Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

DCS-23-Bender-IsoCHA425-400.jpg

March 31, 2021

Bender, a manufacturer of electrical safety products worldwide, has recently released a new insulation monitoring device, the isoCHA425HV+AGH420-1, that meets both common charging standards: CSS and CHAdeMO. This will benefit EVSE manufacturers that employ both systems in a single DC fast charging station. Until now, two different devices have been required for insulation monitoring in DC fast charging stations.

A galvanically isolated Modbus RTU interface is available for communication with the device. Customer-specific parameters are preset for the respective standard. Changes to the settings can be accomplished via a pushbutton and menu structure on the device or via the Modbus protocol. The device is designed for voltages of up to 1,000 V, thus already taking ever increasing battery voltages into account.

In addition to monitoring the insulation level, the device is also capable of measuring the nominal voltage during charging and will alarm if the voltage exceeds or drops below self-defined limit values. Furthermore, the system leakage capacitance of the charging station and the vehicle is monitored. If insulation faults occur, the fault location is displayed (DC+/DC-/symmetrical). This helps the service technician assess the status of the charging station and facilitates fault location.

Technical features:

  •    -   Fast trip on asymmetric faults ≤ 1 second
  •    -   Trip on symmetrical faults
  •    -   Voltage measurements up to 1,000 V
  •    -   Modbus RTU communication


This is a major benefit compared to conventional insulation monitoring devices for DC charging stations. According to CHAdeMO, typical IMIs only monitor single-pole faults and do not detect symmetrical faults. Environmental factors can lead to aging of the charging cables, which generally results in a consistent drop in the insulation level, so that, in the event of symmetrical faults, there is no tripping, even though the insulation level has dropped. The Bender IMIs features make it possible to increase the protection level in CHAdeMO mode which leads to an increase in safety for users and equipment.

Source


Editor's Pick: Featured Article


DCS-24-HELUKABEL-VFDs-400.jpg

The variable frequency drive (VFD) cable business has become a very large market for cable manufactures in the last 20 years. In the past, standard AC motors had the complexity of a squirrel cage motor – just get power and it would run. The first silicon controlled rectifier (SCR) was developed by Bell Labs/GE in 1958 to vary the speed of DC electric motors used in various applications. Since then there have been motor speed control technology evolving from large-scale integration (LSI), gate turn-off thyristor (GTO), pulse-width modulation (PWM), insulated-gate bipolar transistor (IGBT), and space vector pulse-width modulation (SVPWM). These new forms of power conversion to support speed control in VFD motors has caused the demand on the cables to change as well, which has led to many new cable options.


Read More


 

Latest Articles

  • Prev
Join in with Rittal to sharpen up your IT & Industrial infrastructure, as well as your mission ...
Certified Electrical Safety Engineer (CESE) is an internationally recognized professional ...
Common in most industrial settings, electric motors are broadly grouped as those driven by ...
Machine safety is one of the most important requirements in factory automation and it can also be ...
Allied Electronics & Automation has strengthened its robust roster of more than 500 world-class ...
ABB has recently been awarded a major turnkey contract by Statkraft, Europe’s largest generator of ...
Traditionally, many industrial companies have relied on their service providers to help keep their ...
Some ten billion bearings are manufactured each year and, given the harsh conditions to which they ...
Keeping workers safe and keeping the production line going may seem contradictory, but in most ...
The design of HVAC systems poses unique challenges for things like motor control and circuit ...

DCS-24-Epiroc-DigitalTransformation-400.jpg

As the mining business adapts to changing technological trends in the market, Epiroc’s Canadian operations have introduced Regional Application Center (RAC) teams to assist in this new digital transformation.

Team of experts that supports digital transformation

Across the board, mining projects are continually pushing for increased production while prioritizing safety. With this in mind, Epiroc has assembled specialized automation and digitalization support systems in strategic locations across the globe to help improve customer processes and boost productivity. The result is a heightened level of production that keeps workers out of danger zones on site while providing enhanced strategic direction for customers. Interoperability improvements have reduced variability and allow project planners to move towards their targets with renewed confidence. 

Read More


 

Latest News

  • Prev
Machine safety is one of the most important requirements in factory automation and it can also be ...
Allied Electronics & Automation has strengthened its robust roster of more than 500 world-class ...
Keeping workers safe and keeping the production line going may seem contradictory, but in most ...
The design of HVAC systems poses unique challenges for things like motor control and circuit ...
ABB has provided electrification, connected control and operations management systems, ...
With interest in driverless cars increasing all the time, and with car manufacturers looking for ...
Tundra was recently excited to announce that they’re now a part of the Wajax Corporation. Be sure ...
In October of 2020, orders in the mechanical and plant engineering sector matched the previous ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil