Weg: Explosion Proof Motors – NEMA Premium Efficiency

November 29, 2019

WEG Explosion Proof motors are suitable for applications requiring UL or CSA certification for hazardous locations. Thermally protected with thermostats, all motors manufactured are submitted to hydrostatic as well as other routine testing at the factory to ensure compliance to the required specifications. WEG NEMA Premium Efficiency Explosion Proof motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency.

Standard Features

  • – Efficiency Certification number EEV 78282 according to National Resources Canada (NRCan) – CSA C390
  • – Efficiency Certification number CC029A according to US Department of Energy Regulations
  • – Three-phase, 2, 4, 6 & 8 pole, 60 & 50 Hz
  • – Voltage: 230/460, 460 or 575V
  • – Totally Enclosed Fan Cooled – (IP55)
  • – Squirrel cage rotor / Aluminum die cast
  • – Class ‘F’ insulation
  • – 104°F (40ºC) ambient temperature
  • – Temperature rise: Class ‘B’ (80ºC)
  • – Altitude: 3300 ft (1000 m)
  • – NEMA ratings design ‘B’
  • – 1045 heat treated and stress relieved carbon steel shaft up to 365T. 4140 for frame 404T and up
  • – Continuous Duty (S1)
  • – NEMA dimensions
  • – Non-sparking fan
  • – Service factor: 1.15
  • – Stainless steel nameplate
  • – Thermostats
  • – F1 mount
  • – NPT threaded terminal box conduit hole
  • – Color: RAL 5009 – (Blue)
  • – WEG paint plan 201A
  • – Regreasable bearings, positive pressure lubrication system (frames 364T and up)

Optional Features

  • – C and D flanges available for all frames
  • – F2 mount
  • – Special Voltages and frequency
  • – Stainless steel shaft
  • – IP56
  • – Washdown Duty

Temp Code T4

  • – CSA / UL: Class I – Division 1 – Groups C and D
  • – CSA: Class II – Division 1 – Groups F and G
  • – CSA: Class I, Zone 1, IIB

Inverter Duty

  • – Inverter Duty Certified for 20:1 CT & 1000:1 VT *
  • – Inverter Duty Certified for 1000:1 CT with a WEG VFD running in Optimized Flux mode
  • – Inverter Duty CSA certified for Division 1, Class I, Groups C & D and Division 1, Class II, Groups F & G

* 449T and 586/7T frame sizes not included. Other speed ranges available. Call for specific ratings 

Applications

  • – Petroleum and gasoline
  • – Flour / feed mills
  • – Grain elevators
  • – Fans
  • – Pumps
  • – Blowers
  • – Material handling equipment
  • – Other applications requiring motors UL or CSA listed for hazardous locations

Source

Related Articles

| | |

New Leuze Ultrasonic Sensors – Easy and Flexible Use

March 8, 2024 Thanks to an adjustable sound cone and small dead zone, the new Leuze ultrasonic sensors of the 420B and 412B series can be used for many different applications. If you’re a system operator looking to reduce the number of different sensors used in your systems, the 420B and 412B series from Leuze…

|

Feintool and SITEC Strengthen Cooperation in Europe

March 20, 2023 After a successful cooperation start in Asia, both technology companies have signed a Memorandum of Understanding to intensify cooperation in the production of metallic bipolar plates for fuel cells and electrolysers in Europe. The market for fuel cell and electrolyser applications in Europe is developing very dynamically and offers high potential. In…

Emerson’s New Hybrid Laser Process Gas Analyzer Reduces Costs for Continuous Emissions Monitoring

Emerson’s New Hybrid Laser Process Gas Analyzer Reduces Costs for Continuous Emissions Monitoring

In the midst of increasing compliance demands for emissions monitoring and nitrogen oxide (NOx) measurement in industrial applications, companies now have the opportunity to move beyond costly consumables and complex gas sample treatment associated with aging, legacy measurement systems.

 

 

 

DCS With Breakthrough 4 Tube Technology and Larger Sizes Endress Hauser Promass Q Finds New Roles in Oil and Gas 1 400x275

With Breakthrough 4-Tube Technology and Larger Sizes, Endress+Hauser’s Promass Q Finds New Roles in Oil and Gas Measurement

 

Promass Q 300/500, the high-tech Coriolis flowmeter series from Endress+Hauser for demanding fluids, now boasts revolutionary 4-tube technology, opening up numerous additional applications in the oil and gas industry in particular – for example, as a highly accurate duty meter for custody transfer and fiscal metering, or as a precision reference device (master meter) for on-site verification measurements. Furthermore, Promass Q now is available for three larger pipe sizes: DN 150 (6”), DN 200 (8”) and DN 250 (10″).

 

DCS Rittal ePocket the Digital Twin Plan Pocket 1 400

Rittal ePocket: The Digital Wiring Plan Pocket for Smooth Operation

 

The manufacturing world is familiar with thick paper folders containing equipment and system documentation inside the enclosure. From Eplan and Rittal’s point of view, such practices are no longer up to date when the data can be used digitally and centrally. The sister companies present Rittal ePocket – the digital wiring plan pocket. In terms of environmental friendliness, the new space in the cloud has the benefit of doing away with paper. In addition, operators, planners, switchgear manufacturers and maintenance staff will find it easier to work together because of the constant availability of up-to-data data.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    November 19, 2024 Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. Let’s explore the various types of relay contacts and their applications in industrial automation. Basic Contact Types and Their Applications The foundation of… Read More…

  • Training Courses on Plant and Machinery Safety from Pilz

    November 19, 2024 Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training courses teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge… Read More…