Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

July 29, 2019

Servo2Go.com announces the release of the DZRALTE Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications!

The DZRALTE Series are digital servo drives that control brushed & brushless servomotors in a compact form factor which make them ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM) which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM drives. The command source can be generated internally or can be supplied externally.  In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The DZRALTE Series feature a RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking.  All drive and motor parameters are stored in non-volatile memory.  Drive commissioning is accomplished using AMC’s powerful & user friendly free DriveWare software.

The combination of a DigiFlex® Performance™ DZRALTE servo drive with its DriveWare software establishes a new benchmark in versatility!  Capabilities built into the DZRALTE servo drives include:

  • Size Ranges:  10-175 VDC @ 6A to 30A continuous (60A peak) Output
  • Full tuning control of all three servo loops: Position, Velocity and Torque
  • Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
  • Status window with over 50 simultaneous channels for drive and system diagnostics
  • I/O configuration configurable to latch/non-latch as well as active-high & active-low
  • Universal servo motor compatibility by means of automatic commutation adjustment
  • Dual Loop Feedback - Increases both stability and accuracy 

Additional information on the DZRALTE Series Servo Amplifiers can be found at- https://www.servo2go.com/catalogsearch/result/?q=DZRALTE


Editor's Pick: Featured Article


 

The savings keep coming when you use a variable frequency drive (VFD) with synchronous bypass and transfer capabilities. It can help reduce up-front capital costs and long-term energy and maintenance costs in various motor-control applications. And along with the cost savings, the VFD can help you increase efficiency and achieve more flexible process control.

A VFD with synchronous capabilities allows you to operate one motor continuously with variable speed control or to start and synchronize multiple motors. It also gives you the ability to soft start large motors.

Read More

 

 

Latest Articles

  • Prev
There’s a contaminant that has long troubled water and wastewater operations, and you ...
  This April, while attending the Hannover Messe Trade fair, Drives and Control ...
  A Massachusetts-based municipal water treatment facility needed to upgrade their aging ...
  It goes without saying that materials transport in industries like consumer electronics, ...
  Do you have a countdown for when your critical assets are expected to fail? What could ...
Innovative machine design is integral to the success of any machine builder. Smart machine design ...
  How fast can we get it? It’s the number one question that comes after ...
  Safety used to be treated somewhat as an afterthought, in that it was added as a separate ...
Smarter, easier, cleaner… When a person looks at how everything has changed over time, it ...

Motor Feature


As a leading manufacturer of drive technology, we also supply mechanical variable-speed gearmotors. For both series, VARIBLOC®and VARIMOT®, you can easily infinitely adjust the speed mechanically using a handwheel or remote control.

Speeds of up to 45 kW can be easily adjusted mechanically

Mechanical variable-speed gearmotors are simple yet robust drive components that represent an inexpensive alternative in many materials handling and process engineering applications. This is because you control the speed infinitely variably yourself: mechanically using a handwheel or via remote control. The process does not involve any costly control cabinets or frequency inverters at all.

Read More

Latest News

  • Prev
Endress+Hauser Canada will build a new $28 million, Customer Experience Centre a stone’s ...
  If you are lucky, there will be a veteran in your shop that will pass their knowledge of ...
WECO Electrical Connectors Inc. has been in business for close to 100 years, and designs ...
  Parker Hannifin has introduced its class-leading HLR (High Load Rodless) actuator series ...
As our world reinvents itself daily, Rockwell Automation, the world’s largest company ...
Electromate was pleased to announce it had been recognized as the 35th Best Workplace on ...
EcoStruxure Machine Advisor is a cloud-based services platform which allows machine manufacturers ...

Rittal & EPLAN Pump out a Powerful Solution for Metro Vancouver

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil