Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

1

DCS-23-Danfoss-NovoConMLXL-400.jpg

Roughly 5 years ago Danfoss introduced NovoCon S, the first of its kind digital actuator specially designed for AB-QM pressure independent control valves (PICVs). At the time this was a revolutionary actuator for controlling flow’s through terminal units in hydronic HVAC applications.

 

 

 

Regal Beloit Corporation recently announced the introduction of its new Browning TorqTitan notched belt. The TorqTitan notched belt utilizes innovative elastomers, optimized cord arrangements and notch profiles to make it the most power-dense and energy-efficient V-belt that Regal has ever produced.

 

 

 

1

SEW-EURODRIVE's servo gear units stand for dynamics and precision. They feature a sturdy, warp-resistant design and a compact build. They offer low-backlash planetary servo and helical-bevel servo gear units that cover a torque range of 25 to 3000 Nm and can be used even in complex motion control applications.

 

 

 

1

The podis/gesis motor starters for decentralized applications close to motors are based on the podis power bus solution and can be used in harsh industrial environments.

 

 

 

1

New additions to AutomationDirect’s offering of WEG Electric motor controls expand its application space in solutions for switching and controlling motorsThe WEG Electric CWB series of IEC contactors meets the requirements of a wide range of industrial applications.

 

 

 

1

RS Breakers & Controls have a massive inventory of current and vintage MCC Buckets, also referred to as wrapper buckets or wrapper units. Whether you’re looking to upgrade, retrofit, like-for-like swap, or buy new, RS can provide you the solution for all your needs.

 

 

 

1

The IANG1 Integrated Stepper Controller + Drive product is a ground-breaking approach to PLC-based motion control systems. Traditional motion controllers are difficult to integrate with PLC-based automation systems. There are so many manufacturers, so many different choices, and each solution contains proprietary features that complicate installation, programming and compatibility.

 

 

 

1

Murrelektronik optocouplers, slim interface relays and multi-mode relay timers are now available from AutomationDirect. Murrelektronik optocouplers (from $16.50) are used to combine different signal levels or to isolate one signal from another. Optocouplers are similar to relay interfaces, providing an optoelectronic signal transfer between input and output.

 

 

 

1

As an operator of complex systems, you need to ensure that different motion sequences, multiple axes, and various drives are precisely coordinated with one another The efficiency of your production depends on this. In order to ensure this required intelligent coordination, you also need both intelligent and reliable control technology.

 

 

 

1

JVL has recently developed a new and unique product in the field of integrated motor control. JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors.

 

 

 

1

PB-42-Allied-ECIANewGlobalMember-400.jpg

Electronic Components Industry Association (ECIA) was recently pleased to announce that Electrocomponents plc, a global omni-channel solutions partner for electronics, industrial and automation customers and suppliers has joined the association as a global member, along with its subsidiaries Allied Electronics & Automation (Allied), a distributor of automation and control, electronic, electrical, mechanical, and maintenance products in North America and RS Components (RS), a global distribution partner for industrial customers and suppliers involved in designing, building or maintaining industrial equipment and facilities.

Electrocomponents will be represented on the ECIA by Chris Beeson, Senior Vice President of Electronics at RS. Peter Malpas, EMEA Regional President for RS; Sean Fredricks APAC Regional President for RS; and Ken Bradley President of Allied in the Americas will represent their respective regions.

“We recognize the importance of partnering with other industry leaders in electronics manufacturing and distribution to stay on the cutting edge of technology for the wide-ranging benefit of our customers,” said Beeson. “Membership in ECIA allows Electrocomponents, Allied and RS to have a seat at the table with other global distribution and manufacturing leaders to solve problems and advance our industry.”

“We are excited to work alongside our distributor peers and suppliers as ECIA tackles critical industry issues and global technical standards,” said Bradley. “This is an excellent opportunity to focus our collective power on customer-facing challenges we can solve together.”

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil