Phoenix Contact: Hybrid Device Connectors With Knurled Nut

September 14, 2020

M23 Hybrid series device connectors from Phoenix Contact are now also available with a knurled nut. This enables devices such as servo drives to be connected using either coupler or cable connectors.

Inputs and outputs can therefore be clearly distinguished – both visually and mechanically. This increases cabling safety, especially in daisy chain applications.

The hybrid connectors with pin or socket contacts enable the transmission of signals, data, and power in a single connector. A CAT5 data interface or four additional signal contacts are available for this. The device connectors are suitable for currents up to 30 A and voltages up to 630 V AC/850 V DC.

Source

Related Articles

| | | |

Power Supply Options for Your Industries

August 12, 2024 The dependability and functionality of electronic devices and systems are greatly dependent on power sources in today’s technologically advanced society. Power supply guarantees that electronic equipment, ranging from industrial machinery on factory floors to smartphones in our pockets, receives the precise, consistent, and secure power required for optimal operation. Power supply knowledge…

PCB Terminal Blocks and PCB Connectors of the COMBICON Series for the Ideal Device Connection

November 30, 2022   {youtube}o5Bvs-wpINw{/youtube}    PCB terminal blocks, PCB connectors and high-current feed-through terminal blocks from Phoenix Contact make the ideal device connection technology possible for numerous applications. The comprehensive portfolio offers device manufacturers a high degree of freedom in planning and implementing their application.  

Proax Technologies Ltd. – WeAutomate

Proax Technologies Ltd. Is pleased to announce the launch of its new slogan; WeAutomate. After extensive deliberation, this decision was made to reflect the changing nature of the automation and distribution industry and to better serve clients in the following technical sectors: Industrial Controls, Motion Control, Machine Safety, Pneumatics, Mechanical Solutions and Automation & Robotics….

| | | |

EtherNet/IP Adds Process Device Profile Support for Enhanced Process Variable and Diagnostic Standardization

April 18, 2023 ODVA has announced that process device profiles have been added to The EtherNet/IPTM Specification to provide automation practitioners with another critical tool to help optimize plant operations. Process device profiles provide a standard format for process variables and diagnostics across an array of devices for smoother vendor interoperability and easier DCS and PLC data integration…

| |

Quick and Easy Cable Stripping with HELUTOOL HAM 29

August 2, 2023 With the HELUTOOL HAM 29, HELUKABEL introduces an innovative outer jacket cutter to its portfolio. HELUKABEL expands its accessory portfolio with the HELUTOOL HAM 29, an innovative outer jacket cutter. This universally applicable tool is designed for cable diameters ranging from 4.5 to 29 millimeters. The blade, made of hardened steel, is…

| |

LOVATO Electric Presents the New GLD Switch Disconnectors Series Specific for Photovoltaic Applications

July 12, 2024 The offer of LOVATO Electric’s range of switch disconnectors is getting wider with the introduction of a new type of specific products for photovoltaic applications up to 1500VDC. The new switch disconnectors can be actuated directly or used with a door interlocked handle and feature a wide range of accessories for all installation requirements. LOVATO Electric has…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…