Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

Hannover Messe powertrans 400

February 25, 2019

Manufacturers of power transmission and fluid power technologies provide components that are absolutely essential to the quality and reliability of industrial plant and machinery. For the first time ever at HANNOVER MESSE, virtually every aspect of the power transmission and fluid power industry will be featured in the northern exhibition halls that are home to the IAMD (Integrated Automation, Motion & Drives) show. The displays there will revolve around smart hydraulic, pneumatic, actuator and drive components for manufacturing – in other words, critical building blocks for efficient, fault-free Industry 4.0 production.

The power transmission and fluid power section of the IAMD show will feature around 1,000 exhibitors and occupy halls 20 through 25. The exhibits on display will illustrate the steady transformation of tried-and-proven mechanical components and systems into intelligent mechatronic components and systems. "Worldwide, HANNOVER MESSE is the only platform where components and systems fundamental to industrial plant, machinery and electrical systems are presented in an integrated fashion alongside digital technologies from software providers and IT companies," explains Dr. Jochen Köckler, Chairman of the Managing Board of Deutsche Messe as the organizers of HANNOVER MESSE.

"HANNOVER MESSE enables providers of power transmission and fluid power systems to network with providers of sensor, electronics and IT solutions, so that together they can better harness the power of digitization in the interests of technological convergence. This is important, because the market is increasingly calling for intelligent mechatronic systems, not must mechanical drive technology."

HANNOVER MESSE is the most important trade fair and dialogue hub for the power transmission and fluid power industry. Exhibitors from this industry benefit enormously from the IAMD show's synergies with other shows taking place under the umbrella of HANNOVER MESSE. They also benefit from dialogue with the high-level business and political leaders who are naturally drawn to HANNOVER MESSE as the world's leading trade fair for industrial technology. This year, a key part of this mix is the participation of a highly industrialized nation as Partner Country : Sweden. Sweden and Germany have a long history of close cooperative ties, a key relationship that was further strengthened at the start of 2017 with the signing of an innovation partnership agreement. Under the agreement, the two countries have pledged to cooperate at political, economic and institutional level. The partnership encompasses several key areas, including mobility, ongoing digital development of industry, joint research activities, Industry 4.0 test projects and the fostering of digitization and automation in small and mid-sized companies.

Sweden's economy is growing steadily. On an international comparison, the country places near the front of the pack on all scores, from business climate to startups, and its strengths in terms of innovation and quality of life make its companies highly desirable trade and investment partners.

Quite apart from the Partner Country showcase, the number of Swedish companies exhibiting at HANNOVER MESSE has doubled over recent years. This is due in some measure to the Swedish Energy Agency, which this year, for the second year running, is staging national pavilions in the Integrated Energy and Industrial Supply sections of the show.

Go HERE for more information

Latest Articles

  • Prev
Join in with Rittal to sharpen up your IT & Industrial infrastructure, as well as your mission ...
Certified Electrical Safety Engineer (CESE) is an internationally recognized professional ...
Common in most industrial settings, electric motors are broadly grouped as those driven by ...
Machine safety is one of the most important requirements in factory automation and it can also be ...
Allied Electronics & Automation has strengthened its robust roster of more than 500 world-class ...
ABB has recently been awarded a major turnkey contract by Statkraft, Europe’s largest generator of ...
Traditionally, many industrial companies have relied on their service providers to help keep their ...
Some ten billion bearings are manufactured each year and, given the harsh conditions to which they ...
Keeping workers safe and keeping the production line going may seem contradictory, but in most ...
The design of HVAC systems poses unique challenges for things like motor control and circuit ...

PB-42-Allied-ECIANewGlobalMember-400.jpg

Electronic Components Industry Association (ECIA) was recently pleased to announce that Electrocomponents plc, a global omni-channel solutions partner for electronics, industrial and automation customers and suppliers has joined the association as a global member, along with its subsidiaries Allied Electronics & Automation (Allied), a distributor of automation and control, electronic, electrical, mechanical, and maintenance products in North America and RS Components (RS), a global distribution partner for industrial customers and suppliers involved in designing, building or maintaining industrial equipment and facilities.

Electrocomponents will be represented on the ECIA by Chris Beeson, Senior Vice President of Electronics at RS. Peter Malpas, EMEA Regional President for RS; Sean Fredricks APAC Regional President for RS; and Ken Bradley President of Allied in the Americas will represent their respective regions.

“We recognize the importance of partnering with other industry leaders in electronics manufacturing and distribution to stay on the cutting edge of technology for the wide-ranging benefit of our customers,” said Beeson. “Membership in ECIA allows Electrocomponents, Allied and RS to have a seat at the table with other global distribution and manufacturing leaders to solve problems and advance our industry.”

“We are excited to work alongside our distributor peers and suppliers as ECIA tackles critical industry issues and global technical standards,” said Bradley. “This is an excellent opportunity to focus our collective power on customer-facing challenges we can solve together.”

Read More


 

Product News

  • Prev
Introducing Eaton’s Pow-R-Line CS switchboard, the most compact, expandable, service entrance and ...
Add or remove switchboard structures according to your construction needs, such as the main ...
Many manufacturers use time-consuming and potentially dangerous manual processes to inspect servo ...
A new module for bending angle measurement is now available for the camera-based protection system ...
HPS Drive Isolation Transformers, are designed to meet the rugged demands of both AC and DC ...
The VS-AVT-C08-L10 VeriSafe Absence of Voltage Tester is the first-of-its-kind voltage tester that ...
SIMATIC HMI Comfort Panels are designed for implementation of high-performance visualization ...
As a leading manufacturer of drive technology, we also supply mechanical variable-speed gearmotors. ...
The Single Phase ODP motor is designed for applications requiring high starting torque. Some ...
Bender, a manufacturer of electrical safety products worldwide, has recently released a new ...

New Product

DCS-23-Pilz-PSENoptIISafetyLightCurtains-400.jpg

The second generation of safety light curtains, PSENopt II, provide safe access to the production process and provide finger, hand and body protection, depending on the requirement. The first Type 3 safety light curtains are specifically designed for applications up to PL d of EN/IEC 61496-1. Type 4 light curtains are also available for applications up to PL e of EN/IEC 61496-1/-2.

As the units are so robust, PSENopt II sensors provide protection against shock, collision and vibration and so are suitable for use in rugged industrial environments. The operator can evaluate the essential causes and system defects responsible for the machine stop by means of the LEDs. Downtimes are reduced as a result.

The safety light curtains are available in lengths from 150 mm to 1800 mm. In combination with the configurable control system PNOZmulti 2 you have a safe, complete, one-stop solution. Compatible accessories range from installation assistance through to mirror columns.

New: Accessory for the light curtain PSENopt II to prevent restart

With our new accessory PSENopt II lockout for the PSENopt II range of light curtains you can prevent the machine restarting. This is necessary, for example, when carrying out maintenance work within the danger zone. PSENopt II lockout consists of an assembly unit that is attached to the side of the light curtain like a swivel arm. If the danger zone is accessed, the swivel arm can be folded out in front of the light curtain’s field of vision and fitted with a lock. As a result the light curtain no longer has a free field of vision, so start up is prevented.

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil