Simple Connection of Analog Sensors and Actuators in IO-Link Networks

DCS PepperlFusch New IO Link Analog Converter 1 400

January 11, 2022

DCS PepperlFusch 1 200

New IO-Link Analog Converters Enable Fast and Flexible Integration of Devices with Analog Interface to an IO-Link Master. More and more users are converting their plants to digital communication solutions such as IO-Link. In addition to a variety of other benefits, these provide detailed parameter, diagnostic and identification data. In standard machine and plant engineering, however, sensors and actuators with analog interfaces are still frequently used—even though their connection is complicated and expensive because shielded cables are required. Some of these sensors and actuators cannot simply be replaced by digital solutions when converting to IO-Link due to limited availability. Therefore, analog devices previously had to be connected to a control system via other communication solutions or parallel wiring, which took a lot of time and caused additional costs.

Due to the new IO-Link analog converters, sensors and actuators with analog interfaces can now be quickly and easily connected to an IO-Link master. This then passes on the data from the digital IO-Link devices and the analog sensors and actuators to a control system in bundled form, saving users time and money.

Flexible Integration Directly into IO-Link Networks

The IO-Link analog converters are installed between the IO-Link master and the analog device via M12 connectors. Due to the space-saving housing design, they can be mounted even in the smallest installation spaces.

While the converters of the ICA-AI-* series enable the connection of analog sensors, the devices of the ICA-AO-* series can control analog actuators via IO-Link. Both variants can be configured for current signals (0 … 20 mA / 4 … 20 mA) as well as voltage signals (-10 … 10 V / 0 … 10 V), so that a wide variety of devices with analog interfaces can be flexibly integrated. IO-Link enables the configuration of value ranges for the analog signals. Exceeding or falling below these values results in a corresponding diagnosis.

DCS PepperlFusch New IO Link Analog Converter 2 400

Highlights of the IO-Link Analog Converters

  • Simple connection of sensors and actuators with analog interface to IO-Link
  • Uncomplicated installation via M12 connectors
  • Small housing enables installation in the tightest installation spaces
  • IO-Link interface for providing parameter, diagnostic and identification data
  • Configurable for current signals (0 … 20 mA / 4 … 20 mA) and voltage signals (-10 … 10 V / 0 … 10 V)
  • Degree of protection IP67

 

Learn more about the New IO-Link Analog Converters here 

 

Related Articles

|

SIRIUS Motor Starter Packages

SIRIUS Motor Starters for industrial and construction applications March 6, 2023 Siemens has developed an innovative enclosed line of motor starters using their SIRIUS product family, placing the most advanced motor control technology “in a box.” To compliment their long standing “V” series made-to-order SIRIUS Motor Starters, the 3RE41 line offers a modular approach to ordering…

MC Emerson Introduces First Pneumatic Valve System with Integrated OPCUA 1 400

Emerson Introduces First Pneumatic Valve System with Integrated Open Platform Communications Unified Architecture

 

Recently, Emerson announced that its AVENTICS™ Series Advanced Valve (AV) valve system with Advanced Electronic System (AES) Profinet and Ethernet/IP is now available with preinstalled Open Platform Communications Unified Architecture (OPC UA) functionality, allegedly making it the first and only valve system to offer this directly integrated capability. The AES helps users solve interoperability challenges and access data more easily while the integration of the digital twin can improve productivity and efficiency.

 

|

New Festo CMMT MP Multi-Protocol Servo Drives Provide OEMs with Productivity, Cost Advantages

September 6, 2023 New Festo CMMT MP Multi-Protocol Servo Drives Festo introduces the CMMT MP multi-protocol servo drive. Every drive in this family is configurable for EtherNet/IP, EtherCAT, PROFINET and Modbus TCP. With CMMT MP, machine builders supporting multiple communications protocols can reduce their own servo-drive inventories. A unified drive family improves engineering productivity through familiarity…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • For Systems Integrators: Embracing Vendor-Agnostic Network Technologies

    September 3, 2024 All-in-one platforms can add flexibility to a system integrator’s offerings The COVID-19 pandemic presented system integrators with a unique opportunity to evaluate manufacturer performance during a global disruption. Throughout this period, there have been numerous instances where end users have successfully utilized their diversified supply chains to enhance production by integrating more… Read More…

  • Understanding ABB Circuit Breakers

    September 3, 2024 A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by excess current. It functions as a switch that automatically interrupts the flow of electricity when it detects a fault, such as an overload or a short circuit, thereby preventing damage to the circuit, appliances, or electrical… Read More…