Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

 

November 6, 2018

Endress+Hauser has invested more than 10.4 million euros in a new, state-of-the-art production facility at its location in Nesselwang, Germany. The 4,800-square-meter building contains new production and office space, in addition to technology and common rooms. With the expansion, the Endress+Hauser Group is making further investments in sustainable growth.

The expansion was driven by the growing demand for innovative temperature technology and system products, as well as the introduction of new product lines. “We are constantly investing in our centers of competence in order to develop persuasive solutions for our customers and to increase production efficiency,” said Matthias Altendorf, CEO of the Endress+Hauser Group, during the dedication ceremony, which was held on 26 October 2018.

In many processes, temperature is a measurement parameter with a major influence on product quality. “We will continue to expand and round out our temperature and system product portfolio so that we can be in a position to optimally serve our customers in the future as well.

To do that, we need additional space for research and development, production, logistics and quality assurance, which this new building provides,” said Harald Hertweck, Managing Director of the Endress+Hauser center of competence for temperature measurement technology.

 

Sustainable expansion

The new building is an eye-catcher with an impressive, intelligent architecture featuring a sloping facade that offers protection against the sun, plus glass fronts that let in an abundance of light. The new building also boasts a sustainable energy concept, including a photovoltaic system installed on the roof that provides enough electricity to completely power the basic production load. E-bike charging stations further underscore the emphasis on sustainability.

While the building was being constructed, the production and and logistics processes were also optimized and structured in accordance with Lean Principles and the One Piece Flow approach. This structure enables the center of competence to increase the individual responsibility of the employees, add more flexibility to the production process and optimally utilize the capacity of the machines and operational resources.

 

Center of competence for temperature measurement technology

Endress+Hauser Wetzer, the Group’s center of competence for temperature measurement technology and system products, which is headquartered in Nesselwang, Germany, operates five additional production facilities in Pessano (Italy), Greenwood, Indiana (US), Suzhou (China), Aurangabad (India) and Benoni (South Africa).

The company received several awards this year for the iTHERM TrustSens, the world’s first self-calibrating thermometer. In addition to awards in France (Mesures, CFIA) and the Czech Republic (Zlatý Amper), Endress+Hauser was also the recipient of the HERMES AWARD, a renowned industry prize, in addition to the AMA Innovation Award at the SENSOR+TEST trade fair in Nuremberg, Germany.

Latest Articles

  • Prev
  The Ontario government has concluded a successful trade mission to South Korea and ...
  ABB and Hydrogen Optimized Inc. (HOI), the Canadian technology innovator unlocking ...
  What’s the secret to providing superior service and staying competitive in a changing ...
  When the Swiss engineering company Peter Huber AG won the order to upgrade and ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...
  NSK is a global manufacturer of ball and roller bearings, precision linear motion and ...
  World leaders from government and industry will meet in the southern Denmark city of ...
  The safety and well-being of tunnel users depend on excellent ventilation. With its ...
  ABB recently hosted Billions of Better Decisions - Empowering the Workforce with the ...
  The ABB #BuildtheFuture Roadshow delivers the latest electrical products, services, ...

 

DCS HPS Putting Power Quality to the Test 1 400x275

The HPS Power Quality Lab allows customers to experience real time testing of line side HPS power quality products such as transformers, line reactorsactive harmonic filters and passive harmonic filters as well as load side products such as load reactors and different types of dV/dT filters with various cable lengths. The power quality products can run at full load using either 10HP, 25HP and 100HP VFD systems and associated motor/load. 

The HPS Power Quality Lab will be available for booking starting in October.

HPS Power Quality Lab FAQs

Where is the HPS PQ lab located?

The HPS PQ Lab is located at our Headquarters in Guelph, Ontario, Canada.

What products can be tested in the HPS PQ lab?

The main products that can be tested are line/load reactors, passive harmonic filters, active harmonic filters and dV/dT filters.

How long is a typical session in the lab?

It is expected that a session will typically be completed within 1 hour depending on how many products, sizes and operating conditions are to be addressed.  

Read more here


 

Product News

  • Prev
  ABB has launched ABB Ability Cyber Security Workplace (CSWP) which enhances the ...
  AutomationDirect has added more color choices for Direct Wire 1kV ALL-FLEX MTW/THHW ...
  Panduit has a full line of labeling products, software, and printers to assist you ...
  Many of our Canadian industrial processes use large amounts of heat generated by ...
  AutomationDirect has added SSP safety enabling switches, also known as “hold-to-run” ...
  From the individual component to the complete automation solution, we have been ...
  Atlas Copco announces the launch of a new generation of its variable speed drive ...
  These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They ...
  Allied Electronics & Automation, a trading brand of RS Group plc, offers around ...
  Coming soon! POSITAL’s LINARIX family of linear sensors will soon include a new ...

New Product

DCS Keep Your Distance and Saty Safe New MP8000 Bluetooth Enabled Safety Relay from Littelfuse 1 400x275

Introducing the Revolutionary New MP8000 Bluetooth® Enabled Overload Relay. This smart, universal relay can communicate directly with your smart phone via Bluetooth®. No need to open the control panel. Monitor and control unlimited relays through the Littelfuse App on the smartphone you already own from a safe distance.

Sign Up for an In-Person Demo Today!

"This is a HUGE opportunity. During a new installation, I can be right next to the motor at start up to see if it’s binding (or other problems).”



To read more, click here


 


Featured Product

DCS With Breakthrough 4 Tube Technology and Larger Sizes Endress Hauser Promass Q Finds New Roles in Oil and Gas 1 400x275

Promass Q 300/500, the high-tech Coriolis flowmeter series from Endress+Hauser for demanding fluids, now boasts revolutionary 4-tube technology, opening up numerous additional applications in the oil and gas industry in particular – for example, as a highly accurate duty meter for custody transfer and fiscal metering, or as a precision reference device (master meter) for on-site verification measurements. Furthermore, Promass Q now is available for three larger pipe sizes: DN 150 (6”), DN 200 (8”) and DN 250 (10").

Compared to Coriolis flowmeters with two measuring tubes, four-tube measurement allows up to 25% higher flow rates. This accelerates all transactions and ultimately saves money. For example, it reduces standstill times for loading and unloading oil tankers, resulting in lower charges.


To read more, click here


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil