Fluke: ThermoView TV40 Thermal Imager

December 16, 2019

ThermoView TV40 is a high performance industrial infrared camera designed by the brand you trust, backed by 150 years of industrial application experience. Designed for the most challenging environmental conditions and supported by an intuitive and powerful analysis software, ThermoView TV40 provides the performance and personalization to meet the needs of process monitoring and control. If the need is for laboratory analysis and research that allows MATLAB and LabVIEW software plug-ins, consider the Fluke RSE300 and RSE600 Infrared Cameras; click to compare solutions.

This system, consisting of ThermoView software and TV40 thermal imager, provides fully integrated thermal imaging solution for thermal profiling, temperature control, monitoring and archiving capabilities to ensure process traceability and product quality.

The standard ThermoView TV40 thermal imager is offered with an “on-board” lens, which means that there are no external moving parts. This infrared camera is housed in an IP67 enclosure using industrial sealed connectors. The GigE interface allows for high-speed data transfer at 60 frames per second and Power over Ethernet (PoE) option. ThermoView TV40 thermal imager offers two sighting options — simultaneous thermal and visible sighting for easy alignment.

Included with this thermal imaging camera is the ThermoView software, which interfaces to process control equipment receiving synchronization inputs and providing pass/fail logic outputs, performing product inspections, and process temperature monitoring, alarming and archiving. Several temperature analysis and tools are available to provide trending and product troubleshooting, I/O alarming for over and under heating conditions.

This system can be used in applications where multiple infrared cameras need to be displayed and stitched together.

ThermoView Software

ThermoView Software offers a wide variety of analysis and process monitoring tools in a single package for thermal profiling. Its features include continuous or intermittent inspection of temperature events, independent emissivity for each Area of Interest (AOI), user configurable setup up of temperature conditions to trigger events or alarms, which can interface to discrete I/O.

In addition, it provides following analysis:

  • –   Histograms & isotherms
  • –   Multiple file export capabilities
  • –   Area and point trend data collection and display
  • –   Trend data recording of AOI’s
  • –   Simultaneous view of off-line images while system continues to operate in automation mode

ThermoView Lite Software

ThermoView lite software package provides a user with a startup software package to get familiar with the features and benefits of using the ThermoView TV40 thermal imager. Benefits of this software version include:

  • –   Display thermal images from your ThermoView TV40 thermal imager
  • –   Load Off-line images/sequences
  • –   Copy images to clipboard

Accessories

The ThermoView TV40 thermal imagers are shipped with manual, calibration certification, quick reference guide and safety sheet.

Source

Related Articles

|

Powerdrive MD Smart: the Connected Variable Speed Drive Solution for High Power Process Applications

August 21, 2023 Thanks to a strong experience resulting from close partnerships with end-users and OEMs, Nidec Leroy-Somer is offering Powerdrive MD Smart, an all-inclusive ready-to-use drive in line with the expectations of the major players in the process market segment. Compact and robust, this 100%-connected new generation drive includes all equipment needed for protecting, controlling,…

| |

Rethink Robotics Ushers in a New Era of Automation

September 3, 2024 Rethink Robotics relaunches, rebrands, and unveils a new range of flagship products at IMTS 2024 — In celebration of its longtime role as an innovator and a partner in enhancing productivity and workplace safety, Rethink Robotics returns to IMTS with a major company relaunch and rebranding. With a fresh identity and renewed…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…