Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

November 15, 2018

Balluff's family of high-temperature proximity sensors are designed and tested to provide reliable non-contact object detection in ambient temperatures up to 230 °C/446 °F. This level of protection is required for hot metal stamping, glass manufacturing, steel and aluminum manufacturing, steel forging, steam curing, and other high-temp processes.

Two main features allow these sensors to withstand extreme temperatures: First, the face of each sensor is composed of a heat-resistant LCP (liquid crystal polymer) material; Second, the head of the sensor contains only the passive, non-electronic, components of the device that are less susceptible to heat. The electronic amplifier portion of the sensor is located at the far end of the 5 meter/16 foot connector cable, allowing you to place it outside the high-temperature zone. The cable jacket and insulation, made from heat-resistant PTFE, is specified to withstand the same temperature as the sensor head.

Sensors that have electronics built into the sensor head are usually rated to not exceed 70 °C/158 °F. If your kitchen is hotter, high-temperature rated sensors are better equipped to combat the malfunctioning, failure, and machine downtime that often occur when sensor electronics exceed their rated limits.

This group is available in M8, M18, M30 tubular housings with an integrated 5 meter amplifier connector cable, and in a block style with a detachable 10 meter/33 feet amplifier connector cable (ordered separately).

Key Features:

  • Ideal for high ambient temperatures up to 230 °C/446 °F
  • Sensor face composed of high-temperature LCP
  • Extended 5m/16ft. amplifier-connector cable keeps electronic components at a safe distance from hot process areas
  • Cables composed of heat-resistant PTFE
  • M8, M18, M30 and multiple block-style housings available
  • Standardized M12 connection for simple installation and replacement

Editor's Pick: Featured Article


DanfossWith more than one million square feet of exhibit and meeting space, the LEED Platinum-certified Enercare Centre at Exhibition Place in Toronto, Ontario, is the ninth-largest convention centre in North America. Located on the shores of Lake Ontario, the convection centre experiences the extreme weather that the Great Lakes region is known for – with temperatures ranging from -31°C (-24°F) to 40°C (105°F).

That puts a big burden on Exhibition Place’s HVAC equipment to keep the pace comfortable for more than 5.5 million visitors attending meetings, conventions, and exhibitions throughout the year. 

Read More

 

 

Latest Articles

  • Prev
 When selecting a motor, it is important to consider the required duty cycle to ensure the ...
  Last fall Drives & Control Solutions had the opportunity to tour Yaskawa America’s ...
ABB is proud to announce it has been selected as one of Canada’s Best Employers by Forbes Magazine ...
There are two types of electric motors, alternating current (AC) and direct current (DC). AC motors ...
  With more than one million square feet of exhibit and meeting space, the LEED ...
As an engineer, the responsibility to adopt not just the latest, but the safest technologies, never ...
Keeping pace with significant advances in motor speed control technologies, the International ...
What would a world without internal combustion engines look like? While this is not the current ...
There’s a contaminant that has long troubled water and wastewater operations, and you ...

Motor Feature


50 HP 1-to-3 Microgrid Power Source Single Phase Power Solutions introduces the 50 HP 1-to-3 Microgrid Power Source featuring a patented BELLE Motor with Written-Pole technology to deliver three-phase power from single-phase utility service. The 50 HP 1-to-3 can be used to operate a 25 HP motor three-phase motor, and multiple other motors up the remaining 25 HP of capacity. Ideal for areas without three-phase service, this revolutionary approach eliminates the high fuel and maintenance costs, and the pollution of fossil-fuel-powered Gen-Sets, while delivering superior power quality to that of a conventional phase converter.  It is far more cost effective than extending 3-phase power where it is not currently available. 

Latest News

  • Prev
ABB is proud to announce it has been selected as one of Canada’s Best Employers by Forbes Magazine ...
Keeping pace with significant advances in motor speed control technologies, the International ...

Rittal & EPLAN Pump out a Powerful Solution for Metro Vancouver

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil