|

KS98-2 Multi-Function Controller: Hot Water & Steam Boiler Control System from Gems Sensors & Controls

Gems KS98-2 Multi-Function Controller

K@98-2 multi-function controller
Gems KS98-2 multi-function controller combines PID control, process monitoring, sequence control, data logging and alarm monitoring functions in a compact programmable unit

The selection process for incorporating electronic controls into a boiler system can be daunting and can vary depending on the application. For the simplest of applications, a basic safety relay may be all that is needed. For more complex applications, feature rich controllers that can assist the end user in troubleshooting the heating system are a necessity. No matter what your application, specifying and designing in a controller that meets local and federal regulations is a must.

Application

Industrial and commercial boilers are expected to operate uninterrupted at peak efficiency. Anything less can result in serious waste, and ultimately, money lost. Configuring intricate boiler controls with many control loops to fit ever-changing heat requirements can be challenging without the right modern controller. Sophisticated, accurate, and repeatable boiler control provides an effective solution to reduce waste, improve efficiency, increase safety, and lower cost.

Application Challenge:

Industrial and commercial boilers are expected to operate uninterrupted at peak efficiency. Anything less can result in serious waste, and ultimately, money lost. Configuring intricate boiler controls with many control loops to fit ever-changing heat requirements can be challenging without the right modern controller. Sophisticated, accurate, and repeatable boiler control provides an effective solution to reduce waste, improve efficiency, increase safety, and lower cost.

Application Solution:

Gems KS98-2 multi-function controller – The KS98-2 combines PID control, process monitoring, sequence control, data logging and alarm monitoring functions in a compact programmable unit. It can act as a dedicated DDC (direct digital controller) for a single boiler or can include many devices in a primary/secondary configured DCS (distributed control system) for multiple boiler control. With fully modular internal I/O, optional remote I/O, and up to 30 control loops, the Gems KS98-2 can be tailored to monitor and control the many process control loops required in a sophisticated boiler system. The comprehensive function block programming library supports many features for customizable user interface and complete process control.

Supported control and monitoring functions for Gems KS98-2 multi-function controller include:

  • Pressure control loops may be used for the control of boiler pressure or fuel oil pressure.
  • Temperature control loops may be used for the control of steam or water temperature from boilers or fuel oil temperature from fuel oil heaters.
  • Liquid level control loops may be used for the control of boiler tank water level. Supports one, two, or three element feed water control.
  • Flow control loops may be used for the control of fuel flow into the boiler burners, burner draft airflow, feed water into a boiler, or steam flow out of a boiler.
  • Fully metered Combustion controls to automatically provide the proper fuel to air ratio over the entire boiler operating range.
With fully modular internal I/O, optional remote I/O, and up to 30 control loops, the Gems KS98-2 can be tailored to monitor and control the many process control loops required in a sophisticated boiler system

Features and benefits optimized for boiler control:

Recorder with data-logging/event loggingTrend curves
Programmed safety interlocksSequence control
Alarm indicationCascade control
Totalizer/math functionsPrecise ratio control
Customizable touch screen HMIManual control with password protection
Access level lockoutsOptional password protection
Bar graphsValve motor driver

Communication and interface options provide adaptability for integration into your existing system and flexibility to establish new configurations based on customer needs.

Easy to maintain

  • Via front accessible USB
  • Via network access
  • Using a USB pen

Communication and interface options available:

  • EtherCAT
  • Ethernet/IP
  • IO-Link
  • Modbus
  • VARAN
  • Sercos
  • EtherNET
  • PROFIBUS
  • CANopen
  • DewviceNET
  • CC-Link
  • PowerLINK
  • ASi
  • PROFINET
  • SmartWire-01

See Gems Other Boiler Control Products!

  • Warrick Controls Conductivity Relay Controls
  • ULS-100 Capacitive Point Level Sensor
  • XM/XT-700 Stainless Steel Continuous Level Transmitter
  • FS380/480 Stainless Steel Flow Switches
  • PS61 Subminiature Pressure Switch with EPDM Seal
  • 3500 316L Stainless Steel Pressure Transducer
  • CAL MVR, or PMA STB55 FM Approved Limit Devices (e.g., stack temp limit)

Learn more about the KS98-2 multi-function controller from Gems Sensors & Controls

Related News

Proax Technologies Ltd. Now Authorized Distributor of Gems Sensors

Proax Technologies Ltd. is pleased to announce they are now an authorized distributor of Gems Sensors & Controls, a global supplier of sensing and control solutions. This addition aligns with their current offerings and will be available to all our clients throughout Canada, coast to coast.

Related Articles



Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More



Latest Articles

  • Advanced Barcode Technology for Traceability 4.0 and Supply Chain Precision

    October 30, 2024 Omron is a market leader in barcode verification and compliance solutions. In an era where efficiency and accuracy are paramount, the latest advancements in barcode technology are setting new standards for seamless traceability. With enhanced imaging capabilities and adaptive lighting, these innovative solutions are designed to tackle the most challenging conditions in… Read More…

  • Rethink Robotics Rises from the Ashes, Better, Faster, Stronger

    October 28, 2024 By Krystie Johnston Rethink Robotics is making a powerful comeback. They recently relaunched, rebranded, and revealed a new lineup of products at IMTS 2024. Their Rethink Reacher cobots have been designed for precision and performance, their Rethink Ryder autonomous mobile robots (AMRs) offer effortless efficiency, and their Rethink Riser elevates operations by… Read More…