Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

October 6, 2020

Suitable for high pressure jet washdown, the Q25 and Q30 are a perfect fit for material handling or off-highway vehicle applications where reverse voltage and over voltage protection is required, and with low heat generation, these are suitable for mounting into heat sensitive plastics.

The Q25 & Q30 have been designed with a new internal construction making the light output APEM's brightest yet. IP67 and IP69K sealing (front side) combined with a more advanced voltage range with built-in safety.


• Oil and gas – critical environments
• Transportation – rail and telematics
• Generators and inverters
• Vehicles
• Food and Beverage
• Port equipment
• Traffic and parking
• Robotics and production line assembly


• The indicators are designed and accustomed with vehicle applications, plant machinery and power generation in mind and are internally protected against reverse voltage and transient spikes
• 12 V to 24 V are both AC and DC meaning there is no polarity
• With 6 COB LEDs these are arranged in 3 strings of 2 and each of the 3 strings has one regulator, so is “triple redundant”
• For DC automotive applications the indicators will illuminate at 7.5 V and withstand up to 35 V


• Long distance and daylight viewing which is clear and unambiguous
• Rear end sealing giving long term protection against extreme environments
• The chamfered stainless steel 316L bezel complete with molded lens gives a premium look and feel whilst providing protection against UV sunlight, water, salt, dust, cleaning fluids, break fluids, bleaches, grease and oil


• Custom wire lengths
• Connectors

APEM’s strength for a full turn-key service offers customers a complete HMI solution.


• Stainless steel 316L marine grade chamfered bezel
• IP67 & IP69K sealed
• A fresnel lens provides an all-round homogeneous illumination which is perfect for long distance viewing and is also daylight viewable
• Rear end sealed
• Hard waring 20AWG wires UL1061


• Bushing diameter 25 mm & 30 mm with chamfered bezel finished in Stainless Steel 316L or Black Anodized Aluminum
• Illuminated by chip on board (COB) construction comprising of x6 single colored SMT LEDs
• Built in failsafe circuits for hazardous or critical applications and 200mm wire 20AWG
• Fresnel lens colors in red, yellow, green, blue and white
• Operating temperature: -40 °C / +85 °C, storage temperature -40 °C / + 100 °C
• Front panel sealing: IP67 & IP69K with rear epoxy sealed bezel



What drives the requirement for accurate, high-quality labels? With so much hanging in the balance for manufacturers and retailers competing on a global scale, there's no good reason to ignore the need for label quality. Mislabeled packaging could have consequences that range from wasted product to (potentially severe) consumer health issues.

Let's take a look at four major areas that illustrate the importance of ensuring the accuracy and legibility of product and packaging labels and discuss a solution that can help avoid errors.

Area 1: General product traceability

Product traceability, in a general sense, is essential for consumer safety, regulatory compliance and overall quality perception. If there’s a problem with a product, traceability allows the consumer, retailer or another entity to quickly locate and segregate defective products in the event of a recall.

Read More


Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil