Teco Westinghouse: NEMA PREMIUM EFFICIENCY TEFC MV – SEVERE DUTY

September 17, 2019

NEMA 3-Phase Motors
60Hz, 2300/4000V
NEMA Design B, Continuous Duty
Class F Insulation, 40°C Ambient, 1.15 S.F.

For more than a century, TECO-Westinghouse motors have been recognized as industry examples in dependability and quality. The Global TEFC motor continues to provide the high quality and reliability that you have come to expect from TECO-Westinghouse. The feature packed Global TEFC has been designed and built for the most demanding applications in the industry.

Couple your Global TEFC with our TECO VFD’s for energy savings & speed control. TWMI offers a variety of heavy industrial drive and motor starting solutions.

Features

  • 150-2000HP
  • Totally Enclosed IP55 Design
  • 60Hz, 2300/4000V
  • Horizontal F1 Mount
  • 3600, 1800, 1200 & 900 RPM
  • NEMA Premium Efficiency
  • 1.15 S.F. Sine Wave Power
  • Class F Insulation
  • Class B Temperature Rise
  • Max Elevation 3300ft
  • Continuous Duty
  • NEMA Design B
  • 40°C Ambient
  • Open Bearings with Regreaseable Provisions
  • Insulated NDE Bearing
  • Polyrex EM Grease
  • Copper/Copper Alloy Rotor
  • Cast-Iron Frame, and End Brackets
  • Fabricated Steel Conduit Box and Fan Cover
  • Aluminum Fan 4, 6 & 8 Pole, Non-Sparking Plastic Fan 2 Pole
  • Number of Leads: 6
  • Solderless Lug Terminals on All Leads
  • Grounding Terminal Inside Main Terminal Box and on Frame
  • Paint System: Phenolic Rust Proof Base with Polyurethane Top Coat
  • Stainless Steel Nameplate
  • 1045 Carbon Steel Shaft Material
  • Labyrinth Type Steel Flinger on Both Ends
  • Form Wound Windings With Complete VPI Treatment
  • Bi-Directional Rotation Except 3600RPM Motors
  • Winding RTD’s, Space Heaters and Provisions for Bearing RTD’s
  • Vibration Probe Mounting Provisions
  • CSA Certified for Class I, Division 2, Groups B, C & D (Class I, Zone 2, Groups IIB+H2, IIB & IIA)
  • CSA Certified for Class II, Division 2, Groups F & G
  • Suitable for Across the Line or Reduced Voltage Starting
  • *CSA Certified for use on VFD (Please Contact TWMI for Speed Ranges)

Source

 

Related Articles

DCS-35-Endress-0XDNFullBore-400.jpg

Endress+Hauser Extending Pioneering 0 X DN Full Bore Option to More, Tougher Applications

Endress+Hauser is extending its world-first 0 x DN full bore option to more flow measuring applications, including tough ones with line sizes 25mm to 2400mm (1” to 96”). This option was launched initially for Promag W electromagnetic sensors for water/wastewater applications, but now also can be ordered with Promag P sensors in chemical and process applications.

 

 

 

DCS Harland Littlefuse AC Relay for HVAC and Industrail Switching 2 400

AC Relay for HVAC and Industrial Switching – HCR Series by Hartland Controls/Littlefuse

 

Hartland Controls’ relays provide power system on/off switching capabilities. The primary purpose of Hartland Controls/Littelfuse’s relays is to switch electrical circuits on and off in an instant. Relays are essentially electromagnetic switches activated by a low power signal or current in one circuit to open or close another circuit. They are most commonly used in power system networks and multiple automotive and industrial applications or HVAC where the system is controlled by 24 VAC, 120 VAC, or 240 VAC.

 

Beckhoff Introduces Contact-free, Flying Motion Technology with XPlanar

Beckhoff Introduces Contact-free, Flying Motion Technology with XPlanar

Beckhoff is unlocking entirely new possibilities in machine design with the introduction of XPlanar. In this innovative system for flying motion control, planar movers float freely above planar tiles arranged in customizable layouts and enable extremely flexible, precise and highly dynamic positioning. For machine builders and manufacturers, this results in maximum flexibility and simplification in machine and plant designs.

 

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • For Systems Integrators: Embracing Vendor-Agnostic Network Technologies

    September 3, 2024 All-in-one platforms can add flexibility to a system integrator’s offerings The COVID-19 pandemic presented system integrators with a unique opportunity to evaluate manufacturer performance during a global disruption. Throughout this period, there have been numerous instances where end users have successfully utilized their diversified supply chains to enhance production by integrating more… Read More…

  • Understanding ABB Circuit Breakers

    September 3, 2024 A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by excess current. It functions as a switch that automatically interrupts the flow of electricity when it detects a fault, such as an overload or a short circuit, thereby preventing damage to the circuit, appliances, or electrical… Read More…