Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

October 17, 2022

 

DCS QA with HELU Robotic Dress Packes 1 400x275

Robots are an integral part of the manufacturing industry worldwide to the extent that they are indispensable. In production, robots and cobots frequently encounter each other, working and interacting side by side with humans, but also performing tasks independently. The latest industrial robots move in a three-dimensional space and can therefore perform a wide variety of tasks. In order to ensure optimum system performance, the use of a dress pack is required to keep a robot running as frequently as possible. Regional Sales Manager Gordon Post discusses some of the questions he hears in the field about robotic cable protection systems.

Q: What is a robotic dress pack and what is its primary function?

A: Dress packages (a.k.a. dress outs, umbilicals, utility supply systems, etc.) provide an organized way of protecting the fill package from environmental hazards. They are tasked with protecting, managing, securing and guiding cables and hoses over millions of work cycles. As a ready-to-install assembly that is uniquely designed to match the application, dress packs are vital in reducing preventative maintenance downtime. Any industrial robotic application where an End Of Arm Tool (EOAT) needs various supply lines such as servo power, welding power, water or air supply, Ethernet communication, etc. would be in need of a dress pack.

Q: What typically is required in a fill package when dressing out a robot?

DCS QA with HELU Robotic Dress Packes 2 540x533

A: In order to mitigate failures in the best way possible, it is important to select solutions from an application-specific, as well as an overall system, point of view. In other words, each robot has a task to perform. Therefore, dress packs should be specifically designed around the complete work cycle of each task.

If we use resistance spot welding (RSW) as an example, you will have an insulated cable assembly, which consists of two high-power cables and a ground cable, that connects to the spot-welding gun. Furthermore, you would need water in and water out hoses, which depending on the customer’s configuration, could be two or three hoses. The weld gun actuator uses a servo motor that requires a double-ended motor power and feedback cable assemblies. Finally, depending again on the customer’s requirements, a three-conductor cable for secondary voltage feedback is used as well. All of these cables and hoses will go inside plastic conduct that guides them around the robot and helps protect them from getting tangled up as the robot twists and turns and in this case from any weld spatter that might occur during the welding process.

Dress packages provide an organized way of protecting the fill package from environmental hazards

Q: For the automotive industry how does the dress requirement for robots differ from non-automotive? What makes this industrial application unique?

A: The automotive industry uses these processes as well, but also introduces other stressors to the robot, which adds to the factors that must be taken into account when designing a dress pack. Automotive manufacturing uses a lot of different joining solutions that include spot welding, riveting, laser welding, stud welding, projection welding, adhesive dispense, MIG welding, and more that require specific robot dress cables and hoses for each application. Additionally, robots are used in the paint shop, which exposes them to other chemicals – lacquers, paint, etc. – that can be detrimental to operations if the cables and hoses are not properly protected.

To sum up, the dress packs have to endure a lot of abuse in the automotive manufacturing environment and must be able to hold up to avoid any downtime.

Q: Serviceability and cost are important for dress pack installations, what other factors make a manufacturer/supplier stand out when designing a robotic cable protection system?

A: As discussed previously, initial design and development should encompass an application-specific, as well as an overall system, point of view. Not all “out-of-the-box” systems, which are based on a robot model, are suited for the application the robot is being used. Having a manufacturer that is willing to start from scratch and understand the customer’s requirements for the cables, connectors, pinouts, hose types, and overall protection system mounting and routing for each application is a plus. Supporting the integrators or robot company(s) for the initial stages is key to providing accurate mechanical and electrical prints so that the installation goes smoothly. This is critical so that all the cables plug in correctly and all the signals work properly.

Additional areas that make a supplier stand out are managing the orders for on-time delivery, technical training, and support for optimization of the dress packs.

Q: Based on current trends, what advancements in dress pack technology are occurring?

DCS QA with HELU Robotic Dress Packes 3 540x352

A: There are more robots being deployed in industrial applications than ever before when you look at heavy-duty robots and lightweight cobots out in the field. More robots are being used in manufacturing for vision and collaborative applications so this will drive more robot dress packs to be developed in order to support these applications.Another trend that is being monitored is inside dress options for the hollow arm robot models that are being used for such applications as spot welding or material handling. The hollow arm allows for a completely internal cable routing.

Initial design and development of a robot’s dress pack should encompass an application-specific, as well as an overall system, point of view. Not all “out-of-the-box” systems, which are based on a robot model, are suited for the application the robot is being used

Q: Can you discuss the pros and cons of external dress packs versus internal dress pack systems?

A: External dress packs are quick to assemble as all mounting areas are easily accessible. They are also easy to service in the event of a cable or hose failure e.g. torn conduit can be fixed using an impact protector for minimal downtime. Conversely, external dress packs are exposed causing them to take up more space, and if not suited for the application can rub on the robot, tooling or other robots. Understanding the entire system and application to build a customer-specific solution can minimize these risks compared to some “one-size-fits-all” or “out-of-the-box” solutions.

Internal dress packs are protected using the robot arm cavity to avoid any unwanted rubbing and strenuous environmental effects. Because they use the robot’s internal structure, the overall system has fewer parts, such as no spring return for example. On the downside, internal dress packs are more difficult to assemble since space is restricted and in the event of a cable or hose break, they can take longer to repair.

 

Source

HELUKABEL Logo 300x150

 

 

 


Editor's Pick: Featured Article


DCS Lafert Formally Introduces New Plant in San Dona di Piave 1 400x275

The new production plant is officially in operation after its formal unveiling at Lafert’s 60th anniversity celebrations in San Donà di Piave, Italy, close to the historic headquarters. 

The 130 000 sq foot plant was developed to increase production capacity and meet the growing demand for IE5 Super Premium Efficiency motors, while also providing new storage areas for raw materials and finished products. In this plant alone, Lafert is able to produce up to 1400 pieces per day and can ship 4-5 international containers per week thanks to the internal customs area. 

The project began in September 2020 with the aim of building a brand-new manufacturing plant to produce high efficiency permanent magnet motors, specifically intended for pumping applications. The plant was designed and built with extensive automated production capabilities including fully automated production lines. Today the plant employs 50 operators who have been carefully trained to work in synergy with the production lines. The plant delivers maximum comfort in the working conditions of the operators in terms of light, space, services, and other factors that affect the well-being of employees. 

 

To read more about this challenge, and the solution, click here 


 


Sponsored Content


Convenient Power Infeed and Distribution 

Siemens DCS Aug3 Kerwill CP Ad 2 300x250 copy

 

 

The 3RV29 infeed system is based on a basic module complete with a lateral incoming supply unit (three-phase busbar with infeed). Expansion modules (three-phase busbars for system expansion) are available for extending the system.

 

 

To learn more, click here

 

 


 


  

DCS Sonepar Acquires Aztec Electrical Supply 1 400x275

Sonepar has announced that its wholly-owned Canadian subsidiary, Sonepar Canada, Inc. has acquired Aztec Electrical Supply Inc. (“Aztec”). With a strong presence in the province of Ontario, the acquisition of Aztec will strengthen Sonepar’s ability to grow their industrial business model across the Greater Toronto Area.

Founded in 2002, Aztec expanded its market presence across Ontario opening four branches located within Vaughan, Cambridge, Mississauga, and Burlington. Aztec will add over 100 associates to the Sonepar network in Canada and is expected to record sales revenues of over $70 million in 2022.

 

Read more here


 

Product News

  • Prev
  Reported as the only range on the market providing a common platform from 1HP – ...
  AutomationDirect has proudly entered the industrial vision market with the addition ...
  Magna’s 48 Volt hybrid transmission hit the market on the Jeep Renegade, Compass ...
  Recently Emerson announced the release of its new Clean In Place (CIP) Utilities ...
  This is where ASi meets IoT: The new ASi-3 gateway from Pepperl+Fuchs ...
  Your safety circuit is easy to create on the PC using the PNOZmulti Configurator. The ...
  With the integration of OPC UA Reverse Connect into its dataFEED OPC Suite Extended ...
Introducing the CWG Series Type 1 Galvanized Lay-In Wireway from Hammond Manufacturing, with a ...
  ABB recently announced enhancements to their flagship ReliaGear LV MCC low voltage ...
  Piezo Motion recently announced an important update to its popular line of ...

New Product

DCS New LUTZE DRIVEFLEX and MOTIONFLEX VFD Cables from Automation Direct 1 400x275

AutomationDirect has added new LUTZE DRIVEFLEX® and MOTIONFLEX® variable frequency drive cables which provide supreme protection against electromagnetic interference (EMI).

These cables are available in 18 to 8 AWG sizes and include four black conductors with a green/yellow ground conductor of the same gauge. Each conductor is labeled for easy identification and is covered in a cross-linked Polyethylene (XLPE) insulation (type XHHW-2) that is oil and sun resistant, suitable for dry, damp, or wet locations, and approved for direct burial.

The DRIVEFLEX series has a black PVC outer jacket ideal for stationary applications, while the MOTIONFLEX series has a black thermoplastic elastomer (TPE) outer jacket designed for continuous motion applications. Both cables are tray cable-exposed run rated (TCER) for use in cable trays with or without conduit, which can significantly reduce installation costs.

The new DRIVEFLEX series cable starts at $2.58 /ft. and the MOTIONFLEX series cable starts at $3.67 /ft.  Both cables are made in the USA and can be ordered cut to length in 1-foot increments with a 10ft minimum.


To read more, click here


 


Featured Product

DCS Omrons New Integrated Controller Capable of Controlling Robots and Entire Automation Systems 1 400x275

Omron has recently introduced its most full-featured machine automation controller to date. Offering control of multiple robots, the choice of 16, 32, or 64 controlled motion axes, and SQL connectivity. It is the ideal control solution for complete robotic cells, high-speed motion systems, material handling and multi-robot systems.

The Robotics Integrated Platform is the next revolutionary step in the SYSMAC ecosystem that seamlessly integrates the full Omron Fixed Robotics product line. Their one controller approach integrates robot control, in addition to sequence and motion control, to a single controller. This enables synchronized control of robots as well as other devices and results in higher performance compared to typical network based configurations. It also enables users to collect information on devices aligned to a common timeline which not only improves overall system response times and accuracy but also greatly aids in troubleshooting activities.


To read more, click here


 

Latest News

  • Prev
  Traditional wiring relying on cable connections that require loads of space is a ...
  The Endress+Hauser Customer Experience Centre is Zero Carbon Building (ZCB) – ...
  The Ontario government has concluded a successful trade mission to South Korea and ...
  ABB and Hydrogen Optimized Inc. (HOI), the Canadian technology innovator unlocking ...
  World leaders from government and industry will meet in the southern Denmark city of ...
  The ABB #BuildtheFuture Roadshow delivers the latest electrical products, services, ...
  Global industry is accelerating its investment in energy efficiency in the next five ...
  In March 2022, the new edition of the installation standard IEC 61918:2018/AMD1:2022 ...
  On this episode of the Allied Expert Advice podcast, Carlos Riano, Senior Offer ...
  Advanced Micro Controls Inc. (AMCI) has realized growth throughout the Midwest United ...

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil