DURApulse GS10 Micro AC Drives from AutomationDirect

DCS DURApulse GS10 Micro AC Drives from Automation Direct 1 400

July 5, 2022

 

AutomationDirect has added the DURApulse GS10 series as their newest and most affordable line of micro AC drives. GS10 drives are available in a variety of voltage and horsepower ratings, including single-phase 120VAC models in sizes from ¼ to 1 hp, single-phase 230VAC models from ¼ to 3hp, three-phase 230VAC models from ¼ to 7.5 hp, and 460VAC three-phase units from ½ to 10 hp.

Even with the low price, these drives offer advanced features such as sensorless vector control, PID control, multiple motor support for induction motors, as well as the ability to control permanent magnet motors. Modbus RTU communication and generous built-in I/O, including analog, digital (with one 10kHz pulse train input), and relay, are standard.

NEMA 1 conduit boxes, DIN rail mounting kits, braking resistors, and more are offered as optional accessories.

The new DURApulse GS10 micro AC drives start at $112.00 and come with a two-year warranty.

DCS DURApulse GS10 Micro AC Drives from Automation Direct 2 400

To learn more, visit AutomationDirect by clicking here

 

 

 

Related Articles

Festo’s DLGF Flat Design Rodless Drive Fits Tight Spaces and Budgets

Festo’s DLGF Flat Design Rodless Drive Fits Tight Spaces and Budgets

Festo designed the new space-saving, flat, DLGF rodless linear drive as a very economical choice for applications where installation space is especially tight, like in electronics, small parts assembly, packaging and handling technology. Since those space considerations can also make a pneumatic drive harder to adjust or service, Festo also made its proprietary self-adjusting end-cushioning (PPS) standard with DLGF. Self-adjusting cushioning saves time and makes processes more reliable; the drive is always providing the correct cushioning.

 

 

 

| |

Compact NOA Edge Device Comprising Embedded PC, HART I/O Terminals, and OPC UA Server

October 12, 2023 PC-based control for the implementation of NAMUR Open Architecture (NOA) at Bayer Process analytical technology (PAT) plays a crucial role in the chemical industry. Bayer AG, for example, is enhancing efficiency and transitioning from time-based to condition-based maintenance by embracing the cutting-edge NOA concept. This is implemented through the seamless integration of…

| |

Murrplastik Two-Piece Flex Split Conduit from AutomationDirect

October 31, 2023 AutomationDirect has added EWT-PA series flexible, non-metallic, two-piece split conduit from Murrplastik.  This flex split conduit provides an easy solution for routing pre-terminated cables, eliminating the need to dismantle/reassemble the installed connectors. The EWT-PA series conduit consists of dual overlapping tubes that are easy to open yet provide mechanical protection and eliminate…

WEG Fully Digital Soft Starters and Micro VFD Drives from AutomationDirect

WEG Fully Digital Soft Starters and Micro VFD Drives from AutomationDirect

New compact soft starters and micro VFD drives have been added to the AutomationDirect motor controls lineup which encompasses simple manual controllers, motor contactors and starters, drives and soft starters. WEG SSW05 and SSW07 soft starters are compact, fully digital soft starters with state-of-the-art DSP (Digital Signal Processor) controller designed to provide great performance on motor starts and stops.

 

 

 

|

NWC Series Swing-Out Sectional Wall Mount Rack Cabinet from Hammond Manufacturing

IP54 Rated | 350 lbs (158 kg) Load Capacity. Seismic rated up to 200 lbs (90.72 kg). November 14, 2023 Hammond Manufacturing’s swing-out sectional wall mount rack cabinet NWC Series features dual access to equipment via the double hinge design. The main body can be installed to swing from left-to-right or right-to-left. They are available…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…