Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

DCS CG sensor 400Sept 1, 2020

CARLO GAVAZZI's new Capacitive Proximity Sensors with Integrated IO-Link communications build on their existing range of sensors, these new sensors are housed in durable AISI316L stainless steel housings or PTFE Teflon housings for high chemical resistance.

Based on their 4th generation TRIPLESHIELD™ sensors, the CA18 and the CA30 Series sensors represent the ideal solution for industrial automation equipment in applications where the sensing performance needs to be constantly and accurately monitored and logged.

Besides the full range of technical features provided by capacitive sensor families, the IO-Link communication mode enables additional advanced functionalities such as: QoR (Quality of Run), QoT (Quality of Teach) and diagnostic parameters. With IO-Link, each sensor becomes fully programmable and customizable, allowing more than half a million setting combinations.

The Capacitive Proximity Sensors with Integrated IO-Link feature:

  • M18 and M30 in AISI316L stainless steel or PTFE housings
  • Programmable sensing distance and hysteresis
  • Sensing mode: single point, two point and windows mode
  • Logic functions: AND, OR, XOR and 'Gated SR/FF'
  • Timer functions: ON, OFF and One shot
  • Configurable output/input: NPN, PNP, Push-Pull and external input
  • Alarm outputs: temperature and dust - with adjustable set points
  • Logging functions: temperatures, operational hours, power cycles, configuration changes
  • Detection filter
  • Application modes: Standard, Plastic or Level applications
  • Quality of Run (QoR) and Quality of Teach (QoT)
  • 2 m PVC cable or M12-plug
  • IO-Link communication V 1.1

The new IO-Link Capacitive Sensors series have been designed to be used in specific markets such as Plastic and Rubber, HVAC, Agriculture and Food and Beverage, providing the ideal solutions to perfectly fit any application need.

The Capacitive Sensors with IO-Link are available from Carlo Gavazzi’s network of sales offices and distributors in the Americas, or at www.GavazziOnline.com

More information on these new products can be found from the links below:

 

Allied Motor MaintenanceSmall motors – both AC and DC – serve as critical points in industrial operations. They may be integral to automation and equipment control and serve multiple purposes to mechanically drive and actuate systems and equipment, but are often replaced rather than repaired or reconditioned.

Larger motors may be repaired, rewound, and sent into a motor rewind pool.  However, many motors will simply be replaced when imminent signs of failure are detected using smart equipment, instrumentation, and tools discussed below.

 

 

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil