AutomationDirect adds Helical Bevel Gearboxes with Cast-Iron Frames

November 14, 2019

The new IronHorse HBR series of helical bevel gearboxes combines the helical gearset with a bevel gearset to create an output that is perpendicular to the input. All HBR series gearboxes are hollow shaft output and accept double or single shafts. Dual and single output shaft kits are available. Helical gears offer a smoother, quieter operation than most other gear types.

The universally interchangeable compact design ensures easy OEM replacement and provides flexible installation with C-face and TC-face inputs, perpendicular output and 6 mounting positions. Five gearbox sizes support 56C up to 254/6TC NEMA motor frames and 6 ratios are available from 10:1 to 120:1. The helical bevel gearboxes are sized to handle from 1 to 24 hp motors.

The bevel gearboxes feature cast-iron (FCD45) one-piece housings and high hardness alloy steel (20CrMO) pinion and gears. Ironhorse helical bevel gearboxes from AutomationDirect start at $1070.00 and have a 2-year warranty.

Learn more by visiting: www.automationdirect.com/helical-bevel-gearboxes.

Related Articles

DCS Posital Upgraded EtherNet IP Infterface for Encoder 1 400

COMING SOON! Upgraded EtherNet/IP Interface for POSITAL Encoders

 

 

The updated EthernNet/IP communications interface helps optimize data transfer therefore minimizing downtime due to transmission delays. This improved protocol not only has advanced network management tools, it also supports a communications cap which allows installers to define the device’s IP address through a set of three rotary switches. High temperature warnings, monitored acceleration levels, and a time counter can all now be accessed through this upgrade. POSITAL’s implementation of this upgrade meets all requirements of the ODVA’s conformance testing.

 

DCS Panduit Cable Entry Systems 1 400x275
|

Panduit Cable Entry Systems

 

The Cable Entry Systems from Panduit offer a safe, organized method to transition both terminated and unterminated cables through enclosures and electrical equipment, providing strain relief while maintaining IP/NEMA ingress sealing ratings. These Cable Entry Systems offer the lowest total installed cost compared to traditional cable glands or cord grips, simplifying the installation and managing numerous cables in a very dense space. 

 

DCS Rockwell Automation Introduces New On Machine Drives 1 400

Rockwell Automation Introduces New On-Machine Drives

 

Rockwell Automation, Inc., one of the world’s largest companies dedicated to industrial automation and digital transformation, recently announced the release of its new Allen-Bradley Armor PowerFlex AC variable frequency drives for industrial motor control applications. The on-machine drives provide quicker installation, simple commissioning and predictive maintenance. 

 

|

DMC-3x01x The Latest Generation Single Axis Motion Controller from Galil

This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo…

DCS Panduit Make the Switch Easy 1 400

Make the Switch Easy from Category 6 to 6A!

 

Upgrading from Category 6 to 6A can be difficult due to differences in size as larger cable is harder to work with and requires more space in pathways. With the same diameter as a Category 6 cable, the Vari-MaTriX HD Category 6A copper cable simplifies upgrades by allowing you to utilize your same infrastructure. It’s time to make the switch from Category 6 to the easy-to-install, cost effective, Category 6A Vari-MaTriX HD cable.

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • For Systems Integrators: Embracing Vendor-Agnostic Network Technologies

    September 3, 2024 All-in-one platforms can add flexibility to a system integrator’s offerings The COVID-19 pandemic presented system integrators with a unique opportunity to evaluate manufacturer performance during a global disruption. Throughout this period, there have been numerous instances where end users have successfully utilized their diversified supply chains to enhance production by integrating more… Read More…

  • Understanding ABB Circuit Breakers

    September 3, 2024 A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by excess current. It functions as a switch that automatically interrupts the flow of electricity when it detects a fault, such as an overload or a short circuit, thereby preventing damage to the circuit, appliances, or electrical… Read More…