| |

WAGO’s New IO-Link Converter

June 18, 2024

WAGO's New IO-Link Converter

WAGO’s new IO-Link Converter is a 4-20 mA analog input with a digital display incorporating analog signals into a digital communication network for sensors and actuators from the field into an IO-Link-capable system.

Application:

Decentralized display, preprocessing and conversion of analog signals

Use as an IO-Link device:

The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation.

The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation.

Use as a stand-alone device without IO-Link:

The device compares the measured current value with the set parameters and switches the output according to the selected function.

This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.

More Information

WAGO’s new IO-Link Converter

Related Story

SMD PCB Terminal Blocks from WAGO

Reduced to the essentials, WAGO’s new 2065 Series SMD PCB Terminal Block provides the industry’s greatest termination capability in an ultra-compact footprint. Just 2.7 mm (1.063 inch) tall, the compact 2065 Series accommodates conductors from 24 to 18 AWG (0.2 … 0.75 mm², solid and fine-stranded).

Related Articles

|

New Options Added To Hammond Power Solutions’ HPS Centurion P And HPS Sentinel Lines

Capacitor Contactor Option Available For HPS Centurion P Passive Harmonic Filter January 25, 2023 The HPS Centurion™ P passive harmonic filter already employs a low kVAR to HP ratio in its mitigation of harmonics to meet IEEE 519 guidelines. The new capacitor contactor option for the HPS Centurion™ P passive harmonic filter allows users to…

DCS Maintenance Safeguarding Key in Pocket System Protecting against Machine Restart 1 400x275

Maintenance Safeguarding “Key-In-Pocket” System, Protecting Against an Unauthorised Machine Restart

 

Use the “key in pocket” maintenance safeguarding system to protect your staff from the hazards of an unplanned restart of plant and machinery in maintenance situations. This solution guarantees that hazardous plants cannot be put back into operation while there are people in the danger zone.

 

|

More WEG CFW500 High-Performance and Washdown Duty AC Drives from AutomationDirect

January 20, 2023 AutomationDirect has extended its line of WEG CFW500 high-performance AC drives to include more horsepower options. With this addition, the high-performance horsepower ratings have been expanded all the way up to 150hp. Also added are new higher current high-performance 10hp drives as well as 10hp washdown rated IP66/NEMA 4X models. A full…

|

Siemens’ Software to Manage Network Model Data Increases Operational Efficiency

March 4, 2024 Siemens has announced the launch of new Gridscale X software with the release of a Gridscale X Network Model Manager in the US and Canada. The product allows ISOs (independent system operators) and TSOs (transmission system operators) to centrally manage their network data with a Digital Twin of the power grid for…

| | |

Siemens and Nexii Announce VersiCharge XL Available for Commercial Market Deployment

August 18, 2023 Meant for high-volume charging areas like airports or hospitals, VersiCharge XL can be quickly installed, is easily scalable for fleets, and reduces environmental impact by using low-carbon components and modular installation. Siemens has announced commercial availability of the VersiCharge XL, a sustainable electric vehicle (EV) charging structure designed for electrifying fleets at…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…