Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

August 29, 2019

In response to high demand, SCHUNK has increased its product line of power-amplified 5-axis vises which are now equipped with an adjustable center: The maintenance-free SCHUNK KONTEC KSX-C is now available in four base body lengths (330 mm, 430 mm, 500 mm, and 630 mm) and two heights (174 mm, and 125 mm). The high-quality 5-axis vises have two jaws, which can be precisely moved by a laser-etched ruler. The clamping forces can be adjusted without tools between 4 kN and 40 kN, and are measured directly on the workpiece. The vise also provides plenty of power for a safe hold even in cases with mini-mal clamping surfaces. Workpieces are clamped within seconds with the help of 160° quick clamping in a vibration resistant manner and at a high repeat accuracy. Due to clamping by tension, the bending load at the base body is minimized. Moreover, the jaw guidance sys-tem and the arrangement of the clamping mechanism provide for a very rigid and dimen-sionally stable set-up, and therefore creates the ideal conditions for precise machining of the second side.

Fully encapsulated

The drive and the adjustment mechanism of the 5-axis vise are fully encapsulated, and therefore protected against the ingress of chips, dirt, and coolant. The easy-to-clean design of the vise avoids the accumulation of chips. Therefore, the KONTEC KSX-C can be seamless-ly integrated into the modular system for highly efficient workpiece clamping from SCHUNK. The clamping pins of the SCHUNK VERO-S quick-change pallet system can be used for direct mounting of the base body without requiring an adapter plate. Combined with the quick-change pallet system, the vise can be exchanged on the machine table within seconds and at maximum repeat accuracy. It can be equipped with standard, aluminum or special 5-axis top jaws, pendulum plates, or with many other standard jaws from the world’s largest range of standard chuck jaws from SCHUNK.

Source


Editor's Pick: Featured Article


DanfossWith more than one million square feet of exhibit and meeting space, the LEED Platinum-certified Enercare Centre at Exhibition Place in Toronto, Ontario, is the ninth-largest convention centre in North America. Located on the shores of Lake Ontario, the convection centre experiences the extreme weather that the Great Lakes region is known for – with temperatures ranging from -31°C (-24°F) to 40°C (105°F).

That puts a big burden on Exhibition Place’s HVAC equipment to keep the pace comfortable for more than 5.5 million visitors attending meetings, conventions, and exhibitions throughout the year. 

Read More

 

 

Latest Articles

  • Prev
 When selecting a motor, it is important to consider the required duty cycle to ensure the ...
  Last fall Drives & Control Solutions had the opportunity to tour Yaskawa America’s ...
ABB is proud to announce it has been selected as one of Canada’s Best Employers by Forbes Magazine ...
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors ...
  With more than one million square feet of exhibit and meeting space, the LEED ...
As an engineer, the responsibility to adopt not just the latest, but the safest technologies, never ...
Keeping pace with significant advances in motor speed control technologies, the International ...
What would a world without internal combustion engines look like? While this is not the current ...
There’s a contaminant that has long troubled water and wastewater operations, and you ...

Motor Feature


50 HP 1-to-3 Microgrid Power Source Single Phase Power Solutions introduces the 50 HP 1-to-3 Microgrid Power Source featuring a patented BELLE Motor with Written-Pole technology to deliver three-phase power from single-phase utility service. The 50 HP 1-to-3 can be used to operate a 25 HP motor three-phase motor, and multiple other motors up the remaining 25 HP of capacity. Ideal for areas without three-phase service, this revolutionary approach eliminates the high fuel and maintenance costs, and the pollution of fossil-fuel-powered Gen-Sets, while delivering superior power quality to that of a conventional phase converter.  It is far more cost effective than extending 3-phase power where it is not currently available. 

Latest News

  • Prev
ABB is proud to announce it has been selected as one of Canada’s Best Employers by Forbes Magazine ...
Keeping pace with significant advances in motor speed control technologies, the International ...

Rittal & EPLAN Pump out a Powerful Solution for Metro Vancouver

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil