Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

September 20, 2019

FLIR Systems, Inc. recently announced the FLIR CM94 2000-amp AC/DC electrical utility clamp meter. Designed to tackle high current electrical measurements in demanding utility and industrial job sites, the CM94 features an oversized jaw to easily manage larger conductors and busbars. With CAT IV-1000-volt overvoltage protection, the CM94 works on relays, distribution panels, vaults, switchgears and switchboards, as well as on service conductors, feeders, and production power lines.

The durable clamp meter’s 55-millimeter (2.2 inches) jaw easily clamps around large conductors or multiple conductors at once. With True-RMS (root mean square) to measure alternating voltage or current, and Low Impedance (LoZ) mode to clear ghost voltages, the FLIR CM94 provides accurate testing capabilities to get the job done right the first time and keep electrical workers safe.

In industrial facilities with AC and DC motors, motor control centers, and variable frequency drives (VFD), the clamp meter’s VFD mode tackles noisy signals to ensure accurate readings. In addition to performing current and voltage functions, industrial electricians, utility workers, and electrical contractors can troubleshoot connections and components with a continuity test mode, diode test and resistance, or frequency and temperature measurements. The IP40-rated CM94 is drop-tested to withstand a 2-meter drop from a ladder or into a utility vault.

The FLIR CM94 will be displayed at NECA 2019 in Las Vegas, Nevada from September 14-17 at FLIR booth #2941. It is available today for purchase online and through authorized FLIR distributors globally.

For more information visit https://www.flir.ca/products/cm94.


Editor's Pick: Featured Article


Powerflex 755tThere’s a contaminant that has long troubled water and wastewater operations, and you won’t find it in the water.

Harmonic distortion is like a pollutant on a power line. It can cause electrical equipment to act erratically or shut off, resulting in unplanned downtime. And it can frustrate workers by making water treatment systems more difficult to optimize.

The IEEE 519 standard gives industry a target to achieve: a total harmonic distortion of 5% or less. The question is, how do you hit this target with minimal risk or impact to your operations?

Read More

 

 

Latest Articles

  • Prev
Hammond Power Solutions (HPS) is proud to announce the release of their newly redesigned website. ...
What would a world without internal combustion engines look like? While this is not the current ...
  WEG / VJP is a proud sponsor of the upcoming IEEE Petroleum and Chemical Industry (PCIC) ...
  Earlier this year, while attending Hannover Messe 2019, I had the privilege to partake in ...
There’s a contaminant that has long troubled water and wastewater operations, and you ...
Introducing enhanced programmability and functionality for AC drives and control systems, thanks to ...
At Hannover Messe, ABB showcased its low-voltage MNS innovations that enable safe, flexible and ...


3M Canada WebinarRegister for 3M Canada’s upcoming webinar: How TTS™ Heat Trace Cables can help you on site.

3M Canada will be hosting a heat trace cables webinar, where you’ll learn about heat trace, heat trace applications (i.e.: pipe freeze protection, roof and gutter, and surface snow and ice melting), and the benefits of self-regulating heat trace cables—TTS™ Heat Trace Cables.

 

 

 

 

Read More

Flir Application SpotlightWithout power, factory operations cannot continue. That’s why regular scheduled maintenance is important to ensure your electrical distribution system is in working order. A combination of a thermal imager and a clamp meter can help you detect hot spots and diagnose electrical issues at the point of failure before an outage occurs, quickly and safely.  Download the Application Spotlight today.

 

 



Read More


Motor Feature


Festo Automation SuiteWith the free, PC-based Festo Automation Suite commissioning software, getting a new drive package up and running couldn’t be simpler and faster. Only five easy steps are needed to parameterize and configure all parts of an installation, from the mechanical system to the controller using the Automation Suite’s commissioning wizard. It’s all very intuitive.

The Automation Suite is one of Festo’s digital tools to simplify and accelerate automation projects. It works with both Festo and third party controllers.

 

 

Latest News

  • Prev
Hammond Power Solutions (HPS) is proud to announce the release of their newly redesigned website. ...
  WEG / VJP is a proud sponsor of the upcoming IEEE Petroleum and Chemical Industry (PCIC) ...
Introducing enhanced programmability and functionality for AC drives and control systems, thanks to ...
At Hannover Messe, ABB showcased its low-voltage MNS innovations that enable safe, flexible and ...

Rittal & EPLAN Pump out a Powerful Solution for Metro Vancouver

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil