Events Calendar
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
Editor's Pick: Featured Article
Invertek Helps Support New Woodlands Through Forest Carbon
New woodlands are being created in the UK with the help of Mid Wales-based Invertek Drives through the Forest Carbon project to offset its carbon footprint. The company, which manufactures variable frequency drives (VFD) at its global headquarters at Welshpool, Powys, has worked with a local printing company to purchase ‘carbon balancing’ paper for all of its in-house printers, including the printing of its products’ handbooks.
Forest Carbon plants woodlands for companies wanting to mitigate the impact of their greenhouse emissions, as well as making a contribution to wider environmental benefits. It is the only UK-based carbon standard and is supported by the government.
The woodlands are planted at locations where they would not otherwise be commercially viable. The paper purchased by Invertek Drives is currently helping plant trees on land near Carlisle, Cumbria.
The new woodlands will not only help capture CO2, but also provide benefits for local biodiversity, landscape, flood management, water quality and recreation.
Referring to companies like Invertek Drives, Carbon Forest states: “These are companies who already avoid and reduce their emissions as far as they can and want to finish the job by capturing the remaining balance.”
Latest Articles
ECIA Welcomes The Electrocomponents Group as a Global Member
Electronic Components Industry Association (ECIA) was recently pleased to announce that Electrocomponents plc, a global omni-channel solutions partner for electronics, industrial and automation customers and suppliers has joined the association as a global member, along with its subsidiaries Allied Electronics & Automation (Allied), a distributor of automation and control, electronic, electrical, mechanical, and maintenance products in North America and RS Components (RS), a global distribution partner for industrial customers and suppliers involved in designing, building or maintaining industrial equipment and facilities.
Electrocomponents will be represented on the ECIA by Chris Beeson, Senior Vice President of Electronics at RS. Peter Malpas, EMEA Regional President for RS; Sean Fredricks APAC Regional President for RS; and Ken Bradley President of Allied in the Americas will represent their respective regions.
“We recognize the importance of partnering with other industry leaders in electronics manufacturing and distribution to stay on the cutting edge of technology for the wide-ranging benefit of our customers,” said Beeson. “Membership in ECIA allows Electrocomponents, Allied and RS to have a seat at the table with other global distribution and manufacturing leaders to solve problems and advance our industry.”
“We are excited to work alongside our distributor peers and suppliers as ECIA tackles critical industry issues and global technical standards,” said Bradley. “This is an excellent opportunity to focus our collective power on customer-facing challenges we can solve together.”
Product News
New Product
Safety Light Curtains PSENopt II - Second Generation
The second generation of safety light curtains, PSENopt II, provide safe access to the production process and provide finger, hand and body protection, depending on the requirement. The first Type 3 safety light curtains are specifically designed for applications up to PL d of EN/IEC 61496-1. Type 4 light curtains are also available for applications up to PL e of EN/IEC 61496-1/-2.
As the units are so robust, PSENopt II sensors provide protection against shock, collision and vibration and so are suitable for use in rugged industrial environments. The operator can evaluate the essential causes and system defects responsible for the machine stop by means of the LEDs. Downtimes are reduced as a result.
The safety light curtains are available in lengths from 150 mm to 1800 mm. In combination with the configurable control system PNOZmulti 2 you have a safe, complete, one-stop solution. Compatible accessories range from installation assistance through to mirror columns.
New: Accessory for the light curtain PSENopt II to prevent restart
With our new accessory PSENopt II lockout for the PSENopt II range of light curtains you can prevent the machine restarting. This is necessary, for example, when carrying out maintenance work within the danger zone. PSENopt II lockout consists of an assembly unit that is attached to the side of the light curtain like a swivel arm. If the danger zone is accessed, the swivel arm can be folded out in front of the light curtain’s field of vision and fitted with a lock. As a result the light curtain no longer has a free field of vision, so start up is prevented.
Latest News
Daily News
WEG Receives CS A Qualification for Certification Program
WEG Motors, one of the WEG Group Business Divisions that manufactures motors and gearboxes, has recently been requalified by CSA Group Testing and Certification Inc. as a Testing Facility for electric motors.
Within its Certification Program, CSA has granted WEG the certificate for Qualification of Test Laboratories, which qualifies the company to perform its own electric motor tests, including tests for explosive atmospheres, aiming at safety and energy efficiency, in line with the standards applicable in several markets. WEG has had this accreditation for over 25 years, which proves a long-standing partnership.
The CSA (Canadian Standards Association) Group is a global organization dedicated to safety, social assistance and sustainability. It is a leader in standards development and testing, inspection and certification worldwide, including Asia, Europe, Canada and the US, where the company also has accreditation from the Occupational Safety and Health Administration (OSHA), allowing certification of equipment for the North American market.
As a result, there is a benefit on the certification process for the Canadian and US markets, which are widely served by WEG through its subsidiaries and distributors since the certification allows WEG to supply electric motors tested in Brazil, where WEG is headquartered, mainly to customers from the USA territory, with certification time savings and shorter delivery times.
