Festo Introduces Pre-Configured and Assembled Air Preparation Units that Meet Safe Quality Food Guidelines
| |

Festo Introduces Pre-Configured and Assembled Air Preparation Units that Meet Safe Quality Food Guidelines

July 17, 2024 Festo has introduced a line of pre-configured, assembled, and tested compressed air preparation units that not only makes specification and ordering faster and easier, but also ensures clean air in food and beverage production. Right out of the box, the new units meet the Safe Quality Food (SQF) guidelines of final filtration…

|

The XPlanar Greatly Increases Testing Capacity and Throughput

Flexible final inspection for I/O terminal production from Beckhoff May 25, 2023 In the fall of 2021, Beckhoff began to completely rethink the way it carried out final inspections of I/O components with Xplanar. Its aim was to significantly increase testing capacity and throughput, even though many different types of terminals are produced. The system,…

|

Modern General Purpose Enclosures 1556 Series- Dual Wall-Mount or Desktop

July 15, 2024 Hammond Manufacturing’s modern general purpose enclosures 1556 series are dual wall-mount or desktop. Key features include that it is ideally suited for mounting printed circuit boards, IoT equipment, and other small electronics. It can be used in a tabletop configuration using rubber feet (included) or two different wall-mount configurations using wall mount…

| |

SurgePure Industrial Surge Protection for Mission Critical Environments

July 15, 2024 SurgePure’s industrial surge protection devices are rated foremost in the industry because of their unique ‘Non-Degrading’ design. You won’t be left second-guessing if you’re protected or not with SurgePure’s premium ‘Single-Element’ surge protection systems. What is Dirty Power Costing You? Dirty power is not good for any business and usually ends up costing you thousands in…

| | | |

PFC100 Generation 2 Controllers from WAGO

July 15, 2024 WAGO’s new PFC100 Generation 2 Controllers come with increased memory, are programmed using CODSYS 3.5 software, and are protected with SSL/TLS encryption, VPN, as well as a firewall for optimum security. PFC100 Controller Diverse inputs & outputs in a compact housing! WAGO’s PFC100 Generation 2 controllers combine a fast CPU, flanked by…

| |

LOVATO Electric Presents the New GLD Switch Disconnectors Series Specific for Photovoltaic Applications

July 12, 2024 The offer of LOVATO Electric’s range of switch disconnectors is getting wider with the introduction of a new type of specific products for photovoltaic applications up to 1500VDC. The new switch disconnectors can be actuated directly or used with a door interlocked handle and feature a wide range of accessories for all installation requirements. LOVATO Electric has…

|

RS PRO Control Panel Products Improve Efficiency

July 12, 2024 RS PRO control panel products help industrial customers improve automation efficiency, overcome common challenges, and save time, money, and resources. RS, a trading brand of RS Group plc (LSE: RS1), a global provider of product and service solutions for industrial customers, offers an extensive selection of RS PRO brand control panel products…

| |

Moxa New-gen x86 Industrial Computers Recognized by Red Dot Award: Product Design 2024

July 12, 2024 Moxa Inc., a leader in industrial communications and networking, celebrated its new x86 industrial computers (IPCs) family—the BXP, DRP, and RKP Series reaching the pinnacle of design excellence with the Red Dot Winner 2024 recognition in the Industrial Design category. Designed to meet most industrial automation market needs, the rugged computers are…

| |

Moxa Unveils New-Generation x86 Industrial Computers to Top Up Data Connectivity at Industrial Edge

July 12, 2024 Moxa Inc., a leader in industrial communications and networking, officially announced the launch of a new family of x86 industrial computers (IPCs) with exceptional reliability, adaptability, and longevity to address the increasing demands of data connectivity and real-time processing of large volumes of sensor and device data at the industrial edge. The…

|

Moxa Launches High-bandwidth Ethernet Switch Portfolio to Speed Up Data-driven Transformation of Industrial Applications

July 12, 2024 Industrial digital transformation drives extensive deployment of IoT and AI-enabled technologies, requiring high-bandwidth networks offering low latency and higher data transfer speeds. Moxa announced its new MRX Series Layer 3 rackmount Ethernet switches that support 64 ports with up to 16 ports of 10GbE speed to accelerate data aggregation for industrial applications, and…

| | |

Arlington’s Furred Wall Box™ Makes Challenging Outlet Box Installations Easy

July 12, 2024 There’s NO NEED to break out concrete block… install furring strips… or foam around the box. Arlington’s UL Listed, large volume Furred Wall Box mounts to 1×2 drywall furring strips – or a concrete block wall between furring strips. Allows installers to place a box / outlet where needed. Single and two-gang…

| | | | |

Emerson SolaHD Industrial Rack Mount On-Line UPS Improves User Interface and Lead Time

July 11, 2024 Emerson has announced the new Series D update to the family of proven SolaHD industrial rack mount on-line uninterruptible power supplies (UPSs). The new SolaHD S4KD Series replaces the current S4KC Series, offering significant user interface improvements and other design upgrades to increase reliability and product availability. The S4KD is an on-line…

|

Temposonics R-Series Position Sensors: The Ultimate in Industrial Motion Control

July 11, 2024 Temposonics, a leading provider of magnetostrictive linear position technology, is proud to announce the expansion of its successful R-Series Position Sensor product family. These sensors are designed to offer the highest performance, accuracy, and reliability for industrial motion control applications. The R-Series Position Sensors now come in various versions to suit different…

| |

Enhancing Efficiency and Sustainability with Rittal’s New Blue e+ S Cooling Units

July 9, 2024 Introduction  The push towards sustainable manufacturing is driving the need for efficient enclosure cooling units, especially in industries like automotive where consistent cooling is crucial. The challenge lies in maintaining necessary cooling outputs while adhering to eco-friendly standards. The Blue e+ S Advantage Rittal’s Blue e+ line has set a benchmark in…

| | | |

The New igus® iComm Box Creates an All-in-One System for Next-Generation Condition Monitoring

July 8, 2024 igus® announces its iComm Box communication module, which enables users to integrate igus® i.Sense sensors into its superwise condition monitoring service. Using advanced algorithms, this all-in-one system collects machine data in real-time, displaying the information on an intuitive dashboard and allowing users to make informed, proactive decisions about component maintenance and service life. The iComm Box extends the…