|

How the European Union Can Avoid Natural Gas Shortages in 2023

IEA report sets out key actions to close potential gas shortages gap if Russian pipeline deliveries fall to zero, including more rapid deployments of energy efficiency and renewables January 11, 2023 The European Union faces a potential gas shortage of almost 30 billion cubic metres of natural gas in 2023 – but this gap can…

| | | | |

Endress+Hauser Customer Experience Centre Wins Rethinking The Future Award 2022

 

The Endress+Hauser Customer Experience Centre named winner of the Rethinking The Future Award 2022 in the Industrial (Built) category. Rethinking The Future is an annual architecture award program which aims to promote outstanding work in the field of architecture and design across the world. Over 1000+ registrations were received from more than 40 countries, spanning architecture, landscaping, urban design, product design, and interior design in ~50 categories.

 

 

| |

Endress+Hauser Enhances Proline Promass Q 300/500 with Intelligent 4-Tube Technology for Precise Measurement of High Flows

 

4-tube technology increases measurement accuracy for loading, unloading, and transporting hydrocarbons in the oil and gas industry, and optimizes the flowmeter line for additional applications.

 

|

Sonepar Canada Acquires Aztec Electrical Supply Inc.

 

Sonepar has announced that its wholly-owned Canadian subsidiary, Sonepar Canada, Inc. has acquired Aztec Electrical Supply Inc. (“Aztec”). With a strong presence in the province of Ontario, the acquisition of Aztec will strengthen Sonepar’s ability to grow their industrial business model across the Greater Toronto Area.

 

| | | | | |

New K7TM Heater Condition Monitor from Omron Reduces Downtime and Product Waste by Detecting Early Deterioration in Heaters

 

Manufacturers seeking to avoid downtime and work-in-progress due to heater failure in industrial ovens, kilns, and metal heat treatment applications can gain peace of mind from a new Omron solution that monitors heater condition with high accuracy on a 24/7 basis. Industry leading automation solution provider Omron Automation Americas recently launched a new heater condition monitor that supports predictive maintenance by preventing heater failure.

 

|

ABB DCS880 – A New Control Method For Thermal Process Heating Applications In Canada

 

Many of our Canadian industrial processes use large amounts of heat generated by electricity. This can be expensive, and even more so, if significant quantities of peak power are consumed. ABB’s new DCT880 is a thyristor power controller for heating applications whose integrated power optimization algorithms reduce costs by reducing peak power demands.

 

|

HPS Power Quality Lab: Putting Power Quality to the Test

 

The HPS Power Quality Lab allows customers to experience real time testing of line side HPS power quality products such as transformers, line reactors, active harmonic filters and passive harmonic filters as well as load side products such as load reactors and different types of dV/dT filters with various cable lengths. The power quality products can run at full load using either 10HP, 25HP and 100HP VFD systems and associated motor/load. 

 

| | | | | | |

A Conversation with Shane Carnegie from SEW-Eurodrive About MOVI-C

 

When it comes to power transmission and motion control, SEW-EURODRIVE needs no formal introduction. Counted among the industry leaders in drive technology, SEW-EURODRIVE makes drive-based automation its business. SEW-EURODRIVE, founded in 1931, is a global company that specializes in gear motors, frequency inverters, drive systems, industrial gears, and control software. SEW-EURODRIVE products are distinguished by their modular components and customer-centric philosophy. Their modular components can be built in a multitude of configurations, durable gear housings, offer flexible mounting capabilities, and provide advanced electronics that ensure equipment continuously operates efficiently.

 

| | | | | | |

Introduction to SEW-Eurodrive’s Innovation Lab

 

The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario reopening earlier this year, SEW Eurodrive has been excited to present their technology and automation solutions with customers, students, and the public again. Konrad Kurylo, P. Eng., was on site with other SEW Eurodrive experts to welcome an enthusiastic and engaged audience, who were eager to see what products and solutions SEW Eurodrive has to offer for Industry 4.0. 

 

| | | | | | | |

SEW-Eurodrive Dorval, Quebec Canada Investments

May 18, 2022 SEW-Eurodrive in Dorval Quebec Canada is now open. With an 88,000 square foot facility equipped with the largest inventory of parts in Canada. Their 24/7/365 unstoppable service is built right in, and their state-of-the-art paint line is now open. And do not forget, their greatest investment is their investments: shipping investment, consistency…

| |

With Endress+Hauser’s Netilion System, Entire Water Networks Can Be Monitored, Optimized 24/7 from Any Screen, Anywhere

 

Endress+Hauser’s new Netilion Water Network Insights (NWNI) provides water and wastewater operators with all the critical data from their operations, from any location, any time of day and on any screen – a control room monitor, or a laptop, tablet or smart phone. Such unrivalled transparency can generate operational improvements, even important cost savings. NWNI interfaces with all levels of a water system wherever they are, offering utilities and process water monitors tailor-made solutions from a single source. These include everything from real-time monitoring of all field devices, providing components for data recording, transferring and archiving to performing data evaluation and one-of-a-kind forecasting functions.

 

| | | | |

With Expanded ISO Accreditation, Endress+Hauser Is Now Covering Full Spectrum of Calibration Needs

Endress+Hauser Canada has been granted expanded ISO:17025 accreditation for its calibration services to now cover the entire spectrum of flow, temperature, pressure and liquid analysis instrumentation, whether performed onsite at the customer’s facility or in the Endress+Hauser laboratorie…