High Efficient BLDC Motor Family from Duowei Electric

DCS brushless Duowei 400

February 14, 2019

Brushless DC motors are often referred to as a brushed motor turned inside out because the typical brushless motor has permanent magnets which rotate around a fixed armature, eliminating problems associated with connecting current to the moving armature.

An electronic controller replaces the brush/commutator assembly of the brushed DC motor, which continually switches the phase to the windings to keep the motor turning. The controller performs similar timed power distribution by using a solid-state circuit rather than the brush/commutator system.

The latest Brushless DC motor is designed for Industrial Control, Medical Equipment, Auto Parts, Robot, Intelligent Storage, Fitness Equipment and other residential and light commercial pumps, fans and blowers.

Duowei2

Commutation with electronics instead of brushes allows for greater flexibility and capabilities not available with brushed DC motors, including speed limiting, “micro stepped” operation for slow and/or fine motion control, and a holding torque when 

The new Brushless DC motors have a compact design and thanks to low inertia they have high performances and are a low cost solution, some latest BLDC Motors already including Hall sensors and/or an encoder.stationary. Controller software can be customized to the specific motor being used in the application, resulting in greater commutation efficiency.

Go HERE fpr more information

Related Articles

SPPS Introduces 75 HP Single-Phase Motor

SPPS Introduces 75 HP Single-Phase Motor

Single Phase Power Solutions introduces a 75 hp single-phase electric motor to power industrial equipment like pumps, conveyors, grain dryers, and many types of industrial or commercial machinery.  The Belle Single-Phase Motor uses Written-Pole technology to deliver a 75 hp single-phase motor that is compatible with readily available single-phase utility services.  The utility-friendly starting and operating characteristics provided using Written-Pole technology minimize voltage sags and flicker on long single-phase distribution lines.

 

 

 

DCS Nidec Launches SynRA for US Market 1 400

Nidec Launches SynRA, for the US Market, the World’s First Aluminum Cage-equipped, High-efficiency Synchronous Reluctance Motor that Achieves IE5, the Highest Level of the IEC Standard

 

Nidec Corporation recently announced that it has launched for the US market SynRA (Synchronous Reluctance Motor with Aluminum Cage Rotor), the world’s first aluminum cage-equipped, high-efficiency synchronous reluctance (SR) motor that combines an SR motor with the cage-type induction motor’s basic principles. The cage-type induction motor, used as a general-purpose motor for industrial applications, can be activated when connected to a commercial power supply. In addition, the motor, which does not require an inverter (the device to control rpm), does not cost a lot to introduce, and this is why it is used in fans, pumps, compressors, cranes, elevators, and many other industrial machines

 

| |

CODI Manufacturing Designs and Built New Case Packer in Four Weeks with Festo Engineering Tools and Assembly Services

November 21, 2024 CODI Manufacturing’s new compact, flexible 12-cycle-per-minute case packer for small to mid-sized food and beverage companies achieves an industry leading price/performance ratio. The Littleton, CO-based machine builder utilized the Festo Handling Guide Online (HGO) engineering tool to design the two-axis handling system, the core of the new machine’s package handling. By having Festo assemble…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Why Use Low-Consumption Contactors in Your Motor Control Systems?

    April 15, 2025 By Tiffany Moore Organizations are under more pressure than ever to improve sustainability metrics. How can you help them succeed — and win more business in the process?    Building motor control systems with more sustainable parts is one piece of the puzzle. Control panel builders, system integrators, and design firms have an… Read More…

  • The Long Cable Run Dilemma: Where Should You Install the VFD?

    April 15, 2025 By Damien Herwegh Sophia, a dedicated electrical engineer in a large industrial complex, has been tasked with installing a drive system where the motor is located hundreds of meters away from the control room. Like many engineers before her, she considers the usual question: Should I place the drive in the electrical… Read More…