Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

January 24, 2019

Kollmorgen will feature the latest motion innovations designed for the meat, poultry, and feed industries at Booth B7820 at the International Production & Processing Expo (IPPE), February 12 – 14, 2019, at the Georgia World Congress Center in Atlanta.

Throughout the show, Kollmorgen will exhibit:

AKMH Hygienic Servo Motor: The stainless steel AKMH is designed for splash zones and food contact. Its rugged design, corrosion-resistant stainless steel, and IP69K rating withstand the most rigorous washdown environments. OEMs benefit from reduced cleaning time and increased uptime. Most importantly, the risk of food recall is significantly reduced by the AKMH superior hygienic design. Visitors to the booth can also see a demo of an AKMH retrofit.

AKM 2G Servo Motor: Kollmorgen’s next-generation, high-performance synchronous servo motor. With increased power density and improved torque/speed ratio, OEMs can get up to 30% more performance out of equivalent size motor or achieve same performance with a smaller motor. With six frame sizes with up to five stack lengths and performance rates 0.3 and 10kW, and selectable options such as feedback, mounting, and performance capabilities, the AKM2G can easily be dropped into existing designs. AKM2G motors are optimized for use with the Kollmorgen AKD Servo Drive and the AKD 2G family of next-generation servo drives and are also capable of providing all their design benefits in conjunction with the customer’s choice of servo drives.

AKM Synchronous Servo Motor: Industry-leading power density, combined with more than 500,000 standard products, practically unlimited co-engineered modifications, and plug-and-play motor recognition make the AKM an easy choice for a wide variety of design requirements.

AKM Washdown and Food Grade Servo Motor: This motor incorporates Kollmorgen’s AKM electromagnetics within a housing protected by an FDA-approved 2-K coating and IP67-rated seal configuration for applications with strict hygiene regulations. No additional cover or special protection is required for the motor casing. Stainless steel hardware is used on all precision interfaces (motor shaft, screws and connectors). Available in a wide range of standard lengths, windings, feedback systems, and connection technologies.

Visitors are also invited to pick up a copy of Kollmorgen’s informative white paper Scientifically Hygienic: Improving Machine Design Through Improved Component Design.

Kollmorgen experts will be available throughout the show at booth #B7820 to answer questions and discuss applications. Advance meetings can be scheduled by contacting Doug Pike, Eastern Sales Manager, at doug.pike@kollmorgen.com.


Editor's Pick: Featured Article


DCS Lafert Formally Introduces New Plant in San Dona di Piave 1 400x275

The new production plant is officially in operation after its formal unveiling at Lafert’s 60th anniversity celebrations in San Donà di Piave, Italy, close to the historic headquarters. 

The 130 000 sq foot plant was developed to increase production capacity and meet the growing demand for IE5 Super Premium Efficiency motors, while also providing new storage areas for raw materials and finished products. In this plant alone, Lafert is able to produce up to 1400 pieces per day and can ship 4-5 international containers per week thanks to the internal customs area. 

The project began in September 2020 with the aim of building a brand-new manufacturing plant to produce high efficiency permanent magnet motors, specifically intended for pumping applications. The plant was designed and built with extensive automated production capabilities including fully automated production lines. Today the plant employs 50 operators who have been carefully trained to work in synergy with the production lines. The plant delivers maximum comfort in the working conditions of the operators in terms of light, space, services, and other factors that affect the well-being of employees. 

 

To read more about this challenge, and the solution, click here 


 


Sponsored Content


Convenient Power Infeed and Distribution 

Siemens DCS Aug3 Kerwill CP Ad 2 300x250 copy

 

 

The 3RV29 infeed system is based on a basic module complete with a lateral incoming supply unit (three-phase busbar with infeed). Expansion modules (three-phase busbars for system expansion) are available for extending the system.

 

 

To learn more, click here

 

 


 

Latest Articles

  • Prev
  Traditional wiring relying on cable connections that require loads of space is a ...
  The way we generate power has been undergoing a radical shift over the last few years ...
  Trash compactors are one way that we can improve the environment by reducing the volume ...
  Robots are an integral part of the manufacturing industry worldwide to the extent ...
  The Endress+Hauser Customer Experience Centre is Zero Carbon Building (ZCB) – ...
  The Ontario government has concluded a successful trade mission to South Korea and ...
  ABB and Hydrogen Optimized Inc. (HOI), the Canadian technology innovator unlocking ...
  What’s the secret to providing superior service and staying competitive in a changing ...
  When the Swiss engineering company Peter Huber AG won the order to upgrade and ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...

Latest News

  • Prev
  Traditional wiring relying on cable connections that require loads of space is a ...
  The Endress+Hauser Customer Experience Centre is Zero Carbon Building (ZCB) – ...
  The Ontario government has concluded a successful trade mission to South Korea and ...
  ABB and Hydrogen Optimized Inc. (HOI), the Canadian technology innovator unlocking ...
  World leaders from government and industry will meet in the southern Denmark city of ...
  The ABB #BuildtheFuture Roadshow delivers the latest electrical products, services, ...
  Global industry is accelerating its investment in energy efficiency in the next five ...
  In March 2022, the new edition of the installation standard IEC 61918:2018/AMD1:2022 ...
  On this episode of the Allied Expert Advice podcast, Carlos Riano, Senior Offer ...
  Advanced Micro Controls Inc. (AMCI) has realized growth throughout the Midwest United ...

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil