Greenheck Three-Phase Vari-Green Motors

GreenheckThreePhase

October 14, 2020

Greenheck has added three-phase motors to its line of energy efficient Vari-Green electronically commutated (EC) motors. The new three-phase motors accept 208-230V and 460V power supply and are available in sizes ranging from 1 to 10 hp. Typical turndown is factory-set at 75% and speed can be controlled via an onboard dial or a 0-10 VDC control signal. Low maintenance Vari-Green motors run quieter and cooler and offer higher efficiencies compared to standard motors; the three-phase Vari-Green motor operates at IE5 efficiency levels. The three-phase motor is compatible with all Vari-Green controls and other controls such as a building automation system and has an auxiliary contact for motor status or damper actuation. The three-phase Vari-Green motor can be ordered with select sizes of Greenheck models SQ inline fans, AER axial fans and models G and CUE power roof ventilators.

Features:

  •    –   Accept 208-230V and 460V power supply
  •    –   Available in sizes ranging from 1 to 10 hp
  •    –   Typical turndown is factory-set at 75%
  •    –   Speed can be controlled via an onboard dial or a 0-10 VDC control signal
  •    –   Available with select sizes of Greenheck models SQ inline fans, AER axial fans and G and CUE power roof ventilators

Source

Related Articles

| | | |

Future-Proof Solutions for the Beverage Industry | SEW-EURODRIVE

April 3, 2024 Drive solutions for the beverage industry The beverage industry places very specific and high demands on its machines, systems, and equipment. Robust, high-torque, long-lived drive technology forms the basis for efficient system planning. Watch this video to find out what modern filling systems require and what added value SEW-EURODRIVE’s products and solutions…

| | |

Aerospace Sector, Nidec and Embraer Receive Approval for Joint Venture to Develop Electric Propulsion System

October 17, 2023 Japan’s Nidec Corporation and Brazil’s Embraer welcome the unconditional approval from all necessary regulatory authorities for the establishment of their joint venture, Nidec Aerospace LLC. The transaction combines the complementary synergies and distinct areas of expertise of two world-class engineering conglomerates to develop Electric Propulsion Systems (EPS) for the aerospace sector. Vincent…

| | | | | | |

The New Commander C300 PM – Your Gateway to Higher Efficiency

April 3, 2024 Pumps and HVAC are two industrial areas where the Commander C300 PM excels Control Techniques announces an extension to its highly flexible general purpose Commander range – the Commander C300 PM. This new variant is designed to build upon the inherent high efficiency of sensorless permanent magnet (PM) motors, reducing running costs…

| | |

NEMA 1 ≠ UL Type 1, UL Type 1 = NEMA 1, A Short Prospectus

July 3, 2023 By Nikunj Shah, Siemens Industry, Inc., Digital Factory, Motion Control Business In this paper, the author examines the various characteristics of electric drive enclosures labeled NEMA 1 and UL Type 1, detailing the differences and similarities, with an explanation of why the NEMA enclosure rating does not equate to the apparently similar…

| | | |

The New Production Plant in San Donà di Piave is Officially in Operation

May 10, 2023 The plant consists of a production area and office area that covers 6,000 of the total 12,000 square meters. The entire completely sustainable and automated building was developed with an investment of approximately 18 million euros and reinforces the intention for SHI (Sumitomo Heavy Industries) to root Lafert even further into the…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Schneider Electric Delivers Energy Management Products and Solutions in Canada

    September 13, 2024 By Krystie Johnston Canada is undergoing an energy transition to become more sustainable, reduce emissions, and reach net zero targets. Wiser Energy from Schneider Electric is an integral Energy Management System that monitors devices and energy usage in real-time, helping you use electrical energy more wisely in your building. Buildings are the… Read More…

  • Renewable Energy, Optimally Utilized

    September 13, 2024 With the expansion of new and renewable energy, sufficient production is not the only challenge. This energy also needs to be stored. Users will, naturally, want to use the electricity created from solar, wind, or hydropower, even when the specific sources aren’t exactly accessible. Battery storage systems offer a solution for this… Read More…