DCS SEW EURODRIVE New DR Series AC Motors 1 400

New DR Series AC Motors (1 speed) from SEW-EURODRIVE

 

SEW-EURODRIVE offers you the ideal AC motor for any requirement: 2, 4, 6 and 8-pole motors, with powers of 0.09 kW to 375 kW and in the efficiency classes IE1 to IE4. Test them and the motors of the DR/DRN/DR2 series in line or inverter operation! DR/DRN/DN2 three-phase AC motors are efficient, powerful and usable worldwide. With the DR/DRN/DR2 modular motor systems, they implement millions of drive combinations and move different systems and machines, worldwide.

 

DCS Automation Direct Murrelektronik M12 Data Cables Now Available 1 400

Murrelektronik M12 Data Cables, Power Cables, and Field Wireable Connectors from AutomationDirect

 

New Murrelektronik data cables are high-flex shielded Ethernet Cat5e cables offering various connector styles, including D-coded M12 to M12, M12 to RJ45, RJ45 to RJ45, and M12 to pigtail. These cables are flame-retardant and chemical resistant with a tough TPE (thermoplastic elastomer) jacket for typical industrial applications.

 

DCS Omron Robotics Integrated Cojntroller 1 400

Robotics Integrated Controller from Omron

 

An all-in-one control platform for applications requiring high-speed processing, machine control, safety, reliability, and maintainability. The Omron Robotics Integrated Controller (IC) perfectly synchronizes automation technology so that customers can improve the speed and accuracy of their production, simulate entire production lines, simplify maintenance, and reduce time-to-market.

 

DCS Allied Electronics Offers Banners Innovative Snap Signal IIoT and New DXMR90 Controller 1 400

Allied Electronics & Automation Offers Banner Engineering’s Innovative Snap Signal IIoT Solutions, Including the New DXMR90 Industrial Controller

 

Allied Electronics & Automation now offers Banner Engineering’s Snap Signal portfolio of modular, brand agnostic, plug-and-play IIoT solutions, including the new Snap Signal DXMR90 industrial controller. Banner’s Snap Signal solutions are designed to leverage machine data from automation islands scattered throughout the factory floor, convert disparate data signals from both condition monitoring and process monitoring solutions into a unified protocol and transmit that insightful diagnostic data to a dedicated PLC or SCADA control system for local processing or an edge device used to monitor equipment conditions in the cloud. 

 

DCS Banner Expandable Safety Controller XS26 2 1 400

Expandable Safety Controller Now Available with Banner In-Series Diagnostics

 

An enhanced version of Banner’s XS26 Safety Controller is available with built-in In-Series Diagnostics (ISD). This technology simplifies installation, provides comprehensive real-time data about automation safety equipment, and prevents or reduces downtime. The expandable XS26-ISDd allows users to configure and monitor up to 394 connected safety devices—such as E-stop buttons, safety switches, safety light screens, two-hand controls, and rope-pull switches—and controls up to 68 independent safety outputs. It is a cost-effective solution to meet machine-safeguarding requirements, with the flexibility to grow with expanding production and future technology enhancements.

 

DCS PepperlFuchs R1000 Distance Sensor 1 400

Pepperl+Fuchs: R1000 Distance Sensor with Pulse Ranging Technology for Positioning Accuracy Down to a Millimeter

 

Dynamic applications such as distance measurement and positioning in storage and retrieval machines or shuttle cars require a high measuring rate. The new R1000 distance sensor with Pulse Ranging Technology (PRT) is suitable for high-precision distance measurement. For this purpose, the dimension of the light spot was designed so that the sensor can easily compensate for mechanical influences such as vibrations and shocks. Due to its compact housing, easy integration in applications with confined installation space is possible. The red transmitter light for easy alignment of the photoelectric sensor and an integrated display ensure user-friendly commissioning and diagnostics.

 

DCS Invertek IP66 NEMA4X VFD 1 400

Introducing the IP66/NEMA 4X Variable Frequency Drives from Invertek

 

Optidrive variable frequency drives provide advanced electric motor control and are renowned for their ease of set up and use. With the addition of IP66 / NEMA 4X rated enclosures, which are available across the E3, P2 and Eco ranges, they can operate in some of the harshest environments. The IP66 / NEMA 4X rated variable frequency drives can be used in applications and environments containing large amounts of dust, moisture, and chemicals. They are the perfect choice for applications such as conveyors, mixers, packaging, ventilation and fans, and water or liquid pump systems.

 

DCS Hartland Littlefuse HHS Series Motor Hard Start Capacitor 1 400

Motor Hard Start Capacitors – HHS Series from Hartland Controls/Littlefuse

 

Hartland Controls, a Littelfuse Company‎, offers easy-to-install hard start kits that improve efficiency in compressors. ‎Hard start capacitors allow A/C units and heat pump ‎compressors to start up at maximum efficiency, allowing the unit to reach a normal rated speed up to ten times faster. Hard start ‎capacitors are also ‎useful in difficult conditions, such as low voltage or undersized wiring, and reduce light dimming during ‎‎compressor start-up. The HHS series capacitors eliminate the heat surge that typically occurs at start-up and help extend the life ‎of ‎the compressor, terminals, windings, and capacitor‎.

 

DCS Littelfuse Compact Cartridge Fuses Available 1 400

Littelfuse Offers Compact Cartridge Fuses Available with High-Current, High-Voltage Ratings

 

Littelfuse, Inc., a global manufacturer of leading technologies in circuit protection, power control, and sensing, recently announced the compact cartridge fuse series available that’s rated at 500Vac/Vdc with current ratings from 40A to 63A and a 10,000A interrupting rating. The 607 Series high-current, high-voltage cartridge fuse, designed for overcurrent protection applications, provides a robust solution for demanding high-voltage power supply circuits. The 500V fuse rating is suitable for both AC and DC inputs. With a 10mm x 32mm cartridge body, a single 607 fuse requires less board space than previous designs that used multiple lower current rated fuses in parallel. As a result, designers can reduce the board space they reserve for protection components when designing high wattage equipment. 

 

DCS Harland Littlefuse AC Relay for HVAC and Industrail Switching 2 400

AC Relay for HVAC and Industrial Switching – HCR Series by Hartland Controls/Littlefuse

 

Hartland Controls’ relays provide power system on/off switching capabilities. The primary purpose of Hartland Controls/Littelfuse’s relays is to switch electrical circuits on and off in an instant. Relays are essentially electromagnetic switches activated by a low power signal or current in one circuit to open or close another circuit. They are most commonly used in power system networks and multiple automotive and industrial applications or HVAC where the system is controlled by 24 VAC, 120 VAC, or 240 VAC.

 

DCS Rittal Introduces 4 Seasons of Climate Control 1 400

Rittal introduces 4 Seasons Climate Control

 

The manufacturing world is facing increased challenges like labor shortages, material costs, transportation delays, and low stocks due to the current crisis. Adding to that is the emphasis on raising energy efficiency and lowering the carbon footprint, centering on climate solutions that simplify complex cooling needs through automation and connectivity. Rittal is addressing these challenges head-on by providing year-round complimentary consultations and audits to find optimal enclosure climate control solutions that not only lower energy costs by up to 75% but may also include extended warranties and tailored service packages.

 

DCS ABB IE5 SynRM and Drives 1 400

ABB IE5 SynRM and Drives – The Perfect Match

 

If you are looking for world-leading efficiency, ABB has a long expertise creating the perfect motor and drive combinations for businesses worldwide. By pairing their breakthrough IE5 SynRM motor with the optimal ABB drive for your needs, you can push your output further than ever – saving energy, spending less and producing more. Because variable speed drive pairings can be industry optimized, ABB motor and drive packages are ideal for everything from water and waterwaste to HVAC and food and beverage production. But any industry can benefit from the advantages that the motor-drive package offers. Giving you one point of access, one supplier, and support whenever you need it.

 

DCS SEW EURODRIVE New Screw Conveyor Drive 1 400

The New SEW-EURODRIVE Screw Conveyor Drive Is Ready to Be Put to Work!

 

SEW’s re-designed screw conveyor now boasts a 50% higher axial load capacity, labyrinth sealing technology, and design features for ease of maintenance. Using the SEW shaft removal tool, even the most stubborn shaft can be removed with little effort. Gear unit and seal maintenance is steamlined, as the sealed CEMA flange takes the screw load while the gear unit is removed, minimizing the need for trough access and screw removal. All of these features coupled with the proven and reliable SEW gearmotor, make the new SEW screw conveyor drive an ideal solution for bulk material handling applications.

 

MC AlliedElectronics HARTING Connector Series 1 400

Allied Electronics & Automation Supplies HARTING’s Award-Winning Han® 1A Miniature, Modular Rectangular Connectors

 

Allied Electronics & Automation supplies HARTING’s award-winning Han® 1A connector series, which is widely acclaimed for the space savings, time savings, and versatility granted by its miniature, modular, rectangular form factor with power, signal, and data capabilities and snap-in mating technology. Han 1A connectors require up to 30% less space than HARTING’s next smallest modular industrial connector, the Han 3A, and are made of robust, chemical-resistant plastic engineered to withstand rugged industrial and transportation environments, which also makes them lightweight and economical. This unique combination of characteristics earned the series a prestigious 2020 iF Design Award in the electrical connector product category and caters to both miniaturization and automation trends in the machinery, robotics, transportation, wind energy, and energy storage industries.

 

DCS Littelfuse ZCASE BMZB Series Fuse Holder 1a 400

ZCASE® BMZB Series – 32V Battery-Mounted Fuse Holder with Busbar from Littlefuse

 

The Battery Mount ZCASE® Fuse Holder with Busbar (BMZB) series allows you to mount fusing directly to a post-style battery terminal. This series offers a compact solution with an integrated busbar, which consolidates complex wiring around a battery system, eliminating or reducing the need for additional wiring. By creating additional fusing locations outside of the main fuse box, these products help reduce cabling and assembly time and provide localized circuit protection without modifying the existing battery harness.

 

DCS PILZ New Safe Protection Zone Monitoring 1 400

New: Safe Protection Zone Monitoring of Robotics Applications from PILZ

 

For safe protection zone monitoring of robotics applications, particularly in rugged environments, another sensor is now available for the safe radar system PSENradar: PSEN rd1.2 with the equally new analyzing unit PSEN rd1.0 I/O PS ETH, which covers Category 3 / PL d. So, in conjunction with the modular safety relay myPNOZ, you have a safe, complete solution for safeguarding robotics applications. Example applications include rear access protection in metalworking, safe woodworking thanks to protection zone monitoring, using radar sensors to safeguard outdoor applications, and more.