SEW Eurodrive: SEW GearOil Premium Lubricant

May 27, 2019

Protect your valuable standard and industrial gear units –
from the first operation and during each service.

SEW GearOil premium lubricant – your benefits:

  • Compared to conventional mineral oils, SEW GearOil Base has an up to 50% longer service life 
  • A high level of resistance to aging reduces wear and increases the service life of lubricant and seals 
  • Damage load stage 14 improves protection from fretting on the gearing 
  • Low friction coefficients of the premium lubricant increase the gear unit efficiency 
  • No deposits thanks to self-cleaning properties which bind water and dirt particles 
  • High wear protection for the rolling bearing reduces the risk of an early failure of the rolling bearing 
  • Extended shelf life of up to 6 years compared to conventional lubricants 
  • SEW GearOil is tested according to the high quality requirements of the SEW-EURODRIVE test specifications no. 07 004 03 13

SEW-Eurodrive’s new premium lubricants have been developed to a special formula based on many years of experience and countless test runs. They reduce friction between gear wheels and extend the service life of wear parts such as sealing rings and even the lubricant itself.

The requirements imposed on our gear units by many applications regarding load and operating hours are steadily increasing. You should therefore use SEW GearOil as it significantly contributes to increasing the performance and service life of your gear units. Either for the initial fill of your gear unit or during service and maintenance work: the premium lubricant always increases the efficiency of the gear unit while protecting it from damaging oil foaming at the same time.

SEW GearOil can be ordered with a part number in canisters (5 or 20 liters) or barrels (205 liters). This saves operators the time-consuming task of searching for the right gear oil. In addition, there is no risk of leaks in gear units when the wrong types of oil and unauthorized lubricants are used. By using high-quality base materials and additives as well as separate logistics, we can ensure you always receive the highest level of quality.

Protect your valuable standard and industrial gear units – from the first operation and during each service.

For more information, visit HERE.

Related Articles

|

Compact Extra-Low Voltage Drives from SEW-Eurodrive

February 9, 2023 The new compact extra-low voltage drives are absolutely at home in the materials handling technology used in warehousing systems. They offer your applications high running smoothness, overload capacity and flexibility. They have a diverse range of potential uses, and they fit like a glove into even small installation spaces. For changing requirements…

| | | | |

ABB Reinforces Commitment to Circularity with First EPD Certified Instrumentation

August 27, 2024 ABB has announced its first instrumentation product with an Environmental Product Declaration, demonstrating its continued commitment to circularity and sustainability. The PGS300, an all-rounder gauge pressure transmitter, is used for measuring liquid, gas and steam pressure, and is key for the safety and efficiency in industries such as chemicals, oil & gas,…

| | | | | | |

Introduction to SEW-Eurodrive’s Innovation Lab

 

The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario reopening earlier this year, SEW Eurodrive has been excited to present their technology and automation solutions with customers, students, and the public again. Konrad Kurylo, P. Eng., was on site with other SEW Eurodrive experts to welcome an enthusiastic and engaged audience, who were eager to see what products and solutions SEW Eurodrive has to offer for Industry 4.0. 

 

SEW-EURODRIVE: Simple and Flexible I/O Expansion

SEW-EURODRIVE: Simple and Flexible I/O Expansion

Perfectly matched components are the key to efficient and high-performance machine automation. SEW-EURODRIVE offers a comprehensive product portfolio of all required components. From drive technology through control platforms to the human machine interface (HMI), we provide a finely scaled range of matched components, further enhanced and rounded off with the MOVI-PLC I/O system.

 

 

 

DCS SEW EURODRIVE Industrial Gear Units To Go 1 400

New SEW-EURODRIVE Industrial Gear Units To Go

 

In addition to robustness, individuality and high torque, industrial gear units are often associated with long delivery times. We are now bringing an end to these long delivery times. Our delivery time offer ATO 5 is now joined by ETO 15. For you, we will be faster and deliver your solution promptly – whether from our modular system or with customer-specific adaptations.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Vention Introduces AI, Making Adoption of Automation Easier

    December 20, 2024 By Krystie Johnston Vention has been on a mission to democratize automation since 2016. Etienne Lacroix, Founder and CEO of Vention, realized he could leverage software and technology to productize automation, making it more accessible to everyone. While working as an engineer and integrating systems for manufacturers, he noticed added costs and… Read More…

  • Machine Man Reflects on 50 Years In a Challenging But Rewarding Field

    December 18, 2024 Pat McCluskey’s machine design and build experience at ANCA has fuelled manufacturing exports for Australia for half a century For a half-century, ANCA has made the machines that make the tools that make the world go around. One half of its founding pair, Pat McCluskey, has designed many grinding machine tools in… Read More…