| | | | | |

New K7TM Heater Condition Monitor from Omron Reduces Downtime and Product Waste by Detecting Early Deterioration in Heaters

 

Manufacturers seeking to avoid downtime and work-in-progress due to heater failure in industrial ovens, kilns, and metal heat treatment applications can gain peace of mind from a new Omron solution that monitors heater condition with high accuracy on a 24/7 basis. Industry leading automation solution provider Omron Automation Americas recently launched a new heater condition monitor that supports predictive maintenance by preventing heater failure.

 

|

ABB DCS880 – A New Control Method For Thermal Process Heating Applications In Canada

 

Many of our Canadian industrial processes use large amounts of heat generated by electricity. This can be expensive, and even more so, if significant quantities of peak power are consumed. ABB’s new DCT880 is a thyristor power controller for heating applications whose integrated power optimization algorithms reduce costs by reducing peak power demands.

 

|

HPS Power Quality Lab: Putting Power Quality to the Test

 

The HPS Power Quality Lab allows customers to experience real time testing of line side HPS power quality products such as transformers, line reactors, active harmonic filters and passive harmonic filters as well as load side products such as load reactors and different types of dV/dT filters with various cable lengths. The power quality products can run at full load using either 10HP, 25HP and 100HP VFD systems and associated motor/load. 

 

| | | | | | |

A Conversation with Shane Carnegie from SEW-Eurodrive About MOVI-C

 

When it comes to power transmission and motion control, SEW-EURODRIVE needs no formal introduction. Counted among the industry leaders in drive technology, SEW-EURODRIVE makes drive-based automation its business. SEW-EURODRIVE, founded in 1931, is a global company that specializes in gear motors, frequency inverters, drive systems, industrial gears, and control software. SEW-EURODRIVE products are distinguished by their modular components and customer-centric philosophy. Their modular components can be built in a multitude of configurations, durable gear housings, offer flexible mounting capabilities, and provide advanced electronics that ensure equipment continuously operates efficiently.

 

| |

Proline Promass Q 300/500 With Smart 4-Tube Technology from Endress+Hauser

August 11, 2022 Thanks to its revolutionary 4-tube technology and an extended measuring range for pipelines up to DN 250 (10″), Proline Promass Q from Endress+Hauser opens up numerous promising applications in the oil and gas industry. Low pressure loss and outstanding measuring accuracy are just two examples of its many benefits. Watch this animations…

| | | | | | |

Introduction to SEW-Eurodrive’s Innovation Lab

 

The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario reopening earlier this year, SEW Eurodrive has been excited to present their technology and automation solutions with customers, students, and the public again. Konrad Kurylo, P. Eng., was on site with other SEW Eurodrive experts to welcome an enthusiastic and engaged audience, who were eager to see what products and solutions SEW Eurodrive has to offer for Industry 4.0. 

 

DCS Rittal Introducs Blue e S Cooling Units cUL Approved for Canada 1 400
|

Rittal Introduces Blue e+ S Cooling Units cUL Approved for Canada

 

Rittal is expanding its smart cooling unit solutions by adding the new Blue e+ S range. Their latest generation of cooling units with lower output categories of 300, 500, and 1,000 W have been designed for efficiency, ensuring a smaller footprint and lower costs – just like their “bigger brothers.” So, it’s a win-win both for users and for our future.

 

| | | | | | | |

SEW-Eurodrive Dorval, Quebec Canada Investments

May 18, 2022 SEW-Eurodrive in Dorval Quebec Canada is now open. With an 88,000 square foot facility equipped with the largest inventory of parts in Canada. Their 24/7/365 unstoppable service is built right in, and their state-of-the-art paint line is now open. And do not forget, their greatest investment is their investments: shipping investment, consistency…

DCS Teqwave H Highest Quality In Line Concentration 2 400

Teqwave H: Highest Quality In-Line Concentration Measurement For Food+Beverage Production

 

Endress+Hauser’s new in-line Teqwave H analyzer enables users to monitor fluids in the food and beverage industry reliably. A range of applications are possible, such as monitoring sugar content in fruit juices and distilled beverages or the concentration of cleaning agents. The hygienic design of Teqwave H fulfills the highest quality standards. State-of-the-art algorithms and a flexible application concept guarantee optimal process control even when changing batches

 

| |

With Endress+Hauser’s Netilion System, Entire Water Networks Can Be Monitored, Optimized 24/7 from Any Screen, Anywhere

 

Endress+Hauser’s new Netilion Water Network Insights (NWNI) provides water and wastewater operators with all the critical data from their operations, from any location, any time of day and on any screen – a control room monitor, or a laptop, tablet or smart phone. Such unrivalled transparency can generate operational improvements, even important cost savings. NWNI interfaces with all levels of a water system wherever they are, offering utilities and process water monitors tailor-made solutions from a single source. These include everything from real-time monitoring of all field devices, providing components for data recording, transferring and archiving to performing data evaluation and one-of-a-kind forecasting functions.

 

| | | | |

With Expanded ISO Accreditation, Endress+Hauser Is Now Covering Full Spectrum of Calibration Needs

Endress+Hauser Canada has been granted expanded ISO:17025 accreditation for its calibration services to now cover the entire spectrum of flow, temperature, pressure and liquid analysis instrumentation, whether performed onsite at the customer’s facility or in the Endress+Hauser laboratorie…

 

 

 

 

| |

Weidmüller Canada Unveils Enhanced Operations at its Canadian Headquarters

On September 17, 2019 Weidmüller Canada held a re-opening ceremony at its Canadian facility in Markham, Ontario. The location is home to Weidmüller Canada’s administrative staff, customer service representatives, technical support group, inside sales and a complete product warehouse and distribution centre for Canada. Weidmüller was initially founded in 1975 in Germany and has been in operation in Canada since 1986.