 

DCS Control Techniques Commander S and Marshal 1 400

Introducing Commander S and Marshal from Control Techniques

 

Control Techniques, part of the Nidec group of companies, is launching a new member to the Commander family of drives and a revolutionary app named Marshal. Commander S provides a solution for applications that require plug-and-play control convenience straight from the box. It’s easy to install, easy to use, reliable and cost effective. Commander S is allegedly the first drive to come with an app interface as a standard feature at no extra cost. Marshal revolutionizes how the user interfaces with the drive covering commissioning, monitoring, diagnostics, and support.

 

DCS AutomationDirect Bimed Cabl Entry System and Cable Glands 1 400

Bimed Cable Entry Systems and Cable Glands from AutomationDirect

 

AutomationDirect has added BPA series split-frame and BRM series solid-frame cable entry systems and cable glands from Bimed.  Cable entry systems provide safe installation into enclosures or electrical equipment, securing cables and providing strain relief while maintaining enclosure sealing requirements. The BPA series cable entry system allows cables to be installed through an enclosure or other bulkhead surface without requiring disassembly of connectors from pre-made or terminated cables and without compromising environmental protections.

 

DCS Nidec Servo Launches Motors with Can Bus 1 400

Nidec Servo Launches Motors with Can-Bus, A Communication Function for Vending Machines for The First Time in The World*

 

Nidec Servo Corporation announced recently that it has launched the world’s first* brushless DC motors equipped with Can-Bus, a communication function for vending machines’ product pay-out mechanisms. Can-Bus (Controller Area Network-Bus), a type of vehicle bus, or an internal communications network that interconnects devices inside a vehicle or a train, enables microcontrollers and devices to communicate with one another without a host computer. Though originally designed for multiplexed in-vehicle electrical wiring that is required to be noise-resistant, Can-Bus is now used widely for devices to communicate control information in such areas as robotics, which includes transportation equipment and machine tools.