|

New from Arlington: Larger Snap2It Push-On Connectors

April 22, 2024

New Sizes in Straight and 901-1/4″ – 1-1/2″ – 2″

New from Arlington: Larger Snap2It Push-On Connectors

Save time and money with Arlington SNAP2IT fittings. They offer the fastest, easiest installation on liquid tight conduit. To install these connectors, simply push onto the conduit. You’ll get a secure, liquid tight seal, with no tools needed. They ship fully assembled, no disassembly required! Plus, they’re removable and reusable too.

For use with non-metallic liquid tight conduit, type B only. Push on installation. Produced from UV rated plastic for long outdoor life. Arlington’s SNAP2IT, non-metallic connectors are competitively priced and provide a fast and easy installation.

Features

  • Competitively priced
  • Fast and easy installation
  • Provides a super-secure, liquid-tight seal
  • Save 17 seconds per connector vs. 57 seconds for multie-piece connectors at same cost

Push-On Installation

To install these connectors, simply PUSH ON to conduit. That is it!

You will get a super-secure, liquid-tight seal. Plus, they ship fully assembled – with no disassembly required.

Competitively priced, they are removable and reusable too.

Source

More Information

Download the Specification Sheet

View Online Catalog

Related Story

Arlington Wins! … IMARK Supplier of the Year for 2022

Arlington Industries Inc. announced recently that the company was recognized by IMARK Electrical, once again, as the Supplier of the Year for 2022 at the IMARK GROUP’s annual meeting in Indian Wells, CA on October 17, 2022. Arlington won this prestigious award in the “AA” category of mid-sized manufacturers for outstanding service to IMARK members.

Related Articles

DCS NORD IE5 Synchronous Motors 1 400

IE5+ Synchronous Motors from NORD – Efficient. Hygienic. Compact.

 

The new generation of NORD® IE5+ synchronous motors is manufactured in-house for use in intralogistics as well as in the food and beverage industry. Our motors feature a compact and hygienic design in a very small space and thus ensure high corrosion resistance and easy cleaning. The permanent magnet synchronous motor (PMSM) is optionally available as an nsd tupH™ or IP69K version.

 

|

Software PNOZmulti Configurator – What’s New in Version 11.3

The original safety circuit configuration tool for the small controllers PNOZmulti December 20, 2023 Laser scanner function blocks for PSENscan, motion monitoring for AGVS From software version 11.3.0, new blocks provide for the most secure und flexible monitoring of the: Laser scanner PSENscan: The zone selection function block enables productive solutions for stationary and mobile…

| |

ANCA Marks Milestone Anniversary at IMTS with Debut of Next-Generation Technologies

September 27, 2024 ANCA’s legacy of innovation is shaping the future of technology for lower cost, higher quality cutting tool production ANCA at IMTS not only celebrated five decades of innovation but 35 years of successful operations in the USA and exhibiting the first machine ever bought in the U.S., a refurbished TG4, was a…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Everything You Need to Know About Grippers from Festo 

    December 17, 2024 By Krystie Johnston, Cory Knight, and Ryan Kroger Selecting the right gripper for an automated handling task can be challenging – but with Festo, it can be easier than ever to overcome these challenges. Grippers are essential components of industrial robots and handling systems because they are the connection between the handling… Read More…

  • FANUC Scholarship Supports Industry, Educators, and Students 

    December 11, 2024 By Krystie Johnston FANUC’s $1 Million Scholarship fund will provide $50K annually to students across the United States and Canada pursuing careers in manufacturing and automation. FANUC has always believed in the power of education and its importance in shaping the future. As leaders in education, their Certified Education program connects industries,… Read More…