Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

January 19, 2021

Stainless Steel Washdown motors are specifically designed for the rugged and demanding environments required for Car Wash, Food Processing, and other Washdown applications.

Features

  •    -   1/2-10HP
  •    -   Totally Enclosed Fan Cooled IP66 Design
  •    -   60Hz, 230/460V or 575V
  •    -   Horizontal F1 Mount
  •    -   3600 & 1800 RPM
  •    -   NEMA Premium Efficiency
  •    -   1.15 S.F.
  •    -   Class B Temperature Rise
  •    -   Continuous Duty
  •    -   40°C Ambient
  •    -   Class F Insulation
  •    -   NEMA Design B Torques
  •    -   Stainless Steel Frame, End Brackets and Hardware
  •    -   Grounding Terminal Inside Main Conduit Box
  •    -   Stainless Steel Oversized Main Conduit Box – F3 Mounted (IM1001)
  •    -   Designed for 3300 ft. Elevation
  •    -   Bi-Directional Rotation
  •    -   SUS304 Stainless Steel Shaft
  •    -   Double Shielded Bearings Pre-Packed with MULTEMP SRL
  •    -   Contact Lip Type Seal on Both Ends
  •    -   Etched Nameplate on the Stainless Steel Frame
  •    -   New Dual Column Design Nameplate as Standard (60/50 Hz)
  •    -   Aluminum Die Cast Squirrel Cage Rotor Construction
  •    -   Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
  •    -   Inverter Duty Speed Range: 10:1 Variable Torque, 4:1 Constant Torque
  •    -   9 Leads
  •    -   Two Drain Holes on Bottom of Frame and one in the C-Flange
  •    -   Motors are U.L. Recognized, CSA Approved and CE Marked
  •    -   Department of Energy Efficiency Certificate # CC082A
  •    -   Encapsulated Windings as Option


Source

Allied Motor MaintenanceSmall motors – both AC and DC – serve as critical points in industrial operations. They may be integral to automation and equipment control and serve multiple purposes to mechanically drive and actuate systems and equipment, but are often replaced rather than repaired or reconditioned.

Larger motors may be repaired, rewound, and sent into a motor rewind pool.  However, many motors will simply be replaced when imminent signs of failure are detected using smart equipment, instrumentation, and tools discussed below.

 

 

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil